Industries
Pump tubes industries
Stainless steel shaft
Impeller
Pump tube aluminium
for mineral oils
Description:
The Lutz Pump tube (aluminium) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various Motors are available, which you can combine with the Pump tube at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pump tubes equipped with Lutz Original handwheel
Suitable for filling or transferring alternative fuels
Properties & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped medium by lubricants
Optimised drum emptying
Universally resistant ETFE shaft bearing
Maintenance without special tools
Seal modules of the mechanical seal-sealed (GLRD) or seal-less (DL) Pump are interchangeable
Stainless steel shaft
ROTOR
Pump tube aluminium
for mineral oils
Description:
The Lutz Pump tube (aluminium) is suitable for low-viscosity, aggressive and non-flammable media. Depending on the application, various Motors are available, which you can combine with the Pump tube at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pump tubes equipped with Lutz Original handwheel
Suitable for filling or transferring alternative fuels
Properties & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped medium by lubricants
Optimised drum emptying
Universally resistant ETFE shaft bearing
Maintenance without special tools
Seal modules of the mechanical seal-sealed (GLRD) or seal-less (DL) Pump are interchangeable
Explosion protection
ROTOR
Pump tube HC
for flammable chemicals
Description:
The Lutz Pump tube (HC) is suitable for low-viscosity, flammable and highly corrosive chemicals. Depending on the application, various Motors are available that you can combine with the Pump tube at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pump tubes equipped with Lutz original handwheel
Used in the areas of fire and disaster protection
Properties & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped medium by lubricants
Approved in accordance with ATEX Directive 2014/34/EU, category 1/2
Highly resistant carbon and ETFE shaft bearings
Maintenance without special tools
Sealing modules of the sealless (DL) Pump can be replaced
Explosion protection
Impeller
Pump tube HC
for flammable chemicals
Description:
The Lutz Pump tube (HC) is suitable for low-viscosity, flammable and highly corrosive chemicals. Depending on the application, various Motors are available that you can combine with the Pump tube at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pump tubes equipped with Lutz original handwheel
Used in the areas of fire and disaster protection
Properties & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped medium by lubricants
Approved in accordance with ATEX Directive 2014/34/EU, category 1/2
Highly resistant carbon and ETFE shaft bearings
Maintenance without special tools
Sealing modules of the sealless (DL) Pump can be replaced
Explosion protection
Impeller
Pump tube Niro
for flammable liquids
Description:
The Lutz Pump tube (Niro) is suitable for low-viscosity, flammable and explosive liquids. Depending on the application, various Motors are available which you can combine with the Pump tube at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pump tubes equipped with Lutz Original handwheel
Suitable for filling or transferring alternative fuels, oils and flammable liquids
Properties & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped liquid by lubricants
Approved in accordance with ATEX Directive 2014/34/EU, category 1/2
Highly resistant high-grade carbon shaft bearing
Maintenance without special tools
Sealing modules of the mechanical seal-sealed (GLRD) or seal-less (DL) pump are interchangeable
Explosion protection
ROTOR
Pump tube Niro
for flammable liquids
Description:
The Lutz Pump tube (Niro) is suitable for low-viscosity, flammable and explosive liquids. Depending on the application, various Motors are available that you can combine with the Pump tube at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pump tubes equipped with Lutz Original handwheel
Suitable for filling or transferring alternative fuels, oils and flammable liquids
Properties & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped liquid by lubricants
Approved in accordance with ATEX Directive 2014/34/EU, category 1/2
Highly resistant high-grade carbon shaft bearing
Maintenance without special tools
Sealing modules of the mechanical seal-sealed (GLRD) or seal-less (DL) pump are interchangeable
Niro
ROTOR
Pump tube Niro
Fits: B2 Vario and B2 Battery
Description:
The Lutz Pump tube (Niro) is suitable for low-viscosity, oil-based lubricants, cold cleaners and plasticisers. With the right motor, it is suitable for medium to large filling quantities. Depending on requirements, the Pump tube can be operated with the B2 Vario electric motor or the B2 Battery version.
Examples of media: Lubricants (oil-based), cold cleaners, plasticisers
For dispensing small quantities from hobbocks, canisters and drums
fits: Motor B2 Vario and B2 Battery
Properties & advantages
No lubricants and therefore no contamination of the pumped medium
Optimised drum emptying
Maintenance without special tools
Universally resistant shaft bearing made of ETFE/PTFE
Sealless version (DL) conditionally dry-running safe
Explosion protection
Impeller
Pump tube Niro for Complete drainage
for flammable liquids
Description:
The Lutz Pump tube for Complete drainage (stainless steel) is suitable for low-viscosity, flammable and explosive liquids. Depending on the application, various Motors are available that you can combine with the Pump tube at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pump tubes equipped with Lutz Original handwheel
Suitable for emptying drums of alternative fuels, oils and flammable liquids
Properties & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped liquid by lubricants
Optimised drum emptying with a residual volume of approx. 0.1 litre
no leaks if the Pump tube is tilted or moved
Maximum product utilisation with reduced drum cleaning and disposal costs
sealing module of the mechanical seal (GLRD) pump can be replaced
Explosion protection
ROTOR
Pump tube Niro for mixing and pumping
for flammable liquids
Description:
The Lutz Pump tube (stainless steel) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various Motors are available, which you can combine with the Pump tube at any time. This gives you flexibility at all times and conserves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pump tubes equipped with Lutz Original handwheel
Suitable for mixing and pumping alternative fuels, oils and flammable liquids
Properties & advantages
Also available with Tri-Clamp connection
Optionally with electric or compressed air drive
Two functions (Mixing and pumping) in one device
No leaks when the Pump tube is tilted or moved
high mixing and delivery capacity for thorough homogenisation
Switching between the Mixing and pumping functions takes place without interrupting ongoing operation, which is made possible by a small lever on the handwheel
Stainless steel shaft
Impeller
Pump tube PP
for low-viscosity alkaline solutions
Description:
The Lutz Pump tube (PP) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various Motors are available, which you can combine with the Pump tube at any time. This gives you flexibility at all times and conserves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pump tubes equipped with Lutz Original handwheel
Suitable for filling or decanting oils such as rapeseed oil and vegetable oil
Properties & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped medium by lubricants
Optimised drum emptying
Universally resistant PTFE shaft bearing
Maintenance without special tools
Seal modules of the mechanical seal-sealed (GLRD) or seal-less (DL) Pump are interchangeable
HC Wave
Impeller
Pump tube PP
for low-viscosity acids
Description:
The Lutz Pump tube (PP) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various Motors are available, which you can combine with the Pump tube at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pump tubes equipped with Lutz Original handwheel
Suitable for filling or decanting oils such as rapeseed oil and vegetable oil
Properties & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped medium by lubricants
Optimised drum emptying
Universally resistant PTFE shaft bearing
Maintenance without special tools
Seal modules of the mechanical seal-sealed (GLRD) or seal-less (DL) Pump are interchangeable
HC Wave
ROTOR
Pump tube PP
for low-viscosity acids
Description:
The Lutz Pump tube (PP) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various Motors are available, which you can combine with the Pump tube at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pump tubes equipped with Lutz Original handwheel
Suitable for filling or decanting oils such as rapeseed oil and vegetable oil
Properties & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped medium by lubricants
Optimised drum emptying
Universally resistant PTFE shaft bearing
Maintenance without special tools
Seal modules of the mechanical seal-sealed (GLRD) or seal-less (DL) Pump are interchangeable
Stainless steel shaft
ROTOR
Pump tube PP
for low-viscosity alkaline solutions
Description:
The Lutz Pump tube (PP) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various Motors are available, which you can combine with the Pump tube at any time. This gives you flexibility at all times and conserves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pump tubes equipped with Lutz Original handwheel
Suitable for filling or decanting oils such as rapeseed oil and vegetable oil
Properties & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped medium by lubricants
Optimised drum emptying
Universally resistant PTFE shaft bearing
Maintenance without special tools
Seal modules of the mechanical seal-sealed (GLRD) or seal-less (DL) Pump are interchangeable
HC Wave
ROTOR
Pump tube PVDF
for concentrated acids and alkalis
Description:
The Lutz Pump tube (PVDF) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various Motors are available, which you can combine with the Pump tube at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pump tubes equipped with Lutz original handwheel
Properties & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped liquid by lubricants
Optimised drum emptying
Universally resistant PTFE shaft bearing
Maintenance without special tools
Seal modules of the mechanical seal-sealed (GLRD) or seal-less (DL) Pump are interchangeable
HC Wave
Impeller
Pump tube PVDF
for concentrated acids and alkalis
Description:
The Lutz Pump tube (PVDF) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various Motors are available, which you can combine with the Pump tube at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pump tubes equipped with Lutz original handwheel
Properties & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped liquid by lubricants
Optimised drum emptying
Universally resistant PTFE shaft bearing
Maintenance without special tools
Seal modules of the mechanical seal-sealed (GLRD) or seal-less (DL) Pump are interchangeable