Electrolysis systems

Our electrolysis systems, including specialised sodium hypochlorite systems and chlorine electrolysis systems, use advanced technologies to perform safe and efficient water treatment. In contrast to conventional systems, they enable on-site production to meet demand and thus avoid the handling of hazardous chemicals.

Sodium hypochlorite systems

Sodium hypochlorite systems generate sodium hypochlorite via an electrolysis process using salt as the base material. The system automatically extracts a saturated salt solution from the salt solution tank, which is then diluted with softened water to the optimum concentration for efficient electrolysis. The diluted salt is transported to the electrolytic cell automatically, where an electric current flows through the solution, producing sodium hypochlorite. The automatic process cycle is repeated until the product tank is full.

MINICHLORGEN

A reliable electrolysis system for the production of sodium hypochlorite

MINICHLORGEN electrolysis systems provide a needs-based supply of <1.0 % sodium hypochlorite solution, which is produced by the electrolysis of a diluted brine solution. Generated in close proximity to the process, the direct storage and dosing of sodium hypochlorite rules out accidental spillage of the sodium hypochlorite and contract with the operating personnel.

MINICHLORGEN versions are available with chlorine capacities of 30, 60, and 90 g/h
robust and attractive plastic cover
coloured LED illumination of the electrolysis chamber shows the chlorine production process and displays the current operating status via a simple LED colour change
user-friendly membrane keyboard, multilingual operating panel, and OLED display with green, orange, and red LED operating status display
Operating parameters display and code-protected programming
Alarm event log with real-time recording
Volume flow measurement of water and brine for electrolysis with constantly high efficiency
safe operation by ambient air monitoring with a hydrogen detector
Remote transmission of fault messages, data logging, and RS485 options
MINICHLORGEN is supplied with fixing material for wall mounting, product tank level monitoring, and a brine priming device

Product information

*Illustration may differ from the actual product

EASYCHLORGEN

An innovative electrolysis system for the efficient and safe production of chlorine bleach

EASYCHLORGEN sodium hypochlorite systems produce sodium hypochlorite from brine by electrolysis. The sodium hypochlorite has a concentration of approx. 0.5 – 0.8 %.

The production, storage and dosing of chlorine bleach directly on site minimises the risk of accidental release and prevents employees from coming into contact with it.

Production of <1% sodium hypochlorite via the local electrolysis of brine
safe and completely sealed electrolysis procedure
easy to operate
integrated control with OLED screen and simple 3-button operation
Manual and automatic operation
multilingual operating display option
Telemetry alarm event & data logging option
Performance classes from 240 g/h – 60 kg/h sodium hypochlorite available

Advantages

eliminate delivery & handling of hazardous chemicals
use of salt as a precursor
demand-orientated production on site
no outgassing in dosing pumps
no encrustation on dosing points
particularly labour protection-friendly for the operator

Product information

Product information 240 g/h - 60 kg/h

Flow-trough chlorine electrolysis systems

Disinfection is a vital part of the water treatment process used for swimming pool water. We maintain a long-standing partnership with Technopool in the field of flow-through electrolysis to extract chlorine from the salt dissolved in the water for disinfection in swimming pools. Discover our efficient TECHNOMAT and TECHNOSTAR flow-through chlorine electrolysis systems for environmentally friendly and safe water disinfection.

An overview of the basic features of our flow-through chlorine electrolysis systems

Swimming pool water disinfection without hazardous materials
Salt as resource
no use of chlorine chemicals
simple installation
control via measurement and control technology possible
low maintenance effort
Disinfectant capacity externally and locally controllable
easy handling
Manual control possible
safe, economical, and environmentally friendly
no reddened eyes, no irritation of the mucosa
for indoor and outdoor swimming pools

Flow-trough chlorine electrolysis system TECHNOMAT PS

Water disinfection in private swimming pools

TECHNOMAT provides a high-quality and innovative method of disinfection using electrolysis for medium-sized swimming pools. TECHNOMAT disinfects swimming and wading pool water without the need to store and use the hazardous substances chlorine gas, chlorine bleach or chlorine tablets. The chlorine required for disinfection is first generated on site in the swimming and wading pool water from ordinary NaCl salt (cooking salt, sea salt, sodium chloride) in an entirely safe fashion, bringing a pleasant side effect: salty water.

Salt water has a revitalising effect, is gentle to the skin and relaxing. It promises a quality of life that you can enjoy every day with the flow-through chlorine electrolysis systems from Technopool. The systems work in accordance with the SALT-WATER-LIGHT® procedure, which has been proven internationally in private applications, hotel units, therapy pools and publicly and privately-operated indoor and outdoor swimming pools.

The specific features of TECHNOMAT PS

compact design, installation in very small spaces
for pool volume of max. 75 m³
Safety transformer with thermofuse
Primary and secondary protection by mains and overload protector
insensitive to current fluctuations

Product information

*Illustration may differ from the actual product

Flow-trough chlorine electrolysis system TECHNOSTAR

Effective solutions for water disinfection in public swimming facilities

The generation of hypochlorous acid takes place in an electrolytic cell installed in a bypass of the supply water pipe. It is controlled via a measurement and control system, which has a continuous controller output with a PI control response of 4 to 20 mA. Each electrolytic cell in the electrolytic systems TECHNOSTAR can be equipped with a temperature sensor for temperature control.

An insight into the special features of TECHNOSTAR

practice-tested and proven
Conforms to DIN 19643
no chlorine gas room and its safety requirements
self-cleaning function, usually no acidification required
high-quality electrode material (titanium)
swimming pool water that is gentle to the skin
no typical chlorine smell in the swimming pool

Product information

Our complete range of electrolysis systems

TECHNOMAT

Flow-through chlorine electrolysis system TECHNOMAT PSFor water disinfection in private swimming pools The TECHNOMAT provides a medium-sized swimming pool with a high-quality and innovative method of disinfection using electrolysis. The TECHNOMAT disinfects the pool water without the use and storage of hazardous substances such as chlorine gas, chlorine bleach or chlorine tablets. The chlorine required for disinfection is obtained on site from ordinary NaCl salt (table salt, sea salt, sodium chloride) in the pool water - completely safe and with a pleasant side effect: salty water. Salt water has a revitalising effect, is kind to the skin and relaxing at the same time. It promises a quality of life that you can enjoy every day with the flow-through chlorine electrolysis systems from Technopool. The systems work according to the SALT-WATER-LIGHT® process, which has been tried and tested worldwide in private homes, hotel facilities, therapy and exercise pools as well as in municipal and commercial indoor and outdoor swimming pools. Features & advantages Compact design, installation in the smallest of spaces for pool volumes of max. 75 m³ Safety transformer with thermal fuse Primary and secondary protection through mains fuse and overload protection Insensitive to current fluctuations

Details

Your contact person

Lutz France S.A.S.

Do you have questions about the optimum solution for your processes?

Whether you have customised pump systems, industry-specific requirements or technical queries - our team of experts will provide you with competent and personal advice. Get in touch with us now.

+33 179973710
commercial@lutz-france.fr

Contact request France

Do you have questions about a product or do you have a project you would like to enquire about?

Please complete the following form as best you can and let us know your requirements. A member of staff will then contact you by e-mail or telephone to discuss everything else.

As a rule, your enquiry will be processed within 48 hours on working days.

Title

First name *

Family name *

Country *

Company

Email address *

Telephone number

Comments *

Please provide as much information as possible so that we can process your request efficiently. Your data will be processed responsibly and in accordance with data protection regulations.

Fields marked with asterisks (*) are required.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Privacy*

By selecting continue you confirm that you have read and agree to our data protection information.

Further informationen about the usage of your personal data can be found here

To the products

To the contact person