Pumping stations Explosion protection
Explosion protection
Impeller
Niro pumping station
for flammable liquids
Description:
The Lutz pumping station (stainless steel) is suitable for low-viscosity, flammable and explosive liquids. Depending on the application, various motors are available which can be combined with the pumping station at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pumping unit equipped with Lutz original handwheel
Suitable for filling or transferring alternative fuels, oils and flammable liquids
Features & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped medium by lubricants
Approved in accordance with ATEX Directive 2014/34/EU, category 1/2
Highly resistant high-grade carbon shaft bearing
Maintenance without special tools
Seal modules of the mechanical seal-sealed (GLRD) or seal-less (DL) pump are interchangeable
Explosion protection
Rotor
Niro pumping station
for flammable liquids
Description:
The Lutz pumping station (stainless steel) is suitable for low-viscosity, flammable and explosive liquids. Depending on the application, various motors are available which can be combined with the pumping station at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pumping unit equipped with Lutz original handwheel
Suitable for filling or transferring alternative fuels, oils and flammable liquids
Features & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped medium by lubricants
Approved in accordance with ATEX Directive 2014/34/EU, category 1/2
Highly resistant high-grade carbon shaft bearing
Maintenance without special tools
Seal modules of the mechanical seal-sealed (GLRD) or seal-less (DL) pump are interchangeable
Explosion protection
Impeller
Niro pumping station for residual emptying
for flammable liquids
Description:
The Lutz pumping station for residual emptying (stainless steel) is suitable for low-viscosity, flammable and explosive liquids. Depending on the application, various motors are available that you can combine with the pumping station at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pumping unit equipped with Lutz Original handwheel
Suitable for emptying drums of alternative fuels, oils and flammable liquids
Features & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped liquid by lubricants
Optimised drum emptying with a residual quantity of approx. 0.1 litre
No leaks if the pumping station is tilted or moved
Maximum product utilisation with reduced barrel cleaning and disposal costs
Sealing module of the mechanical seal pump (GLRD) can be replaced
Explosion protection
Rotor
Niro pumping station for mixing and pumping
for flammable liquids
Description:
The Lutz pumping station (stainless steel) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various motors are available which can be combined with the pumping station at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pumping unit equipped with Lutz original handwheel
Suitable for mixing and pumping alternative fuels, oils and flammable liquids
Features & benefits
Also available with Tri-Clamp connection
Optionally with electric or compressed air drive
two functions (pumping and mixing) in one device
No leaks when the pump unit is tilted or moved
High mixing and conveying capacity for thorough homogenisation
switching between the pumping and mixing functions takes place without interrupting ongoing operation, which is made possible by a small lever on the handwheel
Explosion protection
Rotor
Pumping station HC
for flammable chemicals
Description:
The Lutz pumping station (HC) is suitable for low-viscosity, flammable and highly corrosive chemicals. Depending on the application, various motors are available which can be combined with the pumping station at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pumping unit equipped with Lutz original handwheel
Used in the areas of fire and disaster control
Features & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped medium by lubricants
Approved in accordance with ATEX Directive 2014/34/EU, category 1/2
Highly resistant carbon and ETFE shaft bearings
Maintenance without special tools
Sealing modules of the sealless (DL) pump can be replaced
Explosion protection
Laufrad
Pumping station HC
for flammable chemicals
Description:
The Lutz pumping station (HC) is suitable for low-viscosity, flammable and highly corrosive chemicals. Depending on the application, various motors are available which can be combined with the pumping station at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pumping unit equipped with Lutz original handwheel
Used in the areas of fire and disaster control
Features & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped medium by lubricants
Approved in accordance with ATEX Directive 2014/34/EU, category 1/2
Highly resistant carbon and ETFE shaft bearings
Maintenance without special tools
Sealing modules of the sealless (DL) pump can be replaced
Explosion protection
Laufrad
DMP Niro pumping station for residual emptying
for flammable liquids
Description:
The Lutz DMP pumping unit for residual emptying (stainless steel) is suitable for low-viscosity, flammable and explosive liquids. The pumping unit can be combined with our 1/2" compressed air double diaphragm pump. This ensures that the liquids are drained and thus conserves important resources.
Can be combined with the compressed air double diaphragm pump 1/2"
Suitable for emptying drums of alternative fuels, oils and flammable liquids
Features & advantages
No lubricants and therefore no contamination of the pumped liquid by lubricants
Optimised drum emptying with remaining residual quantity of approx. 0.1 litre
No leaks if the pumping station is tilted or moved
Maximum product utilisation with reduced barrel cleaning and disposal costs
Sealing module of the mechanical seal pump (GLRD) can be replaced