Drum pump for Complete drainage - Explosive media
Ex-Schutz
Druckluft
Fasspumpe
*Abbildung kann vom tatsächlichen Produkt abweichen
Delivery time 4 days
Product number:
0151-158 + 0004-736
Product information "Drum pump for Complete drainage - Explosive media"
Description:
The Drum pump is suitable for low-viscosity, flammable and combustible liquids and hydrocarbons. Perfectly suited for the removal or transfer of explosive media and solvents.
- Optionally available with Ex - plug
- Pump tubes equipped with Lutz original handwheel
- Suitable for emptying drums of alternative fuels, oils and flammable liquids
Properties & advantages
- Optionally with electric or compressed air drive
- No lubricants and therefore no contamination of the pumped liquid by lubricants
- Optimised drum emptying with a residual volume of approx. 0.1 litres
- No leaks if the Pump tube is tilted or repositioned
- Maximum product utilisation with reduced drum cleaning and disposal costs
- Approved in accordance with ATEX Directive 2014/34/EU, category 1/2
| Bearings (Material): | Charcoal |
|---|---|
| Delivery head (up to max. m wc)*.: | 49, 118 |
| Density (up to kg/dm³): | 1,7, 2,8 |
| Design/Equipment: | Comfort grip, With Low voltage release |
| Drive shaft (Material): | Stainless steel (1.4571) |
| Drive type: | Compressed air, Electric |
| Flow rate (up to max. g/min)*.: | 4.89, 12.68 |
| Frequency (Hz): | 60 |
| Immersion depth (inch): | from 39" (1000 mm), from 47" (1200 mm) |
| Immersion tube diameter (max. inch): | 1.6 |
| Impeller (Material): | ETFE (ethylene tetrafluoroethylene copolymer) |
| Liquid temperature (max. °C): | 212 (413,6 °F) |
| Mechanical seal (Material): | Carbon, ceramic, PTFE, HC-4 (2.4610), stainless steel (1.4571) |
| Operating pressure (max. bar): | 87 |
| Power (W): | 640, 1000 |
| Pump tube material (Material): | Niro (stainless steel) |
| Static seal (Material): | FEP coated |
| Suitable fluids: | Acetic acid, Acetone, Butanol, Butyl acetate, Ethanol, Ethyl acetate, Formic acid, Isopropanol, Methanol, Nicotine, Paraffin, Petrol, Petroleum, Styrene, Toluene |
| Thread (inch) outside: | 1 1/4" |
| Type of impeller / Drive type: | Radial-flow impeller |
| Type of seal: | mechanical seal (MS) |
| Viscosity (up to max. mPas)*.: | 600, 1000 |
| Voltage (V): | 120 |