Select a category
Unsere Produkte
Our complete range of accessories
Filter pressure reducer
for Lutz Compressed air motors and Diaphragm pumps DMP 1/4 "to 2"
Description:
Filter pressure reducer with pressure gauge for setting the operating pressure.
Inlet pressure max. 16 bar
Ambient temperature max. 60°C
Properties & advantages
Filter element 5 µm, Cellpor and 40 m, sintered bronze
Zinc die-cast and aluminium housing
Diaphragm and seals made of NBR
PP
DN 19 (3/4")
PP hose connection
with 1" internal thread connection
Description:
The hose connection connects the delivery hoses to the Pump tubes, the double diaphragm pumps or the dispensing nozzle. When using a double diaphragm pump, a suitable reducing nipple must be used in addition to the hose connection
Special connections are available on request
Properties & advantages
Nominal diameter (DN): DN 19
Material: PP
Foodstuffs
Explosion protection
DN 25 (1")
Universal chemical hose
for chemicals, food and hygiene products
Description:
The hose is suitable for pure chemicals, cosmetics, photographic chemicals, paints and adhesives, detergents and cleaning agents, hygiene products, as well as food and luxury foods. It is FDA and USP Class VI compliant. The Hose: is electrically conductive so that it can also be used in potentially explosive environments.
Also available in special lengths on request
Nominal diameter: DN 13 / DN 19 / DN 25 / DN 32 / DN 38 / DN 50
Properties & advantages
Operating pressure (max. 16 bar)
Colour coding: "blue/white/blue".
Complies with EU regulations 10/2011 and 1935/2004
Underpressure max 0.9 bar
DN 19 (3/4")
Hose clamp DN 19 (3/4")
Description:
The hose clamp is made of stainless steel and is suitable for attaching delivery hoses to the pump outlet or accessories.
The nominal diameter of the clamp corresponds to DN19 (3/4")
Properties & advantages
Clamping range from 28.0 - 31.0 mm
Explosion protection
Stainless steel
Foot strainer for Eccentric screw pumps
for the Eccentric screw pumps B70V
Description:
The foot strainer can be used for Eccentric screw pumps. By attaching the strainer to the pump foot, coarse impurities can be kept away from important components such as the drive.
For attaching to the pump base
Properties & advantages
Prevents contamination in the Pump tube by filtering it out
Material: stainless steel (1.4571)
PP
Foot strainer PP
Suitable for the laboratory pump B1/B2 Battery and Lutz B2 Vario
Description:
For attaching to the pump foot. This keeps coarse impurities away from the rotating parts, reducing wear and tear on the Pump.
Is plugged onto the pump foot
Properties & advantages
Protects important parts from contamination
Reduces wear on the Pump
PP
Foot strainer for Pump tubes Ø 41mm
Suitable for Pump tube PP or suction pipe
Description:
The foot strainer can be used for PP, PVDF, aluminium and stainless steel Pump tubes. By attaching the strainer to the pump foot, coarse impurities can be kept away from important components such as the drive (rotor, impeller).
For attaching to the pump base and the suction pipe with Ø 41 mm
Properties & advantages
Prevents contamination in the Pump tube by filtering it out
Outer pipe diameter 55 mm
Mesh size 20 x 2 mm
PP
DN 19 (3/4")
Hose connection
with 1 1/4" internal thread connection
Description:
The hose connection connects the delivery hoses to the Pump tubes, the double diaphragm pumps or the dispensing nozzle. When using a double diaphragm pump, a suitable reducing nipple must be used in addition to the hose connection
Special connections are available on request
Properties & advantages
Nominal diameters: DN 13 / DN 19 / DN 25 / DN 32
Material: PP / PVDF / aluminium / stainless steel / HC
Dispensing nozzle PP
for acids and alkalis
Description:
For filling and decanting neutral and aggressive liquids. The dispensing nozzle's housing and valve plug are made of polypropylene (PP). The dispensing nozzle is also equipped with a protective bracket and two outlet nozzles(Ø 23 mm and Ø 12 mm).
Connection: external thread G 1 1/4"
Properties & advantages
Simple adjustment of the volume flow
Safe filling or decanting of the respective liquid
Easy to operate
Explosion protection
Brass petrol nozzle
for solvents and highly flammable hydrocarbons
Description:
For dispensing and transferring solvents and neutral liquids. The housing: and the valve plug of the dispensing nozzle are made of brass and are equipped with a swivel coupling and a protective bracket.The nozzle is sealed using a PTFE seal.
Connection: external thread G 1 1/4"
Properties & advantages
Safe filling or decanting of the respective liquid
Easy to operate
Rotary coupling ensures tightness at high pressure
For pumping in potentially explosive environments
FPM/FPM
DN 19 (3/4")
Hose connection PVDF, rotatable
for internal thread 1 1/4"
Description:
The hose connector connects the delivery hoses to the PVDF dispensing nozzle.
Nominal diameters: DN 19 / DN 25 / DN32
Properties & advantages
Connection: 1 1/4" female thread
Material: PP
Seals FPM / FPM
Suspension device
for Pump Lutz B2 Vario
Description:
The suspension device is used to safely store the B2 Vario drum and laboratory pump. This protects the pumps and increases their utility value at the same time.
Precisely adapted to the Drum pump B2 Vario
Properties & advantages
Increases the utility value
Protection against the Pump tubes or Drum pump falling down
Relay module RM10
for the ST10, SL10, VA10, HC10, HDO 250, HDO 400, HDO 500 series
Description:
The relay module enables volume preselection with the corresponding connection cables.
Voltage: 220 - 230V
Properties & advantages
Frequency: 50 - 60 Hz
Labelling: II (2) G [Ex ib Gb] IIC
Suspension device
for Pump tubes with handwheel
Description:
The suspension device is used to store the Drum pumps and prevents them from falling over.
For Pump tubes with handwheel
Properties & advantages
Protects against falling over
Increases the utility value
Barrel adapter
for Drum pumps or Pump tubes PP, PVDF, aluminium and stainless steel
Description:
The drum adapter is for fastening the Pump or Pump tubes in the drum opening. It prevents the Pump from tipping over when the drum is empty.
Material: PP / ST37 / steel, galvanised / PE
Properties & advantages
Stabilisation of the Pump tube
External thread 2", 56 x 4 and 70 x6
Explosion protection
DN 19 (3/4")
2 m
Solvent hose set (NBR)
for highly flammable hydrocarbons
Description:
The hose set is suitable for a wide range of commercially available solvents. The hose is electrically conductive so that it can also be used in potentially explosive environments. The set is used for connection to the Pump tube or dispensing nozzle.
Also available in special lengths on request
Electrically conductive
Properties & advantages
Hose connection: 1 1/4" female thread
Nominal diameter: DN 19 (3/4")
Pre-assembled hose connections
Complies with EU regulations 10/2011 and 1935/2004
Aluminium nozzle
for mineral oils, heating oils and diesel
Description:
For transferring and filling mineral oils, heating oil and diesel. The housing: and the valve plug of the nozzle are made of aluminium and are equipped with a swivel joint and a protective bracket.The nozzle is sealed with the aid of an NBR seal.
Connection:: Female thread G 1"
Properties & advantages
Safe filling or decanting of the respective liquid
Easy to operate
Swivel joint ensures tightness at high pressure
Explosion protection
Dispensing nozzle Niro
For flammable and highly flammable liquids
Description:
For dispensing and transferring liquids in the Foodstuffs and Pharmaceutical Industry as well as flammable and highly flammable liquids. The housing and the valve plug of the dispensing nozzle are made of stainless steel (1.4571) and are equipped with a protective bracket and a swivel coupling.
EPDM seal is available on request at an extra charge
Connection: external thread G 1 1/4"
Properties & advantages
For pumping in potentially explosive environments
Simple adjustment of the volume flow
Easy to operate
Safe filling or transferring of the respective liquid
Rotary coupling ensures tightness at high pressure
Carrying handle
for motor MA II and ME II
Description:
The support bracket makes it easier to lift or immerse the Pump from the drums or containers. With an explosion-protected drive motor, the explosion-protection switch is attached to the support bracket
For motor MA II / ME II / B4/GT / Three-phase motor / Single-phase motor / Three-phase motor for reduction gears
Properties & advantages
No heavy lifting necessary
Makes it easier to lift out or immerse the Motor either with or without Pump tubes
Stainless steel
IBC traverse
for Drum pumps and eccentric screw pumps B70
Description:
The IBC traverse is used to safely remove and install the Pump tubes or the double diaphragm pump.
Suitable for Drum pumps, Eccentric screw pumps B70 and Diaphragm pumps
Includes transport straps for lifting vehicles and tensioning hooks for fixing to the container
Properties & advantages
Compatible with all standard IBC containers
Material: stainless steel
Clamping hook: galvanised steel
for Drum pumps / B70 Version: plastic guide sleeve with Ø 55 mm
Your contact person
Lutz-JESCO America Corp.
Do you have questions about dosing pumps, disinfection systems, chlorine dosing systems, system and process technology or measurement and control technology?
Our team of experts will be happy to assist you. Please send us an enquiry or call us directly.
+1 5854260990
infoljac@lutzjescoamerica.com
