Drum pump accessories
DN 19 (3/4")
Hose clamp DN 19 (3/4")
Description:
The hose clamp is made of stainless steel and is suitable for attaching delivery hoses to the pump outlet or accessories.
The nominal diameter of the clamp corresponds to DN19 (3/4")
Features & advantages
Clamping range from 28.0 - 31.0 mm
PP
DN 19 (3/4")
Hose connection
with 1 1/4" female thread connection
Description:
The hose connection connects the delivery hoses to the pumping station, the double diaphragm pumps or the dispensing nozzle. When using a double diaphragm pump, a suitable reducing nipple must be used in addition to the hose connection
Special connections are available on request
Features & advantages
Nominal sizes: DN 13 / DN 19 / DN 25 / DN 32
Materials PP / PVDF / aluminium / stainless steel / HC
PP
Foot strainer
Suitable for pumping station PP or suction pipe
Description:
The foot strainer can be used for PP, PVDF, aluminium and stainless steel pumping units. By attaching the strainer to the pump foot, coarse impurities can be kept away from important components such as the drive (rotor, impeller).
For attaching to the pump base and the suction pipe with Ø 41 mm
Features & advantages
Prevents contamination in the pumping station by filtering it out
Outer pipe diameter 55 mm
Mesh size 20 x 2 mm
Carrying handle
for motor MA II and ME II
Description:
The support bracket makes it easier to lift the pump out of or immerse it in the drums or containers. With an explosion-protected drive motor, the explosion-protection switch is attached to the support bracket
for motor MA II / ME II / B4/GT / three-phase motor / single-phase motor / three-phase motor for reduction gearboxes
Features & advantages
No heavy lifting necessary
Makes it easier to lift out or immerse the motor either with or without pump unit
Dispensing nozzle PP
for acids and alkalis
Description:
For filling and decanting neutral and aggressive liquids. The body and the valve plug of the dispensing nozzle are made of polypropylene (PP) and are equipped with a protective bracket and two outlet nozzles ( Ø 23 mm and Ø 12mm).
Connection: external thread G 1 1/4"
Features & advantages
Simple adjustment of the volume flow
Safe filling or decanting of the respective liquid
Easy to operate
PP
Barrel adapter PP
Suitable for pump types PP-DL with an immersion pipe diameter of 32 mm
Description:
The drum adapter stabilises the pumping unit or pump in the drum or container opening and prevents the pump from tipping over when the drum is empty.
Detailed information on the various container openings is available on request
for the B2 pumping unit
Features & advantages
Stabilisation of the drum pump
Protection against the pumping unit falling out
Explosion protection
Dispensing nozzle Niro
For flammable and highly flammable liquids
Description:
For filling and transferring liquids in the food and pharmaceutical industries as well as flammable and highly flammable liquids. The body and valve plug of the dispensing nozzle are made of stainless steel (1.4571) and are equipped with a protective bracket and a swivel coupling.
EPDM seal available on request at an extra charge
Connection: external thread G 1 1/4"
Features & advantages
For pumping in potentially explosive environments
Simple adjustment of the volume flow
Easy to operate
Safe filling or transferring of the respective liquid
Rotary coupling ensures tightness at high pressure
Hose connection RE PP
with 1 1/4" female thread connection
Description:
The hose connection connects the delivery hoses to the pumping station, the double diaphragm pumps or the dispensing nozzle. When using a double diaphragm pump, a suitable reducing nipple must be used in addition to the hose connection
Special connections are available on request
Features & advantages
Nominal diameter: DN 19 (3/4")
Material made of PP grey
NW 150mm
Container lid
Nominal diameter 150
Description:
The container lid is used to hold a drum adapter and is suitable for the IBC container
Nominal width of 150 and 225
Properties & advantages
Material: PE
Thread: 2" IG
Explosion protection
Wechselstrom
CEAG
Ex-plug
for ME II motor and for B70V-SR (Ex)
Description:
The CEE round plugs are suitable for three-phase motors (three-phase current) and electric motors (alternating current) and are used in potentially explosive areas or environments.
Splash-proof
Features & benefits
Certification: EEx de IIC T6
Protection class: IP 65
Rotary (3-pole) or alternating current (5-pole)
FPM/FPM
DN 19 (3/4")
PP hose connection, swivelling
for internal thread 1 1/4"
Description:
The hose connection connects the delivery hoses to the dispensing nozzle PP.
Nominal sizes: DN 19 / DN 25 / DN32
Features & advantages
Connection to 1 1/4" internal thread
PP material
Seals FPM / FPM, FEP/FPM, EPDM
Explosion protection
DN 19 (3/4")
2 m
Solvent hose set (NBR)
for highly flammable hydrocarbons
Description:
The hose set is suitable for a wide range of commercially available solvents. The hose is electrically conductive so that it can also be used in potentially explosive environments. The set is used to connect to the pumping station or dispensing nozzle.
Also available in special lengths on request
Electrically conductive
Features & advantages
Hose connection: 1 1/4" female thread
Nominal diameter: DN 19 (3/4")
Pre-assembled hose connections
Complies with EU regulations 10/2011 and 1935/2004
Explosion protection
Stainless steel
Clamping device
for pumping stations PP, PVDF, aluminium, stainless steel and HC
Description:
The clamping device is for fastening the drum pump in open and thick-walled drums and containers
Suitable for a wide range of pumping station diameters
Features & advantages
Stainless steel material
Suspension device
for pump Lutz B2 Vario
Description:
The suspension device is used to safely store the B2 Vario drum and laboratory pump. This protects the pumps and increases their utility value at the same time.
Precisely adapted to the B2 Vario drum pump
Features & advantages
Increases the utility value
Protection against the pumping unit or drum pump falling down
Food
Explosion protection
Seal FPM
Dispensing nozzle Niro in PURE design
For flammable and highly flammable liquids
Description:
For filling and transferring liquids in the food and pharmaceutical industries as well as flammable and highly flammable liquids. The body and valve plug of the dispensing nozzle are made of stainless steel (1.4571) and are equipped with a protective bracket and a swivel coupling.
Connection: Tri-Clamp DN32
Features & benefits
For pumping in potentially explosive environments
Simple adjustment of the volume flow
Easy to operate
Safe filling or transferring of the respective liquid
Rotary coupling ensures tightness at high pressure
Explosion protection
Alternating current
CEAG
Ex socket outlet
for ME II motor and for B70V-SR (Ex)
Description:
The CEE socket outlets are suitable for three-phase motors (three-phase current) and electric motors (alternating current) and are used in potentially explosive areas or environments.
Splash-proof
Features & benefits
Certification: EEx de IIC T6
Protection class: IP 65
Rotary (3-pole) or alternating current (5-pole)
Food
G 2"
Barrel adapter food
for drum pumps and pumping stations in the food & pharmaceutical sector
Description:
The FDA-compliant PVDF drum adapter ensures that the pump or pump unit is securely fastened in the drum opening. It prevents the pump from tipping over or slipping in the empty drum, which ensures smooth operation.
Material: PVDF
FDA-compliant
Properties & advantages
Stabilisation of the pumping station
Suitable for pumping stations with a 41 Ø
External thread 2"
PVDF
1,5 m
Set accessories B2 PVDF version
Description:
The B2 PVDF set accessory is suitable for low-viscosity, aqueous to slightly viscous media. The set is suitable for the pump B2 Vario & B2 Battery in the PVDF version.
Also available in special lengths on request
10 -14 kg
Balancer
with infinitely variable load adjustment
Description:
The balancer makes it easier to insert and move the pump in the container and has an infinitely variable load adjustment. It is equipped with a special fall protection in the event of a spring breakage and offers maximum safety for long-term applications.
For drum pumps and progressing cavity pumps
Features & advantages
Load capacity from 10 - 30 kg
Cable pull up to 2 m
DN 25 (1")
max 5 bar
1 m
PVC spiral hose
For aggressive and non-flammable liquids
Description:
The hose is suitable for aggressive and non-flammable liquids, but also for food liquids. It is made of PVC with an embedded and galvanised steel wire helix (smooth inside and outside).
Also available in special lengths on request
Nominal diameter: DN 19 / DN 25 / DN 32
Properties & advantages
Operating pressure max. 4.5 - 5 bar
Complies with EU Regulation 10/2011 and 1935/2004.
Stainless steel
Emission protection barrel adapter
for pump diameter 41 mm
Description:
Prevents hazardous gases from escaping from the drum when using a drum pump. This protects the operator, the environment and the drive motor from hazardous gases. Two ventilation valves ensure pressure equalisation between the inside of the drum and the surrounding atmosphere.
Optionally with corresponding ventilation valve and container lid
Seals: FPM (alt. EPDM of FEP)
Special threads (Tri-Sure 2", BCS 56 x 4 AG, Mauser 2", BCS 70 x 6 AG, M 64 x 4 AG) are available on request
Features & advantages
Connection for vapour return line: G 3/8"
Screw-in thread: G 2" AG
Quick pressure equalisation through vent valves
Simple installation
Secure stability thanks to spring mechanism