Pump tube PP for Complete drainage
Skip image gallery
HC Wave
Impeller
*Illustration may differ from the actual product
Available, delivery time: 4 days
Product number:
0103-040
Product information "Pump tube PP for Complete drainage"
Description:
The Lutz pumping station (PP) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various motors are available that you can combine with the pumping station at any time. This gives you flexibility at all times and saves important resources.
- Also available in special immersion depths from 200 - 2500 mm
- Pumping unit equipped with Lutz Original handwheel
- Suitable for emptying drums of oils such as rapeseed oil and vegetable oil
Features & advantages
- Optionally with electric or compressed air drive
- No lubricants and therefore no contamination of the pumped liquid by lubricants
- Optimised drum emptying with a residual quantity of approx. 0.1 litre
- No leaks if the pumping station is tilted or moved
- Maximum product utilisation with reduced barrel cleaning and disposal costs
- Sealing module of the mechanical seal pump (GLRD) can be replaced
| Bearings (Material): | Charcoal |
|---|---|
| Delivery head (up to max. m wc)*.: | 15 |
| Density (up to kg/dm³): | 2,0 |
| Drive shaft (Material): | HC-22 (2.4602) |
| Flow rate (up to max. l/min)*.: | 69 |
| Immersion depth (mm): | 700 |
| Immersion tube diameter (max. mm): | 50 |
| Impeller (Material): | PP (polypropylene) |
| Liquid temperature (max °C): | 50 |
| Mechanical seal (Material): | Carbon, ceramic, FPM, HC-4 (2.4610) |
| Pump tube material (Material): | PP (polypropylene) |
| Static seal (Material): | FPM (fluororubber) |
| Thread (inch) outside: | 1 1/4" |
| Type: | RE PP 41-L GLRD HC |
| Type of impeller / Drive type: | Impeller (radial impeller) |
| Type of seal: | Mechanical seal: (GLRD) |
| Viscosity (up to max. mPas)*.: | 1000 |
Laufrad oder Rotor?
In der Praxis zeigen sich 2 typische Einsatzarten:
Anforderung 1:
Überwinden von langen Schlauchlängen, erhöhte Viskosität und Dichte des Fördermediums, und die damit verbundene Anforderung von größeren Förderhöhen erfordern den Einsatz des Laufrades.
Lösung: Laufrad (L) = Radialrad
Anforderung 2:
Freier Auslauf und keine wesentlichen Druckverluste, aber verbunden mit dem Wunsch nach großer Fördermenge.
Lösung: Rotor (R) = Axialrad
Skip product gallery
Accessory Items
HC Wave
Impeller
Pump tube PP for Complete drainage
for low-viscosity acids
Description:
The Lutz pumping station (PP) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various motors are available that you can combine with the pumping station at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pumping unit equipped with Lutz Original handwheel
Suitable for emptying drums of oils such as rapeseed oil and vegetable oil
Features & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped liquid by lubricants
Optimised drum emptying with a residual quantity of approx. 0.1 litre
No leaks if the pumping station is tilted or moved
Maximum product utilisation with reduced barrel cleaning and disposal costs
Sealing module of the mechanical seal pump (GLRD) can be replaced
Skip product gallery
Accessory Items
HC Wave
Impeller
TR3 Flow meter (PP)
for low-viscosity acids
Description:
Easy to operate, compact design and quick to install on all drum and container pumps: The Lutz TR3 flow meter in PP or PVDF. A handy meter that you can "count on" in any situation. The symmetrical measuring chamber can be used for all flow directions and measures low-viscosity, non-flammable media precisely, quickly and, above all, efficiently.
PP for neutral and aggressive media
Examples of media: glycol, ferric chloride, hydrochloric acid, phosphoric acid, etc.
Two 1.5 V batteries (AAA) replaceable
Features & advantages
Measurement according to the turbine wheel principle
Displays the partial and total quantity
Variable display orientation
Mobile on a drum pump or with nozzle connection
Measuring range from 5 l/min - 120 l/min
Simple battery change
HC Wave
Impeller
Hose connection
for low-viscosity acids
Description:
The hose connection connects the delivery hoses to the pumping station, the double diaphragm pumps or the dispensing nozzle. When using a double diaphragm pump, a suitable reducing nipple must be used in addition to the hose connection
Special connections are available on request
Features & advantages
Nominal sizes: DN 13 / DN 19 / DN 25 / DN 32
Materials PP / PVDF / aluminium / stainless steel / HC
HC Wave
Impeller
FASSADAPTER
for low-viscosity acids
Description:
The drum adapter is for fastening the pump or pump unit in the drum opening. It prevents the pump from tipping over when the drum is empty.
Materials: PP / ST37 / steel, galvanised / PE
Features & advantages
Stabilisation of the pumping unit
External thread 2", 56 x 4 and 70 x6
HC Wave
Impeller
PVC spiral hose
for low-viscosity acids
Description:
The hose is suitable for aggressive and non-flammable liquids, but also for food liquids. It is made of PVC with an embedded and galvanised steel wire helix (smooth inside and outside).
Also available in special lengths on request
Nominal diameter: DN 19 / DN 25 / DN 32
Features & advantages
Pumped medium temperature: -5 to +65 °COperating pressure max. 4.5 - 5 bar
fulfils EU Regulation 10/2011 and 1935/2004.
HC Wave
Impeller
Dispensing nozzle PP
for low-viscosity acids
Description:
For filling and decanting neutral and aggressive liquids. The body and the valve plug of the dispensing nozzle are made of polypropylene (PP) and are equipped with a protective bracket and two outlet nozzles ( Ø 23 mm and Ø 12mm).
Connection: external thread G 1 1/4"
Features & advantages
Simple adjustment of the volume flow
Safe filling or decanting of the respective liquid
Easy to operate
HC Wave
Impeller
IBC traverse
for low-viscosity acids
Description:
The IBC lifting beam is used to safely remove and install the pumping units or the double diaphragm pump.
Suitable for drum pumps, B70 progressive cavity pumps and diaphragm pumps
Includes transport straps for lifting vehicles and tensioning hooks for fixing to the container
Features & advantages
Compatible with all standard IBC containers
Material: stainless steel
Clamping hook: galvanised steel
for drum pumps / B70 version, guide sleeve with Ø 55 mm made of plastic
HC Wave
Impeller
Hose set alkalis + acids
for low-viscosity acids
Description:
The hose set is suitable for aggressive and non-flammable liquids, but also for food liquids. The hose is made of PVC with an embedded and galvanised steel wire helix (smooth inside and outside). The set is used for connection to the pumping station or nozzle.
Also available in special lengths on request
Features & advantages
Nominal diameter DN 19 (3/4")
PP hose connection
Pre-assembled hose connections and hose clamps