Structure of the pump tube
(1) Handwheel - for quick assembly/disassembly of the motor
(2) Outrun piece - connection
(3) Outer tube
(4) Drive shaft - optionally stainless steel or HC
(5) Sealing system - either mechanical seal or sealless
(6) Impeller - axial (rotor) or radial (impeller)
(7) Pump foot
Select a category
Our products
Our complete range of pump tubes
New
Battery
Pump tube set
Pumping tube set 20/30 L
Ideal for 20/30 litre canisters
Canister pump tubes
The new battery-powered canister pump offers a clean and safe solution for emptying canisters quickly. With a replaceable battery and quick-release fastener, the pump remains flexible and easy to use. Perfect for use on different containers without causing contamination.
Highlights at a glance:
Simple and quick change of the battery-powered drive unit
Can be used anywhere without a power source
No contamination of the media and the surrounding area
Quick and easy to use thanks to lightweight equipment
Ergonomic filling
Infinitely variable to reduce the risk of accidents caused by splashing
precise filling/dosing of small quantities possible
Canister pumps
for clean and fast emptying of canisters & small drums
Various lengths available: 440 mm, 500 mm, 700 mm
Flexible hose set with ball valve
precise filling/dosing of small quantities possible
HC Wave
ROTOR
Pump tube PVDF
for concentrated acids and alkalis
Description:
The Lutz pumping station (PVDF) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various motors are available that you can combine with the pumping station at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pumping unit equipped with Lutz original handwheel
Features & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped liquid by lubricants
Optimised drum emptying
Universally resistant PTFE shaft bearing
Maintenance without special tools
Seal modules of the mechanical seal-sealed (GLRD) or seal-less (DL) pump are interchangeable
PVDF
ROTOR
Pump tube PVDF
Fits: B2 Vario and B2 Battery
Description:
The Lutz pumping station (PVDF) is suitable for low-viscosity, concentrated acids and alkalis. With the appropriate motor, it is suitable for medium to large filling volumes. Depending on the requirements, the pumping station can be operated with the B2 Vario electric motor or the B2 Battery version.
Examples of media: Chloric acid, chromic acid, sulphuric acid. Nitric acid, hydrofluoric acid, etc.
for removing small quantities from hobbocks, canisters and drums
suitable for motor B2 Vario and B2 Battery
Features & advantages
No lubricants and therefore no contamination of the pumped liquid
Optimised drum emptying
Maintenance without special tools
Universally resistant shaft bearing made of ETFE/PTFE
Sealless design (DL) conditionally dry-running safe
HC Wave
Impeller
Pump tube PVDF
for concentrated acids and alkalis
Description:
The Lutz pumping station (PVDF) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various motors are available that you can combine with the pumping station at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pumping unit equipped with Lutz original handwheel
Features & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped liquid by lubricants
Optimised drum emptying
Universally resistant PTFE shaft bearing
Maintenance without special tools
Seal modules of the mechanical seal-sealed (GLRD) or seal-less (DL) pump are interchangeable
Stainless steel shaft
Impeller
Pump tube PP for mixing and pumping
for low-viscosity alkaline solutions
Description:
The drum pump is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various motors are available which can be combined with the pumping unit at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pumping unit equipped with Lutz original handwheel
Suitable for mixing and pumping oils such as rapeseed oil and vegetable oil
Features & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped medium by lubricants
Two functions (pumping and mixing) in one device
No leaks if the pumping unit is tilted or moved
High mixing and conveying capacity for thorough homogenisation
switching between the pumping and mixing functions takes place without interrupting ongoing operation, which is made possible by a small lever on the handwheel
HC Wave
Impeller
Pump tube PP for mixing and pumping
for low-viscosity acids
Description:
The Lutz pumping station (PP) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various motors are available which can be combined with the pumping station at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pumping unit equipped with Lutz original handwheel
Suitable for mixing and pumping oils such as rapeseed oil and vegetable oil
Features & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped medium by lubricants
Two functions (pumping and mixing) in one device
No leaks if the pumping unit is tilted or moved
High mixing and conveying capacity for thorough homogenisation
switching between the pumping and mixing functions takes place without interrupting ongoing operation, which is made possible by a small lever on the handwheel
HC Wave
ROTOR
Pump tube PP for mixing and pumping
for low-viscosity acids
Description:
The Lutz pumping station (PP) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various motors are available which can be combined with the pumping station at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pumping unit equipped with Lutz original handwheel
Suitable for mixing and pumping oils such as rapeseed oil and vegetable oil
Features & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped medium by lubricants
Two functions (pumping and mixing) in one device
No leaks if the pumping unit is tilted or moved
High mixing and conveying capacity for thorough homogenisation
switching between the pumping and mixing functions takes place without interrupting ongoing operation, which is made possible by a small lever on the handwheel
Stainless steel shaft
ROTOR
Pump tube PP for mixing and pumping
for low-viscosity alkaline solutions
Description:
The Lutz pumping station (PP) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various motors are available which can be combined with the pumping station at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pumping unit equipped with Lutz original handwheel
Suitable for mixing and pumping oils such as rapeseed oil and vegetable oil
Features & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped medium by lubricants
Two functions (pumping and mixing) in one device
No leaks if the pumping unit is tilted or moved
High mixing and conveying capacity for thorough homogenisation
switching between the pumping and mixing functions takes place without interrupting ongoing operation, which is made possible by a small lever on the handwheel
Stainless steel shaft
Impeller
Pump tube PP for Complete drainage
for low-viscosity alkaline solutions
Description:
The Lutz pumping station (PP) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various motors are available that you can combine with the pumping station at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 400 - 1500 mm
Pumping unit equipped with Lutz Original handwheel
Suitable for emptying drums of oils such as rapeseed oil and vegetable oil
Features & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped liquid by lubricants
Optimised drum emptying with a residual quantity of approx. 0.1 litre
No leaks if the pumping station is tilted or moved
Maximum product utilisation with reduced barrel cleaning and disposal costs
Sealing module of the mechanical seal pump (GLRD) can be replaced
HC Wave
Impeller
Pump tube PP for Complete drainage
for low-viscosity acids
Description:
The Lutz pumping station (PP) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various motors are available that you can combine with the pumping station at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 400 - 1500 mm
Pumping unit equipped with Lutz Original handwheel
Suitable for emptying drums of oils such as rapeseed oil and vegetable oil
Features & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped liquid by lubricants
Optimised drum emptying with a residual quantity of approx. 0.1 litre
No leaks if the pumping station is tilted or moved
Maximum product utilisation with reduced barrel cleaning and disposal costs
Sealing module of the mechanical seal pump (GLRD) can be replaced
Stainless steel shaft
Impeller
Pump tube PP
for low-viscosity alkaline solutions
Description:
The Lutz pumping station (PP) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various motors are available that you can combine with the pumping station at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pumping unit equipped with Lutz Original handwheel
Suitable for filling or decanting oils such as rapeseed oil and vegetable oil
Features & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped medium by lubricants
Optimised drum emptying
Universally resistant PTFE shaft bearing
Maintenance without special tools
Sealing modules of the mechanical seal (GLRD) or of the sealless (DL) pump interchangeable
HC Wave
Impeller
Pump tube PP
for low-viscosity acids
Description:
The Lutz pumping station (PP) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various motors are available that you can combine with the pumping station at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pumping unit equipped with Lutz Original handwheel
Suitable for filling or decanting oils such as rapeseed oil and vegetable oil
Features & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped medium by lubricants
Optimised drum emptying
Universally resistant PTFE shaft bearing
Maintenance without special tools
Sealing modules of the mechanical seal (GLRD) or of the sealless (DL) pump interchangeable
HC Wave
ROTOR
Pump tube PP
for low-viscosity acids
Description:
The Lutz pumping station (PP) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various motors are available that you can combine with the pumping station at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pumping unit equipped with Lutz Original handwheel
Suitable for filling or decanting oils such as rapeseed oil and vegetable oil
Features & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped medium by lubricants
Optimised drum emptying
Universally resistant PTFE shaft bearing
Maintenance without special tools
Sealing modules of the mechanical seal (GLRD) or of the sealless (DL) pump interchangeable
PP
Impeller
Pump tube PP
fits: B1 Battery
Description:
The Lutz pumping station (PP) is suitable for corrosive, aqueous to slightly viscous media. Perfect for dispensing or decanting very small quantities.
Examples of media: battery acid, ammonia water, photo developer, glycols, phosphoric acid, hydrochloric acid, hydrogen peroxide, etc.
Features & advantages
Operation with battery motor B1 Battery
Suitable for very small quantities
No lubricants and therefore no contamination of the pumped medium
Optimised drum emptying
Sealless design (DL) conditionally dry-running safe
Maintenance without special tools
Stainless steel shaft
ROTOR
Pump tube PP
for low-viscosity alkaline solutions
Description:
The Lutz Pump tube (PP) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various Motors are available, which you can combine with the Pump tube at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pump tubes equipped with Lutz Original handwheel
Suitable for filling or decanting oils such as rapeseed oil and vegetable oil
Properties & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped medium by lubricants
Optimised drum emptying
Universally resistant PTFE shaft bearing
Maintenance without special tools
Seal modules of the mechanical seal-sealed (GLRD) or seal-less (DL) Pump are interchangeable
PP
ROTOR
Pump tube PP
Fits: B2 Vario and B2 Battery
Description:
The Lutz pumping unit (PP) is suitable for low-viscosity, oil-based lubricants, cold cleaners and plasticisers. With the appropriate motor, it is suitable for medium to large filling quantities. Depending on requirements, the pumping station can be operated with the B2 Vario electric motor or the B2 Battery version.
Examples of media: Lubricants (oil-based), cold cleaners, plasticisers
For dispensing small quantities from hobbocks, canisters and drums
Suitable for motor B2 Vario and B2 Battery
Features & advantages
No lubricants and therefore no contamination of the pumped medium
Optimised drum emptying
Maintenance without special tools
Universally resistant shaft bearing made of ETFE/PTFE
Sealless design (DL) conditionally dry-running safe
PP
Impeller
Pump tube PP
Fits: B2 Vario and B2 Battery
Description:
The Lutz pumping unit (PP) is suitable for low-viscosity, oil-based lubricants, cold cleaners and plasticisers. With the appropriate motor, it is suitable for medium to large filling quantities. Depending on requirements, the pumping station can be operated with the B2 Vario electric motor or the B2 Battery version.
Examples of media: Lubricants (oil-based), cold cleaners, plasticisers
For dispensing small quantities from hobbocks, canisters and drums
Suitable for motor B2 Vario and B2 Battery
Features & advantages
No lubricants and therefore no contamination of the pumped medium
Optimised drum emptying
Maintenance without special tools
Universally resistant shaft bearing made of ETFE/PTFE
Sealless design (DL) conditionally dry-running safe
Foodstuffs
Explosion protection
ROTOR
Pump tube Niro for mixing and pumping - PURE
for Foodstuffs (PURE series)
Description:
The Lutz pumping unit for mixing and pumping (stainless steel) PURE is suitable for aqueous and fatty foods. Depending on the application, various motors are available which can be combined with the pumping unit at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pumping unit equipped with Lutz Original handwheel
for mixing and pumping alcoholic foodstuffs, cosmetics and pharmaceutical products as well as flammable cleaning agents
Properties & advantages
Physiologically safe design
Food-safe connections
High mixing and conveying capacity for thorough homogenisation
two functions (pumping and mixing) in one device
Approved according to FDA and Regulation (EC) 1935/2004
Approved in accordance with ATEX Directive 2014/34/EU, category 1/2
Explosion protection
ROTOR
Pump tube Niro for mixing and pumping
for flammable liquids
Description:
The Lutz pumping station (stainless steel) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various motors are available which can be combined with the pumping station at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pumping unit equipped with Lutz original handwheel
Suitable for mixing and pumping alternative fuels, oils and flammable liquids
Features & benefits
Also available with Tri-Clamp connection
Optionally with electric or compressed air drive
two functions (pumping and mixing) in one device
No leaks when the pump unit is tilted or moved
High mixing and conveying capacity for thorough homogenisation
switching between the pumping and mixing functions takes place without interrupting ongoing operation, which is made possible by a small lever on the handwheel
Foodstuffs
Explosion protection
Impeller
Pump tube Niro for Complete drainage - PURE
for Foodstuffs (PURE series)
Description:
The Lutz PURE pumping station for residual emptying (stainless steel) is suitable for aqueous and fatty foodstuffs. Depending on the application, various motors are available that you can combine with the pumping station at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pumping unit equipped with Lutz Original handwheel
for emptying drums for foodstuffs containing alcohol, cosmetics and pharmaceutical products as well as flammable cleaning agents
Features & advantages
Physiologically safe design
Food-safe connections
Optimised drum emptying with a residual quantity of approx. 0.1 litre
Maximum product utilisation with reduced drum cleaning and disposal costs
approved according to FDA and Regulation (EC) 1935/2004
approved according to ATEX Directive 2014/34/EU, category 1/2
Explosion protection
Impeller
Pump tube Niro for Complete drainage
for flammable liquids
Description:
The Lutz pumping station for residual emptying (stainless steel) is suitable for low-viscosity, flammable and explosive liquids. Depending on the application, various motors are available that you can combine with the pumping station at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pumping unit equipped with Lutz Original handwheel
Suitable for emptying drums of alternative fuels, oils and flammable liquids
Features & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped liquid by lubricants
Optimised drum emptying with a residual quantity of approx. 0.1 litre
No leaks if the pumping station is tilted or moved
Maximum product utilisation with reduced barrel cleaning and disposal costs
Sealing module of the mechanical seal pump (GLRD) can be replaced
Foodstuffs
Impeller
Pump tube Niro - PURE
for Foodstuffs (PURE series)
Description:
The Lutz pumping station (Niro) PURE is suitable for aqueous and fatty foods. Depending on the application, various motors are available that you can combine with the pumping station at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pumping unit equipped with Lutz Original handwheel
Also for food containing alcohol, cosmetics and pharmaceutical products as well as flammable cleaning agents
Features & advantages
physiologically safe design
High surface quality
Food-safe connections
No lubricants and therefore no contamination of the pumped liquid by lubricants
approved according to FDA and Regulation (EC) 1935/2004
Foodstuffs
ROTOR
Pump tube Niro - PURE
for Foodstuffs (PURE series)
Description:
The Lutz pumping station (Niro) PURE is suitable for aqueous and fatty foods. Depending on the application, various motors are available that you can combine with the pumping station at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pumping unit equipped with Lutz Original handwheel
Also for food containing alcohol, cosmetics and pharmaceutical products as well as flammable cleaning agents
Features & advantages
Physiologically safe design
High surface quality
Food-safe connections
No lubricants and therefore no contamination of the pumped liquid by lubricants
Approved according to FDA and Regulation (EC) 1935/2004
Niro
Rotor
Pump tube Niro
Suitable for B2 Vario and B2 Battery
Description:
The Lutz pumping unit (Niro) is suitable for low-viscosity, oil-based lubricants, cold cleaners and plasticisers. With the appropriate motor, it is suitable for medium to large filling quantities. Depending on requirements, the pumping station can be operated with the B2 Vario electric motor or the B2 Battery version.
Examples of media: Lubricants (oil-based), cold cleaners, plasticisers
For dispensing small quantities from hobbocks, canisters and drums
Suitable for motor B2 Vario and B2 Battery
Features & advantages
No lubricants and therefore no contamination of the pumped medium
Optimised drum emptying
Maintenance without special tools
Universally resistant shaft bearing made of ETFE/PTFE
Sealless design (DL) conditionally dry-running safe
Your contact person
Lutz Pumpen | Contact
Do you have questions about drum pumps, container emptying, double diaphragm pumps, flow measurement or centrifugal pumps?
Our team of experts will be happy to assist you. Please send us an enquiry or call us directly.
+49 9342 879 - 260
anfrage@lutz-pumpen.de
