Industries
Drum pumps for industries
A wide variety of liquids are used in industry. In order to guarantee the resistance of the products, several materials are used. We supply the right material for every fluid.
Battery
Drum pump
Drum pump battery - Mineral oils
for oils and cooling lubricants
Description:
The new B3 Battery is a Battery motors for demanding and efficient pump applications. The current-independent application area: enables the greatest possible flexibility with the world's highest volume flow of a battery pump (up to 180 l/m). Perfectly suited for extracting or transferring mineral oils.
Examples of media: Diesel, heating oil, hydraulic oil, machine oil and engine oil etc.
Pump tube equipped with Lutz Original handwheel
Suitable for filling or decanting alternative fuels
Properties & advantages
wear-free, particularly low-noise BLDC motor
Optimised drum emptying
Infinitely variable
Extremely high Power with low weight
Maintenance without special tools
Sealing modules of the sealless (DL) Pump can be replaced
Long service life
Drum pump aluminium with Motor B 55-T-5 (120 V)
Suitable for hardly flammable liquids in non-explosive environments.
Examples of liquids: Low-viscosity and slightly viscous mineral oils, diesel, heating oil, cooling lubricants, crude oil, glycerine, fatty acids, linseed oil, etc.
Properties:
No grease filling in the Pump tubes
Optimised drum emptying
Modular, service-friendly design
Advantages:
No contamination of the pumped liquid by lubricants
Universally resistant PTFE shaft bearing
Two impeller shapes for a needs-based conveying capacity
Maintenance without special tools
Sealing modules of the mechanical seal-sealed (GLRD) or seal-less (DL) pump are interchangeable
Ex-Schutz
Druckluft
Fasspumpe
Drum pump for Complete drainage - Explosive media
for highly flammable hydrocarbons
Description:
The Drum pump is suitable for low-viscosity, flammable and combustible liquids and hydrocarbons. Perfectly suited for the removal or transfer of explosive media and solvents.
Optionally available with Ex - plug
Pump tubes equipped with Lutz original handwheel
Suitable for emptying drums of alternative fuels, oils and flammable liquids
Properties & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped liquid by lubricants
Optimised drum emptying with a residual volume of approx. 0.1 litres
No leaks if the Pump tube is tilted or repositioned
Maximum product utilisation with reduced drum cleaning and disposal costs
Approved in accordance with ATEX Directive 2014/34/EU, category 1/2
Battery
Drum pump
Accumulator Drum pumps - concentrated acids and alkalis
for highly chemical liquids and salts
Description:
The new B3 Battery is a Battery motors for demanding and efficient pump applications. The current-independent application area: enables the greatest possible flexibility with the world's highest volume flow of a battery pump (up to 180 l/m). Perfectly suited for withdrawing or transferring concentrated acids and alkalis.
Examples of media: Chloric acid, chromic acid, sulphuric acid, nitric acid, hydrofluoric acid and sodium hypochlorite etc.
Pump tubes equipped with Lutz original handwheel
Properties & advantages
wear-free, particularly low-noise BLDC motor
Optimised drum emptying
Infinitely variable
Extremely high Power with low weight
Maintenance without special tools
Seal modules of the seal-less (DL) Pump can be replaced
Long service life
Explosion protection
electric
Complete set
Pump set for Complete drainage - Explosive media
For aggressive and highly flammable liquids
Description:
The pump set is suitable for low-viscosity, flammable and highly flammable liquids and hydrocarbons. Perfectly suited for dispensing or transferring explosive media and solvents.
Optionally available with Ex - plug
Pump tubes equipped with Lutz original handwheel
Suitable for emptying drums of alternative fuels, oils and flammable liquids
Properties & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped liquid by lubricants
Optimised drum emptying with a residual volume of approx. 0.1 litres
No leaks if the Pump tube is tilted or repositioned
Maximum product utilisation with reduced drum cleaning and disposal costs
Approved in accordance with ATEX Directive 2014/34/EU, category 1/2
Battery
Drum pump
HC Wave
Accumulator Drum pumps - Acids
for acidic liquids
Description:
The new B3 Battery is a Battery motors for demanding and efficient pump applications. The current-independent application area: enables the greatest possible flexibility with the world's highest volume flow of a battery pump (up to 180 l/m). Perfectly suited for extracting or transferring acids.
Examples of media: Hydrochloric acid, battery acid, iron-III-chloride, phosphoric acid, chromic acid and citric acid etc.
Pump tubes equipped with Lutz original handwheel
Suitable for filling or decanting oils such as rapeseed oil and vegetable oil
Properties & advantages
Wear-free, particularly low-noise BLDC motor
Optimised drum emptying
Infinitely variable
Extremely high Power with low weight
Maintenance without special tools
Sealing modules of the sealless (DL) Pump can be replaced
Long service life
Drum pump MP-PP with Motor B 55-T-5 (120 V)
Suitable for mixing and pumping corrosive, aqueous to slightly viscous media in non-hazardous environments.
Examples of liquids: Emulsions, suspensions, dispersions, paints and varnishes, etc.
Properties:
Two functions (Pumping and Mixing and pumping) in one device
No grease filling in the Pump tubes
Modular, service-friendly design
Advantages:
Switching between pumping and mixing and pumping without repositioning during operation via a small lever below the handwheel
High mixing and pumping capacity for thorough homogenisation and fast emptying
No contamination of the pumped medium by lubricants
Note: Always mix with drum cover
Ex-Schutz
Elektrisch
Fasspumpe
Drum pumps - Explosive media
for highly flammable hydrocarbons
Description:
The Drum pump is suitable for low-viscosity, flammable and highly flammable hydrocarbons. Perfectly suited for the removal or decanting of solvents.
Optionally available with Ex - plug
Pump tubes equipped with Lutz original handwheel
Suitable for filling or transferring alternative fuels, oils and flammable liquids
Properties & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped liquid by lubricants
Highly resistant high-grade carbon shaft bearing
Maintenance without special tools
Sealing modules of the sealless (DL) Pump can be replaced
Approved in accordance with ATEX Directive 2014/34/EU, category 1/2
Drum pump RE-PP with Motor B 36/MI-4 (120 V)
DescriptionThis electrically operated Drum pump is specially designed for the safe and virtually residue-free emptying of tanks containing corrosive, neutral and slightly viscous media. With a residual volume of only approx. 0.1 litres, it enables maximum product utilisation and significantly reduces cleaning and disposal costs. Thanks to its durable PTFE shaft bearing and the absence of lubricants, it is also ideal for demanding applications - without any risk of contamination.Typical pumped media:Acids, alkalis, acidic and alkaline solutions, hydrazine, phosphates, sulphates, nitrates
Optimised drum emptying with a residual volume of approx. 0.1 litre
No grease filling in the Pump tubes
Properties & advantages:
No problematic "tipping" to dispense remaining residual quantities
Maximum product utilisation with reduced drum cleaning and disposal costs
No leaks if the Pump tube is tilted or moved
No contamination of the pumped liquid by lubricants