Pump tube aluminium
Stainless steel shaft
ROTOR
*Abbildung kann vom tatsächlichen Produkt abweichen
Product number:
0132-300
Product information "Pump tube aluminium"
Description:
The Lutz Pump tube (aluminium) is suitable for low-viscosity, aggressive and non-flammable media. Depending on the application, various Motors are available, which you can combine with the Pump tube at any time. This gives you flexibility at all times and saves important resources.
- Also available in special immersion depths from 200 - 2500 mm
- Pump tubes equipped with Lutz Original handwheel
- Suitable for filling or transferring alternative fuels
Properties & advantages
- Optionally with electric or compressed air drive
- No lubricants and therefore no contamination of the pumped medium by lubricants
- Optimised drum emptying
- Universally resistant ETFE shaft bearing
- Maintenance without special tools
- Seal modules of the mechanical seal-sealed (GLRD) or seal-less (DL) Pump are interchangeable
| Bearings (Material): | ETFE |
|---|---|
| Delivery head (up to max. m wc)*.: | 12 |
| Density (up to kg/dm³): | 1,4 |
| Drive shaft (Material): | Stainless steel (1.4571) |
| Flow rate (up to max. g/min)*.: | 44.91 |
| Immersion depth (inch): | from 19" (500 mm) |
| Immersion tube diameter (max. inch): | 41 |
| Impeller (Material): | ETFE (ethylene tetrafluoroethylene copolymer) |
| Liquid temperature (max. °C): | 100 (212,0 °F) |
| Mechanical seal (Material): | No Seals in contact with the medium |
| Pump tube material (Material): | Alu (aluminium) |
| Static seal (Material): | No Seals in contact with the medium |
| Thread (inch) outside: | 1 1/4" |
| Type: | Aluminium 41-R-DL |
| Type of impeller / Drive type: | Axial-flow rotor |
| Type of seal: | Sealless (SL) |
| Viscosity (up to max. mPas)*.: | 350 |
Similar Items
Stainless steel shaft
ROTOR
Pump tube aluminium
for mineral oils
Description:
The Lutz Pump tube (aluminium) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various Motors are available, which you can combine with the Pump tube at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pump tubes equipped with Lutz Original handwheel
Suitable for filling or transferring alternative fuels
Properties & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped medium by lubricants
Optimised drum emptying
Universally resistant ETFE shaft bearing
Maintenance without special tools
Seal modules of the mechanical seal-sealed (GLRD) or seal-less (DL) Pump are interchangeable
Accessory Items
Stainless steel shaft
ROTOR
Outlet bend
for mineral oils
Description:
The discharge elbow enables the direct transfer or filling of liquids into another tank. They are available in the materials PP, aluminium and stainless steel and are screwed onto the pump outlet.
Nominal diameters: DN 19 / DN 25
Properties & advantages
Enables liquids to be transferred quickly and directly
Union nut (1 1/4")
Stainless steel shaft
ROTOR
Mineral oil hose
for mineral oils
Description:
The hose is suitable for mineral oil products of all types and super up to 50% aromatics and methanol content. The inner rubber is made of NBR and the outer rubber is made of either CR (chloroprene) or NBR. The hose is electrically conductive so that it can also be used in potentially explosive environments.
Also available in special lengths on request
Nominal diameter: DN 13 / DN 19 / DN 25 / DN 32 / DN 38 / DN 50
Properties & advantages
Operating pressure (max. 16 bar)
Colour coding: "Yellow"
Stainless steel shaft
ROTOR
Aluminium nozzle
for mineral oils
Description:
For transferring and filling mineral oils, heating oil and diesel. The housing: and the valve plug of the nozzle are made of aluminium and are equipped with a swivel joint and a protective bracket.The nozzle is sealed with the aid of an NBR seal.
Connection:: Female thread G 1"
Properties & advantages
Safe filling or decanting of the respective liquid
Easy to operate
Swivel joint ensures tightness at high pressure
Stainless steel shaft
ROTOR
Hose set mineral oils
for mineral oils
Description:
The hose set is suitable for aggressive and non-flammable liquids, but also for food liquids. The hose set is made of PVC with an embedded and galvanised steel wire helix. The set is used for connection to the Pump tube or dispensing nozzle.
Also available in special lengths on request
Properties & advantages
Nominal diameter (DN) 25 (1")
Aluminium hose connection
Pre-assembled hose connections and hose clamps
Stainless steel shaft
ROTOR
Hose connection
for mineral oils
Description:
The hose connection connects the delivery hoses to the Pump tubes, the double diaphragm pumps or the dispensing nozzle. When using a double diaphragm pump, a suitable reducing nipple must be used in addition to the hose connection
Special connections are available on request
Properties & advantages
Nominal diameters: DN 13 / DN 19 / DN 25 / DN 32
Material: PP / PVDF / aluminium / stainless steel / HC
Stainless steel shaft
ROTOR
Barrel adapter
for mineral oils
Description:
The drum adapter is for fastening the Pump or Pump tubes in the drum opening. It prevents the Pump from tipping over when the drum is empty.
Material: PP / ST37 / steel, galvanised / PE
Properties & advantages
Stabilisation of the Pump tube
External thread 2", 56 x 4 and 70 x6
Stainless steel shaft
ROTOR
Suspension device
for mineral oils
Description:
The suspension device is used to store the Drum pumps and prevents them from falling over.
For Pump tubes with handwheel
Properties & advantages
Protects against falling over
Increases the utility value
Stainless steel shaft
ROTOR
IBC traverse
for mineral oils
Description:
The IBC traverse is used to safely remove and install the Pump tubes or the double diaphragm pump.
Suitable for Drum pumps, Eccentric screw pumps B70 and Diaphragm pumps
Includes transport straps for lifting vehicles and tensioning hooks for fixing to the container
Properties & advantages
Compatible with all standard IBC containers
Material: stainless steel
Clamping hook: galvanised steel
for Drum pumps / B70 Version: plastic guide sleeve with Ø 55 mm
Stainless steel shaft
ROTOR
Flow meters MDO 2
for mineral oils
Description:
The flow meter with display impresses with its simple, needs-based display, ease of operation and compact design. Thanks to the rotating Oval gear meters and a magnet integrated in the measuring chamber, it enables accurate measurement of the volume flow and measures mineral oils and alternative fuels precisely, quickly and, above all, efficiently.
Suitable for measuring alternative fuels
Properties & advantages
Measurement according to the oval gear principle
High measuring accuracy
Low pressure losses in the system
Measuring range (min. g/min) from 3 l/min - 80 l/min
Low frictional resistance
Stainless steel shaft
ROTOR
Foot strainer for Pump tubes Ø 41mm
for mineral oils
Description:
The foot strainer can be used for PP, PVDF, aluminium and stainless steel Pump tubes. By attaching the strainer to the pump foot, coarse impurities can be kept away from important components such as the drive (rotor, impeller).
For attaching to the pump base and the suction pipe with Ø 41 mm
Properties & advantages
Prevents contamination in the Pump tube by filtering it out
Outer pipe diameter 55 mm
Mesh size 20 x 2 mm