Pump tubes industry
Stainless steel shaft
Impeller
Aluminium pumping station
for mineral oils
Description:
The Lutz pumping station (aluminium) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various motors are available that you can combine with the pumping station at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pumping unit equipped with Lutz Original handwheel
Suitable for filling or transferring alternative fuels
Features & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped medium by lubricants
Optimised drum emptying
Universally resistant ETFE shaft bearing
Maintenance without special tools
Sealing modules of the mechanical seal (GLRD) or of the sealless (DL) pump interchangeable
HC Wave
Impeller
PVDF pumping station
for concentrated acids and alkalis
Description:
The Lutz pumping station (PVDF) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various motors are available that you can combine with the pumping station at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pumping unit equipped with Lutz original handwheel
Features & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped liquid by lubricants
Optimised drum emptying
Universally resistant PTFE shaft bearing
Maintenance without special tools
Seal modules of the mechanical seal-sealed (GLRD) or seal-less (DL) pump are interchangeable
HC Wave
Laufrad
Pumping station PP
for low-viscosity acids
Description:
The Lutz pumping station (PP) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various motors are available that you can combine with the pumping station at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pumping unit equipped with Lutz Original handwheel
Suitable for filling or decanting oils such as rapeseed oil and vegetable oil
Features & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped medium by lubricants
Optimised drum emptying
Universally resistant PTFE shaft bearing
Maintenance without special tools
Sealing modules of the mechanical seal (GLRD) or of the sealless (DL) pump interchangeable
Stainless steel shaft
Impeller
Pumping station PP
for low-viscosity alkaline solutions
Description:
The Lutz pumping station (PP) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various motors are available that you can combine with the pumping station at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pumping unit equipped with Lutz Original handwheel
Suitable for filling or decanting oils such as rapeseed oil and vegetable oil
Features & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped medium by lubricants
Optimised drum emptying
Universally resistant PTFE shaft bearing
Maintenance without special tools
Sealing modules of the mechanical seal (GLRD) or of the sealless (DL) pump interchangeable
Explosion protection
Impeller
Niro pumping station
for flammable liquids
Description:
The Lutz pumping station (stainless steel) is suitable for low-viscosity, flammable and explosive liquids. Depending on the application, various motors are available which can be combined with the pumping station at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pumping unit equipped with Lutz original handwheel
Suitable for filling or transferring alternative fuels, oils and flammable liquids
Features & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped medium by lubricants
Approved in accordance with ATEX Directive 2014/34/EU, category 1/2
Highly resistant high-grade carbon shaft bearing
Maintenance without special tools
Seal modules of the mechanical seal-sealed (GLRD) or seal-less (DL) pump are interchangeable
HC Wave
Rotor
Pumping station PP
for low-viscosity acids
Description:
The Lutz pumping station (PP) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various motors are available that you can combine with the pumping station at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pumping unit equipped with Lutz Original handwheel
Suitable for filling or decanting oils such as rapeseed oil and vegetable oil
Features & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped medium by lubricants
Optimised drum emptying
Universally resistant PTFE shaft bearing
Maintenance without special tools
Sealing modules of the mechanical seal (GLRD) or of the sealless (DL) pump interchangeable
Explosion protection
Rotor
Niro pumping station
for flammable liquids
Description:
The Lutz pumping station (stainless steel) is suitable for low-viscosity, flammable and explosive liquids. Depending on the application, various motors are available which can be combined with the pumping station at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pumping unit equipped with Lutz original handwheel
Suitable for filling or transferring alternative fuels, oils and flammable liquids
Features & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped medium by lubricants
Approved in accordance with ATEX Directive 2014/34/EU, category 1/2
Highly resistant high-grade carbon shaft bearing
Maintenance without special tools
Seal modules of the mechanical seal-sealed (GLRD) or seal-less (DL) pump are interchangeable
HC Wave
Rotor
PVDF pumping station
for concentrated acids and alkalis
Description:
The Lutz pumping station (PVDF) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various motors are available that you can combine with the pumping station at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pumping unit equipped with Lutz original handwheel
Features & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped liquid by lubricants
Optimised drum emptying
Universally resistant PTFE shaft bearing
Maintenance without special tools
Seal modules of the mechanical seal-sealed (GLRD) or seal-less (DL) pump are interchangeable
Stainless steel shaft
Rotor
Pumping station PP
for low-viscosity alkaline solutions
Description:
The Lutz pumping station (PP) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various motors are available that you can combine with the pumping station at any time. This gives you flexibility at all times and conserves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pumping unit equipped with Lutz Original handwheel
Suitable for filling or decanting oils such as rapeseed oil and vegetable oil
Features & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped medium by lubricants
Optimised drum emptying
Universally resistant PTFE shaft bearing
Maintenance without special tools
Sealing modules of the mechanical seal (GLRD) or of the sealless (DL) pump interchangeable
Explosion protection
Impeller
Niro pumping station for residual emptying
for flammable liquids
Description:
The Lutz pumping station for residual emptying (stainless steel) is suitable for low-viscosity, flammable and explosive liquids. Depending on the application, various motors are available that you can combine with the pumping station at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pumping unit equipped with Lutz Original handwheel
Suitable for emptying drums of alternative fuels, oils and flammable liquids
Features & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped liquid by lubricants
Optimised drum emptying with a residual quantity of approx. 0.1 litre
No leaks if the pumping station is tilted or moved
Maximum product utilisation with reduced barrel cleaning and disposal costs
Sealing module of the mechanical seal pump (GLRD) can be replaced
Explosion protection
Rotor
Niro pumping station for mixing and pumping
for flammable liquids
Description:
The Lutz pumping station (stainless steel) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various motors are available which can be combined with the pumping station at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pumping unit equipped with Lutz original handwheel
Suitable for mixing and pumping alternative fuels, oils and flammable liquids
Features & benefits
Also available with Tri-Clamp connection
Optionally with electric or compressed air drive
two functions (pumping and mixing) in one device
No leaks when the pump unit is tilted or moved
High mixing and conveying capacity for thorough homogenisation
switching between the pumping and mixing functions takes place without interrupting ongoing operation, which is made possible by a small lever on the handwheel
Stainless steel shaft
Rotor
Pumping station aluminium
for mineral oils
Description:
The Lutz pumping station (aluminium) is suitable for low-viscosity, aggressive and non-flammable media. Depending on the application, various motors are available that you can combine with the pumping station at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pumping unit equipped with Lutz Original handwheel
Suitable for filling or transferring alternative fuels
Features & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped medium by lubricants
Optimised drum emptying
Universally resistant ETFE shaft bearing
Maintenance without special tools
Sealing modules of the mechanical seal (GLRD) or of the sealless (DL) pump interchangeable
Niro
Rotor
Niro pumping station
Suitable for B2 Vario and B2 Battery
Description:
The Lutz pumping unit (Niro) is suitable for low-viscosity, oil-based lubricants, cold cleaners and plasticisers. With the appropriate motor, it is suitable for medium to large filling quantities. Depending on requirements, the pumping station can be operated with the B2 Vario electric motor or the B2 Battery version.
Examples of media: Lubricants (oil-based), cold cleaners, plasticisers
For dispensing small quantities from hobbocks, canisters and drums
Suitable for motor B2 Vario and B2 Battery
Features & advantages
No lubricants and therefore no contamination of the pumped medium
Optimised drum emptying
Maintenance without special tools
Universally resistant shaft bearing made of ETFE/PTFE
Sealless design (DL) conditionally dry-running safe
Explosion protection
Rotor
Pumping station HC
for flammable chemicals
Description:
The Lutz pumping station (HC) is suitable for low-viscosity, flammable and highly corrosive chemicals. Depending on the application, various motors are available which can be combined with the pumping station at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pumping unit equipped with Lutz original handwheel
Used in the areas of fire and disaster control
Features & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped medium by lubricants
Approved in accordance with ATEX Directive 2014/34/EU, category 1/2
Highly resistant carbon and ETFE shaft bearings
Maintenance without special tools
Sealing modules of the sealless (DL) pump can be replaced
Explosion protection
Laufrad
Pumping station HC
for flammable chemicals
Description:
The Lutz pumping station (HC) is suitable for low-viscosity, flammable and highly corrosive chemicals. Depending on the application, various motors are available which can be combined with the pumping station at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pumping unit equipped with Lutz original handwheel
Used in the areas of fire and disaster control
Features & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped medium by lubricants
Approved in accordance with ATEX Directive 2014/34/EU, category 1/2
Highly resistant carbon and ETFE shaft bearings
Maintenance without special tools
Sealing modules of the sealless (DL) pump can be replaced