Skip to main content

Gas detectors

When handling solid, liquid and gaseous chemicals, safety must be given the highest priority. For gas-conveying installations, Lutz-Jesco offers devices that monitor the surrounding air and respond to the slightest traces of gas, in which case they set off an alarm or warning signal, depending on their configuration.

Gas warning device EASYCON GW


A versatile partner

Working with dangerous gases involves fulfilling high safety conditions for the protection of people and the environment. Included in such safety measures is the monitoring of the ambient air with gas warning devices, which register the increased concentration of gases in the shortest of time and release an alarm if the maximum limits are exceeded.

Such gas warning devices are typically used in chlorine gas areas of swimming pools or water works, but also in other installations in industry with ozone and other dangerous gases.

  • For use with chlorine gas, chlorine dioxide and ozone
  • Compact wall casing
  • Up to 4 sensors and additionally up to 4 temperature sensors
  • Two freely adjustable alarm thresholds of the alarm for each sensor
  • 3 – 9 potential-free relay outputs
  • 4 Analogue outputs 0/4 – 20 mA
  • Large colour touch-display
  • Data is saved on a USB flash drive

Gas detector GW 601


Safety all along the line

The gas detector GW 601 is a stationary, continuously operating measuring, monitoring and warning system, which finds its use with the application of toxic gases. The gas detector GW 601 consists of two individual components, which function as one unit: the gas monitoring and warning center GWZ 601 and the transmitter CM 601. The latter combines a sensor for chlorine gas and an electronic that amplifies the sensor signals.

Our complete range of gas warning devices

Filter
Gas detector GW 601
Description:Safety all along the line The gas detector GW 601 is a stationary, continuously operating measuring, monitoring and warning system, which finds its use with the application of toxic gases. The gas detector GW 601 consists of two individual components, which function as one unit: the gas monitoring and warning center GWZ 601 and the transmitter CM 601. The latter combines a sensor for chlorine gas and an electronic that amplifies the sensor signals.Features & advantages: Downloadshttps://www.lutzjescoamerica.com/fileadmin/data/dokumente/pg2/LJ-GW601-EN-BA.pdf
Gas warning device EASYCON GW
Description:A versatile partner Working with dangerous gases involves fulfilling high safety conditions for the protection of people and the environment. Included in such safety measures is the monitoring of the ambient air with gas warning devices, which register the increased concentration of gases in the shortest of time and release an alarm if the maximum limits are exceeded. Such gas warning devices are typically used in chlorine gas areas of swimming pools or water works, but also in other installations in industry with ozone and other dangerous gases.Features & advantages: For use with chlorine gas, chlorine dioxide and ozone Compact wall casing Up to 4 sensors and additionally up to 4 temperature sensors Two freely adjustable alarm thresholds of the alarm for each sensor 3 – 9 potential-free relay outputs 4 Analogue outputs 0/4 – 20 mA Large colour touch-display Data is saved on a USB flash drive Measuring rangesChlorine gasppm 0 – 10.00 Chlorine dioxide 0 – 1.00 Ozone 0 – 1.00 Number of sensors Up to 4 sensors and additionally up to 4 temperature sensors Relay outputs max. 5 A, 250 V AC Switch point alarm 2 Analog outputs 4 x 0/4 – 20 mA, working resistance max. 500 Ohm Display Colour touch-display (5.0 inch; 800 x 480 pixels) Voltage supply 100 – 240 V AC, 50/60 Hz Power consumptionW max. 20 Protection classGas warning device IP65 Sensor IP54 (except for gas inlet) Downloadshttps://www.lutzjescoamerica.com/fileadmin/data/dokumente/pg4/LJ-EASYCON_GW-DE-BA.pdfhttps://www.lutzjescoamerica.com/fileadmin/data/dokumente/produktinfos/LJ-EASYCON_GW-DE-PI.pdfhttps://www.lutzjescoamerica.com/fileadmin/data/dokumente/pg4/LJ-EASYCON_GW-EN-BA.pdfhttps://www.lutzjescoamerica.com/fileadmin/data/dokumente/produktinfos/LJ-EASYCON_GW-EN-PI.pdf
Your contact person
Lutz-JESCO America Corp.
Do you have questions about dosing pumps, disinfection systems, chlorine dosing systems, system and process technology or measurement and control technology?
Our team of experts will be happy to assist you. Please send us an enquiry or call us directly.
+1 5854260990

Contact request America

Do you have questions about a product or have a project you would like to inquire about?
Please fill out the following form as completely as possible and let us know your requirements. A member of our team will then contact you by email or phone to discuss everything else.
Your inquiry will usually be processed within 48 hours on business days.
Please provide as much information as possible so that we can process your request efficiently. Your data will be processed responsibly and in accordance with data protection regulations.
Fields marked with asterisks (*) are required.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Privacy*

Further informationen about the usage of your personal data can be found here