Battery pump set - B2 Battery PP incl. counter
*Illustration may differ from the actual product
Available immediately, delivery time: Available from stock (approx. 5 working days)
Product information "Battery pump set - B2 Battery PP incl. counter"
Description:
The B2 Battery pump set is suitable for low-viscosity, aqueous to slightly viscous media. The set is suitable for dispensing small containers such as canisters or hobbocks. The Pump is flexible at all times and thus conserves important resources.
- Replaceable, powerful rechargeable battery with Li-Ion
- Battery life approx. 35 min at maximum speed
- 1 battery charge empties approx. 12 x 200 litre containers
Properties & advantages
- BLDC Motor with high efficiency of up to 70%
- Infinitely variable
- Long battery life
- Automatic switch-off in case of overload
- Sophisticated quick-release fastener
| Bearings (Material): | ETFE / PTFE |
|---|---|
| Capacity (Ah): | 4 |
| Delivery head (up to max. m wc)*.: | 12 |
| Density (up to kg/dm³): | 1,6 |
| Drive shaft (Material): | Hastelloy C (2.4610) |
| Drive type: | Battery |
| Flow rate (up to max. g/min)*.: | 17.44 |
| Flow rate with nozzle (up to max. g/min)*.: | 5.81 |
| Hose length (inch): | 1500 |
| Immersion depth (inch): | from 39" (1000 mm) |
| Immersion tube diameter (max. inch): | 32 |
| Impeller (Material): | PP (polypropylene) |
| Liquid temperature (max. °C): | 50 (122,0 °F) |
| Mechanical seal (Material): | No Seals in contact with the medium |
| Power (W): | 260 |
| Pump tube material (Material): | PP (polypropylene) |
| Static seal (Material): | No Seals in contact with the medium |
| Suitable fluids: | Ammonia water, Battery acid, Glycol, Hydrochloric acid, Hydrogen peroxide, Phosphoric acid, Photo developer, Photofixer |
| Thread (inch) outside: | 1" |
| Type of impeller / Drive type: | Radial-flow impeller |
| Type of seal: | Sealless (SL) |
| Viscosity (up to max. mPas)*.: | 400 |
| Voltage (V): | 21,6 |
Lutz does not currently offer any battery-powered drum pumps with ATEX approval for hazardous areas. Only fully explosion-proof drive systems may be used for flammable media such as ethanol.
The reason for this is safety requirements. Batteries are potential ignition sources because they can generate heat or sparks in the event of a fault. In hazardous areas, however, the entire system consisting of the motor, energy source, and electrical wiring must be ATEX-compliant. Individual protected components are not sufficient.
As soon as the application is located in a potentially explosive area, the use of an explosion-proof drum pump is mandatory. This applies regardless of the quantity being pumped or whether the application is stationary or takes place at different locations.
For such applications, we recommend using a drum pump with:
- ATEX-certified electric motor or compressed air motor
- Suitable grounding to prevent electrostatic charging
- Media-resistant materials for ethanol
If a mobile solution is to be implemented, it can be checked whether the power supply can be positioned outside the Ex zone or whether a compressed air-powered version is appropriate.
The specific design should always be based on the zone classification, operational safety requirements, and the desired delivery rate.
Similar Items
Accessory Items
