Drum pumps - Explosive media
Ex-Schutz
Elektrisch
Fasspumpe
*Abbildung kann vom tatsächlichen Produkt abweichen
Delivery time 4 days
Product number:
0150-005 + 0040-200
Product information "Drum pumps - Explosive media"
Description:
The Drum pump is suitable for low-viscosity, flammable and highly flammable hydrocarbons. Perfectly suited for the removal or decanting of solvents.
- Optionally available with Ex - plug
- Pump tubes equipped with Lutz original handwheel
- Suitable for filling or transferring alternative fuels, oils and flammable liquids
Properties & advantages
- Optionally with electric or compressed air drive
- No lubricants and therefore no contamination of the pumped liquid by lubricants
- Highly resistant high-grade carbon shaft bearing
- Maintenance without special tools
- Sealing modules of the sealless (DL) Pump can be replaced
- Approved in accordance with ATEX Directive 2014/34/EU, category 1/2
| Bearings (Material): | Charcoal |
|---|---|
| Delivery head (up to max. m wc)*.: | 56, 66 |
| Density (up to kg/dm³): | 1,7, 2,8 |
| Design/Equipment: | Comfort grip, With Low voltage release |
| Drive shaft (Material): | Stainless steel (1.4571) |
| Drive type: | Compressed air, Electric |
| Flow rate (up to max. g/min)*.: | 7.13 |
| Frequency (Hz): | 60 |
| Immersion depth (inch): | from 39" (1000 mm), from 47" (1200 mm) |
| Immersion tube diameter (max. inch): | 1.6 |
| Impeller (Material): | ETFE (ethylene tetrafluoroethylene copolymer) |
| Liquid temperature (max. °C): | 212 (413,6 °F) |
| Mechanical seal (Material): | No Seals in contact with the medium |
| Operating pressure (max. bar): | 87 |
| Power (W): | 640, 1000 |
| Pump tube material (Material): | Niro (stainless steel) |
| Static seal (Material): | No Seals in contact with the medium |
| Suitable fluids: | Acetic acid, Acetone, Butanol, Butyl acetate, Ethanol, Ethyl acetate, Formic acid, Isopropanol, Methanol, Nicotine, Paraffin, Petrol, Petroleum, Styrene, Toluene |
| Thread (inch) outside: | 1 1/4" |
| Type of impeller / Drive type: | Radial-flow impeller |
| Type of seal: | Sealless (SL) |
| Viscosity (up to max. mPas)*.: | 750, 1000 |
| Voltage (V): | 120 |
Accessory Items
Ex-Schutz
Elektrisch
Fasspumpe
Solvent hose set (NBR)
for highly flammable hydrocarbons
Description:
The hose set is suitable for a wide range of commercially available solvents. The hose is electrically conductive so that it can also be used in potentially explosive environments. The set is used for connection to the Pump tube or dispensing nozzle.
Also available in special lengths on request
Electrically conductive
Properties & advantages
Hose connection: 1 1/4" female thread
Nominal diameter: DN 19 (3/4")
Pre-assembled hose connections
Complies with EU regulations 10/2011 and 1935/2004
Ex-Schutz
Elektrisch
Fasspumpe
Hose set for potentially explosive media
for highly flammable hydrocarbons
Description:
The hose set is suitable for pure chemicals and explosive liquids. The hose is electrically conductive so that it can also be used in potentially explosive environments. The set is used for connection to the Pump tube or dispensing nozzle.
Also available in special lengths on request
Electrically conductive
Properties & advantages
Hose connection: 1 1/4" female thread
Nominal diameter: DN 19 (3/4")
Pre-assembled hose connections
Complies with EU regulations 10/2011 and 1935/2004