Drum pump Lutz B2 Vario PVDF
Electric
Fasspumpe
slide 2 of 3
*Illustration may differ from the actual product
Available, delivery time: 2-5 days
Product number:
0201-580
Product information "Drum pump Lutz B2 Vario PVDF"
Description:
The B2 Vario pump set is suitable for low-viscosity acids, alkalis and chemicals. The set is suitable for dispensing small containers such as canisters, hobbocks and drums. The pump is flexible at all times and thus conserves important resources.
- Infinitely variable speed controller for transferring and filling small quantities
Features & advantages
- Sealless design (DL) conditionally dry-running safe
- Infinitely variable
- Powerful motor with improved service life
- Easy to service and dismantle
| Bearing (material): | ETFE / PTFE |
|---|---|
| Conveyor wheel (material): | ETFE (ethylene-tetrafluorethylene copolymer) |
| Conveyor wheel shape / drive type: | Axial-flow rotor |
| Delivery head (up to max. mWS)*: | 7 |
| Delivery rate (up to max. l/min)*: | 75 |
| Density (up to kg/dm³): | 1.3 |
| Design/equipment: | mit Drehzahlsteller |
| Drive shaft (material): | Hastelloy C (2.4610) |
| Drive type: | Electric |
| Frequency (Hz): | 50 |
| Immersion depth (mm): | up to 500 mm |
| Immersion tube diameter (max. mm): | 32 |
| Mechanical seal (material): | no seals in contact with the medium |
| Power (W): | 200 |
| Protection class: | IP24 |
| Pumped liquid temperature (max °C): | 90 |
| Pumping unit material (material): | PVDF (polyvinylidene fluoride) |
| Seal type: | Sealless (SL) |
| Static seal (material): | no seals in contact with the medium |
| Suitable media: | Naphthalin, Natriumhypochlorit, Nitric acid, Perchloric acid |
| Thread (inch) external: | 1" |
| Viscosity (up to max. mPas)*: | 300 |
| Voltage (V): | 230 |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter
Accessory Items
slide 1 to 2 of 2
Electric
Fasspumpe
Drum pump Lutz B2 Vario PP
for higher delivery heads
Description:
The B2 Vario drum pump is suitable for low-viscosity, aqueous to slightly viscous media. The set is suitable for removing small containers such as canisters, hobbocks and drums. The pump is flexible at all times and thus conserves important resources.
Infinitely variable speed controller for transferring and filling small quantities
Features & advantages
Sealless design (DL) conditionally dry-running safe
Infinitely variable
Powerful motor with improved service life
Easy to service and dismantle
Electric
Fasspumpe
Drum pump Lutz B2 Vario Niro
for higher delivery heads
Description:
The B2 Vario drum pump is suitable for low-viscosity, aqueous to slightly viscous media. The set is suitable for removing small containers such as canisters, hobbocks and drums. The pump is flexible at all times and thus conserves important resources.
Infinitely variable speed controller for transferring and filling small quantities
Features & advantages
Sealless design (DL) conditionally dry-running safe
Infinitely variable
Powerful motor with improved service life
Easy to service and dismantle
Accessory Items
slide 9 to 13 of 9
Electric
Fasspumpe
Suspension device
for higher delivery heads
Description:
The suspension device is used to safely store the B2 Vario drum and laboratory pump. This protects the pumps and increases their utility value at the same time.
Precisely adapted to the B2 Vario drum pump
Features & advantages
Increases the utility value
Protection against the pumping unit or drum pump falling down
Electric
Fasspumpe
Barrel adapter
for higher delivery heads
Description:
The drum adapter is for fastening the pump or pump unit in the drum opening. It prevents the pump from tipping over when the drum is empty.
Materials: PP / ST37 / steel, galvanised / PE
Features & advantages
Stabilisation of the pumping unit
External thread 2", 56 x 4 and 70 x6
Electric
Fasspumpe
Barrel adapter PP
for higher delivery heads
Description:
The drum adapter stabilises the pumping unit or pump in the drum or container opening and prevents the pump from tipping over when the drum is empty.
Detailed information on the various container openings is available on request
for the B2 pumping unit
Features & advantages
Stabilisation of the drum pump
Protection against the pumping unit falling out
Electric
Fasspumpe
TR3 flow meter (PVDF)
for higher delivery heads
Description:
Easy to operate, compact design and quick to install on all drum and container pumps: The Lutz TR3 flow meter in PP or PVDF. A handy meter that you can "count on" in any situation. The symmetrical measuring chamber can be used for all flow directions and measures low-viscosity, non-flammable media precisely, quickly and, above all, efficiently.
PVDF for highly aggressive liquids
Examples of media: Chlorine bleach, nitric acid, sulphuric acid, ...
Two 1.5 V batteries (AAA) replaceable
Features & advantages
Measurement according to the turbine wheel principle
Displays the partial and total quantity
Variable display orientation
Mobile on a drum pump or with nozzle connection
Measuring range from 5 l/min - 120 l/min
Simple battery change
Electric
Fasspumpe
Foot strainer PP
for higher delivery heads
Description:
For attaching to the pump foot. This keeps coarse impurities away from the rotating parts so that wear and tear on the pump can be reduced.
Is placed on the pump base
Features & benefits
Protects important parts from contamination
Reduces wear and tear on the pump
Electric
Fasspumpe
Dispensing nozzle PVDF
for higher delivery heads
Description:
For filling and decanting concentrated acids and alkalis. The housing and the valve plug of the dispensing nozzle are made of polyvinylidene fluoride (PVDF) and are equipped with a protective bracket and two outlet nozzles(Ø 23 mm and Ø 12mm). The dispensing nozzle is sealed with an FPM seal.
FFPM or FEP / FPM seals are available at extra cost on request
Connection: external thread G 1 1/4"
Optionally available as a variant with a push-button for direct operation of the relay module (no communication module required)
Features & benefits
Simple adjustment of the volume flow
Easy to operate
Safe filling and Decanting the respective liquid
Electric
Fasspumpe
Set accessories B2 Vario
for higher delivery heads
Description:
The set of accessories is suitable for low-viscosity, aqueous to slightly viscous media. The set is suitable for the pump B2 Vario in the PP and stainless steel version.
Also available in special lengths on request
Electric
Fasspumpe
IBC traverse
for higher delivery heads
Description:
The IBC lifting beam is used to safely remove and install the pumping units or the double diaphragm pump.
Suitable for drum pumps, B70 progressive cavity pumps and diaphragm pumps
Includes transport straps for lifting vehicles and tensioning hooks for fixing to the container
Features & advantages
Compatible with all standard IBC containers
Material: stainless steel
Clamping hook: galvanised steel
for drum pumps / B70 version, guide sleeve with Ø 55 mm made of plastic