Residual emptying operating principle
(1) When the sealing pot is open, the liquid can be pumped out.
(2) Sealing pot is closed. A return flow of the liquid is prevented, so the residual quantity can be "taken along" when the container is changed.
Complete drum drainage - environmentally friendly and cost-saving
Lutz pump tubes RE in stainless steel and polypropylene. They not only protect the environment, but also your wallet. On the one hand, the liquid is used to the maximum, on the other hand, the costs for disposing of residuals are drastically reduced, as only the smallest residues remains in the containers. The pump foot is closed when the motor is running by lowering the sealing pot inside the pump tube. The sealing pot locks the pump foot and prevents the liquid that has flowed in from running back into the drum. Locking is done in the blink of an eye - via a small lever below the handwheel. Once the motor is switched off, the pump tube with the enclosed liquid can be moved to the next drum.
How does the residual emptying pump tube work?
Unsere Produkte
Our complete range of waste bins
Explosion protection
Impeller
Pump tube Niro for Complete drainage
for flammable liquids
Description:
The Lutz Pump tube for Complete drainage (stainless steel) is suitable for low-viscosity, flammable and explosive liquids. Depending on the application, various Motors are available that you can combine with the Pump tube at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pump tubes equipped with Lutz Original handwheel
Suitable for emptying drums of alternative fuels, oils and flammable liquids
Properties & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped liquid by lubricants
Optimised drum emptying with a residual volume of approx. 0.1 litre
no leaks if the Pump tube is tilted or moved
Maximum product utilisation with reduced drum cleaning and disposal costs
sealing module of the mechanical seal (GLRD) pump can be replaced
Stainless steel shaft
Impeller
Pump tube PP for Complete drainage
for low-viscosity alkaline solutions
Description:
The Lutz Pump tube (PP) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various Motors are available, which you can combine with the Pump tube at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pump tubes equipped with Lutz Original handwheel
Suitable for emptying drums of oils such as rapeseed oil and vegetable oil
Properties & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped medium by lubricants
Optimised drum emptying with a residual volume of approx. 0.1 litre
no leaks if the Pump tube is tilted or moved
Maximum product utilisation with reduced drum cleaning and disposal costs
sealing module of the mechanical seal (GLRD) pump can be replaced
Foodstuffs
Explosion protection
Impeller
Pump tube Niro for Complete drainage - PURE
for Foodstuffs (PURE series)
Description:
The Lutz Pump tube for Complete drainage (Niro) PURE is suitable for aqueous and fatty Foodstuffs. Depending on the application, various Motors are available that you can combine with the Pump tube at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pump tubes equipped with Lutz original handwheel
for emptying drums for alcoholic Foodstuffs, cosmetics and pharmaceutical products as well as flammable cleaning agents
Properties & advantages
Physiologically safe version
Connections: suitable for foodstuffs
Optimised drum emptying with a residual volume of approx. 0.1 litre
Maximum product utilisation with reduced drum cleaning and disposal costs
Approved according to FDA and Regulation (EC) 1935/2004
Approved in accordance with ATEX Directive 2014/34/EU, category 1/2
HC Wave
Impeller
Pump tube PP for Complete drainage
for low-viscosity acids
Description:
The Lutz Pump tube (PP) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various Motors are available, which you can combine with the Pump tube at any time. This gives you flexibility at all times and conserves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pump tubes equipped with Lutz Original handwheel
Suitable for emptying drums of oils such as rapeseed oil and vegetable oil
Properties & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped medium by lubricants
Optimised drum emptying with a residual volume of approx. 0.1 litre
no leaks if the Pump tube is tilted or moved
Maximum product utilisation with reduced drum cleaning and disposal costs
sealing module of the mechanical seal (GLRD) pump can be replaced
Your contact person
Lutz Pumps, Inc.
Do you have questions about drum pumps, container emptying, double diaphragm pumps, flow measurement or centrifugal pumps?
Our team of experts will be happy to assist you. Please send us an enquiry or call us directly.
001 / 770 / 9 25 12 22 or (800) 8 43 39 01 toll free
infolpi@lutzjescoamerica.com
