Pump tube Niro
Explosion protection
Impeller
*Abbildung kann vom tatsächlichen Produkt abweichen
Available, delivery time: 4 days
Product number:
0150-003
Product information "Pump tube Niro"
Description:
The Lutz Pump tube (Niro) is suitable for low-viscosity, flammable and explosive liquids. Depending on the application, various Motors are available which you can combine with the Pump tube at any time. This gives you flexibility at all times and saves important resources.
- Also available in special immersion depths from 200 - 2500 mm
- Pump tubes equipped with Lutz Original handwheel
- Suitable for filling or transferring alternative fuels, oils and flammable liquids
Properties & advantages
- Optionally with electric or compressed air drive
- No lubricants and therefore no contamination of the pumped liquid by lubricants
- Approved in accordance with ATEX Directive 2014/34/EU, category 1/2
- Highly resistant high-grade carbon shaft bearing
- Maintenance without special tools
- Sealing modules of the mechanical seal-sealed (GLRD) or seal-less (DL) pump are interchangeable
| Bearings (Material): | Charcoal |
|---|---|
| Certification: | ATEX Directive (ATEX Directive 2014/34/EU) |
| Delivery head (up to max. m wc)*.: | 26 |
| Density (up to kg/dm³): | 1,9 |
| Drive shaft (Material): | Stainless steel (1.4571) |
| Explosion protection: | Yes |
| Flow rate (up to max. g/min)*.: | 32.49 |
| Immersion depth (inch): | from 19" (500 mm) |
| Immersion tube diameter (max. inch): | 41 |
| Impeller (Material): | ETFE (ethylene tetrafluoroethylene copolymer) |
| Liquid temperature (max. °C): | 100 (212,0 °F) |
| Mechanical seal (Material): | No Seals in contact with the medium |
| Pump tube material (Material): | Niro (stainless steel) |
| Static seal (Material): | No Seals in contact with the medium |
| Thread (inch) outside: | 1 1/4" |
| Type: | Niro 41-L-DL |
| Type of impeller / Drive type: | Radial-flow impeller |
| Type of seal: | Sealless (SL) |
| Viscosity (up to max. mPas)*.: | 750 |
Accessory Items
Explosion protection
Impeller
Solvent hose
for flammable liquids
Description:
The hose is suitable for a wide range of commercially available solvents. The hose is electrically conductive so that it can also be used in potentially explosive environments.
Also available in special lengths on request
Nominal diameter: DN 13 / DN 19 / DN 25 / DN 32 / DN 38 / DN 50
Electrically conductive
Properties & advantages
Operating pressure (max. 16 bar)
Colour coding: blue
fulfils EU regulations 10/2011 and 1935/2004
Underpressure max 0.9 bar
Explosion protection
Impeller
Potential equalisation cable
for flammable liquids
Description:
The potential equalisation cable is used for the electrically conductive connection between the Explosion proof Pump and Tank and has the function of earthing and potential equalisation.
2 m with fastening clip
Properties & advantages
Earthing and potential equalisation function
Explosion protection
Impeller
Solvent hose set (NBR)
for flammable liquids
Description:
The hose set is suitable for a wide range of commercially available solvents. The hose is electrically conductive so that it can also be used in potentially explosive environments. The set is used for connection to the Pump tube or dispensing nozzle.
Also available in special lengths on request
Electrically conductive
Properties & advantages
Hose connection: 1 1/4" female thread
Nominal diameter: DN 19 (3/4")
Pre-assembled hose connections
Complies with EU regulations 10/2011 and 1935/2004
Explosion protection
Impeller
Flow meters TS Type UN10 Ex
for flammable liquids
Description:
The first flowmeter with touchscreen display and backlighting impresses with its simple, needs-based display and operability, multilingual interface and compact design. Thanks to the rotating swash plate and a magnet, it enables precise measurement of the volume flow and measures solvents, acids, alkalis, highly flammable liquids, oils and neutral media precisely, quickly and, above all, efficiently. Optionally, the desired quantity can be preselected with the quantity preselection (relay module) so that the Pump or system switches off automatically after the selected quantity. This further simplifies and secures the operation of the systems.
Optional with volume preselection (relay module)
Media examples: Methanol, petrol, isopropanol, paraffin, formic acid, acetic acid, acetone, styrene, xylene, toluene, etc.
Mobile on a Drum pump or with dispensing nozzle connection or stationary in plant construction
Properties & advantages
Measurement according to the wobble disc principle
High measuring accuracy
Variable display position: variable
Touchscreen display with self-explanatory, multilingual user interface
Measuring range (min/min) from 10 l/min to 100 l/min
approved according to ATEX Directive 2014/34/EU, Category 2
Explosion protection
Impeller
Flow meters TS Type VA10 Ex
for flammable liquids
Description:
The first flowmeter with touchscreen display and backlighting impresses with its simple, needs-based display and operability, multilingual interface and compact design. Thanks to the rotating swash plate and a magnet, it enables precise measurement of the volume flow and measures solvents, acids, alkalis, highly flammable liquids, oils and neutral media precisely, quickly and, above all, efficiently. Optionally, the desired quantity can be preselected with the quantity preselection (relay module) so that the Pump or system switches off automatically after the selected quantity. This further simplifies and secures the operation of the systems.
Optional with volume preselection (relay module)
Media examples: Methanol, petrol, isopropanol, paraffin, formic acid, acetic acid, acetone, styrene, xylene, toluene, etc.
Mobile on a Drum pump or with dispensing nozzle connection or stationary in plant construction
Properties & advantages
Measurement according to the wobble disc principle
High measuring accuracy
Variable display position: variable
Touchscreen display with self-explanatory, multilingual user interface
Measuring range (min/min) from 10 l/min to 100 l/min
approved according to ATEX Directive 2014/34/EU, Category 2
Explosion protection
Impeller
Dispensing nozzle Niro
for flammable liquids
Description:
For dispensing and transferring liquids in the Foodstuffs and Pharmaceutical Industry as well as flammable and highly flammable liquids. The housing and the valve plug of the dispensing nozzle are made of stainless steel (1.4571) and are equipped with a protective bracket and a swivel coupling.
EPDM seal is available on request at an extra charge
Connection: external thread G 1 1/4"
Properties & advantages
For pumping in potentially explosive environments
Simple adjustment of the volume flow
Easy to operate
Safe filling or transferring of the respective liquid
Rotary coupling ensures tightness at high pressure
Explosion protection
Impeller
Universal chemical hose
for flammable liquids
Description:
The hose is suitable for pure chemicals, cosmetics, photographic chemicals, paints and adhesives, detergents and cleaning agents, hygiene products, as well as food and luxury foods. It is FDA and USP Class VI compliant. The Hose: is electrically conductive so that it can also be used in potentially explosive environments.
Also available in special lengths on request
Nominal diameter: DN 13 / DN 19 / DN 25 / DN 32 / DN 38 / DN 50
Properties & advantages
Operating pressure (max. 16 bar)
Colour coding: "blue/white/blue".
Complies with EU regulations 10/2011 and 1935/2004
Underpressure max 0.9 bar
Explosion protection
Impeller
Barrel adapter
for flammable liquids
Description:
The drum adapter is for fastening the Pump or Pump tubes in the drum opening. It prevents the Pump from tipping over when the drum is empty.
Material: PP / ST37 / steel, galvanised / PE
Properties & advantages
Stabilisation of the Pump tube
External thread 2", 56 x 4 and 70 x6
Explosion protection
Impeller
Hose integration
for flammable liquids
Description:
The hose connection ensures a good conductive transition between the hose and Pump tubes. The use of conductive hoses is mandatory in potentially explosive atmospheres. The ohmic resistance between the fittings must be less than106 ohms.
For Drum and container pumps
Properties & advantages
Material: stainless steel (1.4571)
for mineral oil hoses DN 19 / DN 25 / DN 32
Explosion protection
Impeller
IBC traverse
for flammable liquids
Description:
The IBC traverse is used to safely remove and install the Pump tubes or the double diaphragm pump.
Suitable for Drum pumps, Eccentric screw pumps B70 and Diaphragm pumps
Includes transport straps for lifting vehicles and tensioning hooks for fixing to the container
Properties & advantages
Compatible with all standard IBC containers
Material: stainless steel
Clamping hook: galvanised steel
for Drum pumps / B70 Version: plastic guide sleeve with Ø 55 mm
Explosion protection
Impeller
Hose set for potentially explosive media
for flammable liquids
Description:
The hose set is suitable for pure chemicals and explosive liquids. The hose is electrically conductive so that it can also be used in potentially explosive environments. The set is used for connection to the Pump tube or dispensing nozzle.
Also available in special lengths on request
Electrically conductive
Properties & advantages
Hose connection: 1 1/4" female thread
Nominal diameter: DN 19 (3/4")
Pre-assembled hose connections
Complies with EU regulations 10/2011 and 1935/2004
Explosion protection
Impeller
Flow meters TS Type LM10 Ex
for flammable liquids
Description:
The first flow meter with touchscreen display and backlighting impresses with its simple, needs-based display and operability, multilingual interface and compact design. Thanks to the rotating swash plate and a magnet, it enables accurate measurement of the volume flow and measures solvents and highly flammable liquids, oils and neutral media precisely, quickly and, above all, efficiently. Optionally, the desired quantity can be preselected with the quantity preselection (relay module) so that the Pump or the system switches off automatically after the selected quantity. This further simplifies and secures the operation of the systems.
Optional with volume preselection (relay module)
Media examples: Methanol, petrol, isopropanol, paraffin, formic acid, acetic acid, acetone, styrene, xylene, toluene, etc.
Mobile on a Drum pump or with dispensing nozzle connection or stationary in plant construction
Properties & advantages
Measurement according to the wobble disc principle
High measuring accuracy
Variable display position: variable
Touchscreen display with self-explanatory, multilingual user interface
Measuring range (min/min) from 10 l/min to 100 l/min
approved according to ATEX Directive 2014/34/EU, Category 2
Explosion protection
Impeller
Foot strainer for Pump tubes Ø 41mm
for flammable liquids
Description:
The foot strainer can be used for PP, PVDF, aluminium and stainless steel Pump tubes. By attaching the strainer to the pump foot, coarse impurities can be kept away from important components such as the drive (rotor, impeller).
For attaching to the pump base and the suction pipe with Ø 41 mm
Properties & advantages
Prevents contamination in the Pump tube by filtering it out
Outer pipe diameter 55 mm
Mesh size 20 x 2 mm
Explosion protection
Impeller
Brass petrol nozzle
for flammable liquids
Description:
For dispensing and transferring solvents and neutral liquids. The housing: and the valve plug of the dispensing nozzle are made of brass and are equipped with a swivel coupling and a protective bracket.The nozzle is sealed using a PTFE seal.
Connection: external thread G 1 1/4"
Properties & advantages
Safe filling or decanting of the respective liquid
Easy to operate
Rotary coupling ensures tightness at high pressure
For pumping in potentially explosive environments
Explosion protection
Impeller
Hose connection
for flammable liquids
Description:
The hose connection connects the delivery hoses to the Pump tubes, the double diaphragm pumps or the dispensing nozzle. When using a double diaphragm pump, a suitable reducing nipple must be used in addition to the hose connection
Special connections are available on request
Properties & advantages
Nominal diameters: DN 13 / DN 19 / DN 25 / DN 32
Material: PP / PVDF / aluminium / stainless steel / HC
Similar Items
Explosion protection
Impeller
Pump tube Niro
for flammable liquids
Description:
The Lutz Pump tube (Niro) is suitable for low-viscosity, flammable and explosive liquids. Depending on the application, various Motors are available that you can combine with the Pump tube at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pump tubes equipped with Lutz Original handwheel
Suitable for filling or transferring alternative fuels, oils and flammable liquids
Properties & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped liquid by lubricants
Approved in accordance with ATEX Directive 2014/34/EU, category 1/2
Highly resistant high-grade carbon shaft bearing
Maintenance without special tools
Sealing modules of the mechanical seal-sealed (GLRD) or seal-less (DL) pump are interchangeable