Double diaphragm pump DMP model 1 1/2" plastic Explosion proof
Explosion protection
Plastic
PVDF
*Illustration may differ from the actual product
Product number:
5241-110
Product information "Double diaphragm pump DMP model 1 1/2" plastic Explosion proof"
Description:
The double diaphragm pump 1 1/2" PVDF explosion proof is suitable for Large-scale industry and plant feeding as well as for high Flow rates and higher Viscosities.
- Typical applications: Filter press, tank cleaning system, pigment dyes and resins
- Integrated silencer up to model size DMP 1"
- highly resistant TFM (PTFE) diaphragms (modified PTFE)
Properties & advantages
- High hydraulic power
- Maintenance-optimised design and easy installation
- Self-priming (even when dry)
- Absolutely oil-free
- Blockage-free operation
- Pumps explosion-proof in accordance with the ATEX directive (explosion protection)
| Air inlet (inch) inside: | 1/2" |
|---|---|
| Air pressure (max. bar): | 8 |
| Air pressure start-up (min. bar): | 2 |
| Centre block (material): | Polypropylene reinforced with carbon fibre (PP) |
| Check ball (Material): | PTFE (polytetrafluoroethylene) |
| Check valve seat (Material): | PVDF (polyvinylidene fluoride) |
| Connection: | Thread |
| Delivery head (up to max. m wc)*.: | 80 |
| Diaphragms (Material): | TPV (EPDM-PP) + TFM (PTFE) (EPDM/PP compound + modified polytetrafluoroethylene) |
| Displacement per chamber (in cm³): | 670 |
| Displacement per cycle (in cm³): | 1340 |
| Double diaphragm pumps (material): | Plastic |
| Explosion protection: | Yes |
| Flow rate (up to max. g/min)*.: | 97.74 |
| Housing (Material): | Polivinylidenfluorid kohlefaserverstärkt (PVDF) |
| Liquid temperature (max. °C): | 90 (194,0 °F) |
| Pressure joint (inch) inside: | 1 1/2" |
| Seals (Material): | PTFE (polytetrafluoroethylene) |
| Size (Inches): | 1 1/2" |
| Solids (max. ø mm): | 7 |
| Sound pressure level dB(A): | 80 |
| Suction head dry (up to max. mwc*): | 4,5 |
| Suction joint (inch) inside: | 1 1/2" |
| Viscosity (up to max. mPas)*.: | 30000 |
Similar Items
Explosion protection
Plastic
PVDF
Double diaphragm pump DMP model 1 1/2" PEE PURE
for plant feeders and Large-scale industry
Description:
The double diaphragm pump is suitable for the Foodstuffs and pharmaceutical sectors as well as large flow rates and higher Viscosities.
Typical applications: liquid food and luxury foods, active pharmaceutical ingredients and cosmetic products
Highly resistant PE material with low coefficient of friction
FDA-compliant
Properties & advantages
High hydraulic power
Maintenance-optimised design and easy installation
Self-priming (even when dry)
Ice-free air system
Blockage-free operation
Connections: suitable for foodstuffs
Explosion protection
Plastic
PVDF
Double diaphragm pump DMP model 1 1/2" metal
for plant feeders and Large-scale industry
Description:
The double diaphragm pump is suitable for Large-scale industry and system feeding as well as for large Flow rates and higher Viscosities.
Typical applications: Transfer from drums and tanks, transfer of corrosive solutions and chemicals
Integrated silencer up to model size DMP 1"
also available in the Pure version (5244-410)
Properties & advantages
High hydraulic power
Maintenance-optimised design and easy installation
Self-priming (even when dry)
Absolutely oil-free
Blockage-free operation
Pumps explosion-proof in accordance with the ATEX directive (explosion protection)
Accessory Items
Explosion protection
Plastic
PVDF
Pulsation dampener PD I D
for plant feeders and Large-scale industry
Description:
Pulsation dampeners are tanks filled with a gas cushion. A diaphragm separates the gas cushion from the system fluid. Pulsation dampers store and discharge part of the stroke volume in the stroke rhythm of the double diaphragm pump, whereby the gas cushion is compressed or decompressed accordingly. This makes the pulsating flow rate of the Pump almost uniform.
Adjustable air control
Material: PP / PVDF / stainless steel
Properties & advantages
Connection type on the medium side: 2" IG
Connection type on air side: 1/4" AG
Operating pressure (max. 10 bar)
Ensure almost uniform volume flow, which increases the accuracy of flow meters
Compensation of pressure surges (water hammer) protects installed fittings
Avoids pipe vibrations that cause material fatigue and pipe breakages
Explosion protection
Plastic
PVDF
Potential equalisation cable
for plant feeders and Large-scale industry
Description:
The potential equalisation cable is used for the electrically conductive connection between the Explosion proof Pump and Tank and has the function of earthing and potential equalisation.
2 m with fastening clip
Properties & advantages
Earthing and potential equalisation function
Explosion protection
Plastic
PVDF
Suction pipe
for plant feeders and Large-scale industry
Description:
The suction tube is required to be able to convey or suck in highly chemical media without the outer layer being attacked as with the immersion of a hose.
Material: PP
Properties & advantages
Outer tube diameter 41 mm
Pipe length from 1000 - 1200 mm
Connection: 1 1/4" AG
Explosion protection
Plastic
PVDF
Vibration damper set
for plant feeders and Large-scale industry
Description:
The vibration damper set ensures the damping of vibrations, shocks and impacts. The set consists of 4 vibration dampers including fastening material.
Thread M6 / M8 / M 12
Properties & advantages
M6 / M8 / M 12 thread standard in accordance with DIN 13-1
Explosion protection
Plastic
PVDF
Hose connection
for plant feeders and Large-scale industry
Description:
For connection of delivery hoses to the B70V-D Pump tube.
Nominal diameters: DN 25 / DN 32 / DN 38
Properties & advantages
Connection thread: 1 1/2"
Material: stainless steel
Explosion protection
Plastic
PVDF
IBC traverse
for plant feeders and Large-scale industry
Description:
The IBC traverse is used to safely remove and install the Pump tubes or the double diaphragm pump.
Suitable for Drum pumps, Eccentric screw pumps B70 and Diaphragm pumps
Includes transport straps for lifting vehicles and tensioning hooks for fixing to the container
Properties & advantages
Compatible with all standard IBC containers
Material: stainless steel
Clamping hook: galvanised steel
for Drum pumps / B70 Version: plastic guide sleeve with Ø 55 mm