Diaphragm pumps mixing system
*Illustration may differ from the actual product
Delivery time on request
Product number:
5000-140
Product information "Diaphragm pumps mixing system"
Description:
For liquids that need to be mixed before processing and then pumped or that also contain small solids, the new Diaphragm pump mixing system with an integrated compressed air-driven double Diaphragm pump is the perfect solution. The mixing and pumping process takes place via a suction and mixing pipe and a 3-way valve. The pre-assembled system is ready for immediate use in just a few simple steps and is also suitable for potentially explosive liquids.
- Mixing and pumping integrated in one system
- Examples of media: Paints and varnishes, emulsions, dispersions, suspensions, water/oil mixtures, liquids with increased Viscosity and solids content
Properties & advantages
- Quick installation and time savings thanks to simple handling
- Compact design
- Base plate offers good stability on the container lid
- Easy to insert into the 2" bunghole of the container using a balancer or overhead crane
- No additional mixer required
| Certification: | ATEX Directive (ATEX Directive 2014/34/EU) |
|---|---|
| Check ball (Material): | PTFE (polytetrafluoroethylene) |
| Check valve seat (Material): | Stainless steel |
| Design/Equipment: | Bolted version |
| Diaphragms (Material): | PTFE (polytetrafluoroethylene) |
| Flow rate (up to max. g/min)*.: | 15.06 |
| Housing (Material): | Stainless Steel |
| Liquid temperature (max. °C): | 93 (199,4 °F) |
| Operating pressure (max. bar): | 8,2 |
| Seals (Material): | EPDM (ethylene propylene diene rubber), FPM (fluororubber), NBR (acrylonitrile butadiene rubber), PTFE (polytetrafluoroethylene) |
| Size (Inches): | 1/2" |
| Solids (max. ø mm): | 3,2 |
| Suction lift dry (in feet): | 4,3 |
| Type: | DMP 1/2" SST SS/PTFE |