MEMDOS SMART LDX, LAX, LPX
Reliable dosing of chemicals
The new generation of the stepper motor-driven diaphragm dosing pump MEMDOS SMART provides a wide range of attractive solutions for demanding dosing tasks. The new stepper motor technology permits high-accuracy dosing of even the smallest volumes. Asynchronous running with various speeds of the suction and pressure stroke enables homogeneous and pulse-reduced dosing. The further development of the Slow mode permits the transport of highly-viscous media at even greater levels of reliability and reproducibility.
Available in seven versions, the new generation of the MEMDOS SMART provides a range of different functionalities. Two sizes of the MEMDOS SMART series are available.
Several different materials and connections are available for suction and discharge side, depending on the specific applications.
MEMDOS SMART LB, LD, LK, LP
Precision that inspires
The MEMDOS SMART stepper motor-driven diaphragm dosing pump provides a wide range of solutions for high-precision and demanding dosing tasks. Its advanced drive system means that it is able to process even the smallest quantities with a high degree of accuracy. Homogeneous and low-pulsation dosing is made possible by asynchronous operation, in which the suction and pressure phases run at varying speeds.
Different materials and connections for the pressure and suction side of the dosing pump can be selected according to the specific requirements. Accessory sets consisting of a hose, injection nozzle and suction line are available to enable optimal results and quick installation.
Our complete range of stepper motor-driven diaphragm metering pumps
MEMDOS SMART LD
Description:Precision that inspires The compact stepper-motor pump, coupled with its intelligent drive concept, combines the big advantages of a solenoid-driven diaphragm dosing pump with the precision of a motor-driven diaphragm dosing pump. The MEMDOS SMART LD series is available in five capacity ranges. The MEMDOS SMART LD's drive is fully adjustable. Using position detection in the pump, after an unexpected shut down of the pump, overdosing can be prevented and downtime resulting from this can be excluded.Features & advantages: Capacity range 0.68 – 8.10 gph, up to 290 psig (232 for PVC) Power supply 110 – 240 V, 50/60 Hz, IP65, 25 W Microprocessor controlled drive Integrated dosing head venting facility (only MEMDOS SMART LK 2, LK 5 and LK 10 with dosing head made of plastic) Suitable for wall and floor mounting Material finishes PVC, PP, PVDF and stainless steel Stroke frequency can be precisely adjusted via the keyboard Graphic display Pulse input (increase and reduction) Level input with early warning and main alarm Release input for external start/stop Calculation wizard for pulse operation available online CSA and UL certified MEMDOS SMART LD 2510152030 Delivery capacity at max. pressuregph 0.681.42.853.755.48.10 ml/stroke 0.220.591.21.582.133.41 Max. delivery pressurepsig 290 (232*)232145887444 Delivery capacity at medium pressuregph 0.71.592.983.885.68.2 ml/stroke 0.280.671.261.632.193.44 Average back pressurepsig 14511672443622 Nominal stroke frequencyRPM 150 Suction lift for non-gassing mediaft. H2O 9.8 Max. supply / inlet pressurepsig 11.6 Diameter of diaphragmin 1.2991.5352.125 Valve size DN4 Voltage supply 110 – 240 V, -10 % / +5 %, 50/60 Hz Power consumptionW 25 Protection class IP65 (with covering caps on the connections) Insulation class F Material PVC, PP, PVDF, 1.4571 WeightPVC, PP, PVDFlb ~ 4.85 Stainless steel (1.4571) ~ 7.27 Max. ambient temperature°F 316SS & PVDF: 113° / PVC: 104° Max. temperature of the medium°F 316SS & PVDF: 176° / PP: 140° / PVC: 95° Downloadshttps://www.lutzjescoamerica.com/fileadmin/data/dokumente/pg1/LJ-MEMDOS_SMART_LB_LD-EN-BA.pdfhttps://www.lutzjescoamerica.com/fileadmin/data/data_usa/documents/pg1/Spec_Sheet-MEMDOS_SMART_LD.pdfhttps://www.lutzjescoamerica.com/fileadmin/data/data_usa/documents/pg1/Spec_Sheet-MEMDOS_SMART_LD-Spanish.pdf
MEMDOS SMART LP
Description:Precision that inspires The compact stepper-motor pump, coupled with its intelligent drive concept, combines the big advantages of a solenoid-driven diaphragm dosing pump with the precision of a motor-driven diaphragm dosing pump. The MEMDOS SMART LP series is available in five capacity ranges. The MEMDOS SMART LP's drive is fully adjustable. For integration into demanding automation networks, a version with an Ethernet-based MODBUS interface is available.Features & advantages: Capacity range 0.68 – 8.10 gph, up to 290 psig (232 for PVC) Power supply 110 – 240 V, 50/60 Hz, IP65, 25 W Microprocessor controlled drive Integrated dosing head venting facility (only MEMDOS SMART LP 2, LP 5 and LP 10 with dosing head made of plastic) Suitable for wall and floor mounting Material finishes PVC, PP, PVDF and stainless steel Stroke frequency can be precisely adjusted via the keyboard Graphic display with multi-language menu Analogue input and pulse input (increase and reduction) Level input with early warning and main alarm Release input for external start/stop Supply amount displayed in various units Maximum delivery rate can be limited Diaphragm replacement programme 2 Slow Motion modes for dosing viscous media Stroke feedback output Alarm relay output Batch dosing with interval and timer functions Dosing control input Diaphragm rupture input for leak monitoring Ethernet interface (optional) CSA and UL certified MEMDOS SMART LP 2510152030 Delivery capacity at max. pressuregph 0.681.42.853.755.48.10 ml/stroke 0.220.591.21.582.133.41 Max. delivery pressurepsig 290 (232*)232145887444 Delivery capacity at medium pressuregph 0.71.592.983.885.68.2 ml/stroke 0.280.671.261.632.193.44 Average back pressurepsig 14511672443622 Nominal stroke frequencyRPM 150 Suction lift for non-gassing mediaft. H2O 9.8 Max. supply / inlet pressurepsig 11.6 Diameter of diaphragmin 1.2991.5352.125 Valve size DN4 Voltage supply 110 – 240 V, -10 % / +5 %, 50/60 Hz Power consumptionW 25 Protection class IP65 (with covering caps on the connections) Insulation class F Material PVC, PP, PVDF, 1.4571 WeightPVC, PP, PVDFlb ~ 4.85 Stainless steel (1.4571) ~ 7.27 Max. ambient temperature°F 316SS & PVDF: 113° / PVC: 104° Max. temperature of the media°F 316SS & PVDF: 176° / PP: 140° / PVC: 95° Downloadshttps://www.lutzjescoamerica.com/fileadmin/data/dokumente/pg1/LJ-MEMDOS_SMART_LK_LP-EN-BA.pdfhttps://www.lutzjescoamerica.com/fileadmin/data/data_usa/documents/pg1/Spec_Sheet-MEMDOS_SMART_LP.pdfhttps://www.lutzjescoamerica.com/fileadmin/data/data_usa/documents/pg1/Spec_Sheet-MEMDOS_SMART_LP-Spanish.pdf
MEMDOS SMART LK
Description:Precision that inspires The compact stepper-motor pump, coupled with its intelligent drive concept, combines the big advantages of a solenoid-driven diaphragm dosing pump with the precision of a motor-driven diaphragm dosing pump. The MEMDOS SMART LK series is available in five capacity ranges. The MEMDOS SMART LK's drive is fully adjustable. In addition, the MEMDOS SMART LK gives you the possibility to reduce the suction speed in two steps to easily and more precisely dose even viscous dosing media.Features & advantages: Capacity range 0.68 – 8.10 gph, up to 290 psig (232 for PVC) Power supply 110 – 240 V, 50/60 Hz, IP65, 25 W Microprocessor controlled drive Integrated dosing head venting facility (only MEMDOS SMART LK 2, LK 5 and LK 10 with dosing head made of plastic) Suitable for wall and floor mounting Material finishes PVC, PP, PVDF and stainless steel Stroke frequency can be precisely adjusted via the keyboard Graphic display with multi-language menu Pulse input (increase and reduction) Level input with early warning and main alarm Release input for external start/stop Supply amount displayed in various units Maximum delivery rate can be limited Diaphragm replacement program One Slow Motion setup possible Stroke feedback output Alarm relay output CSA and UL certified MEMDOS SMART LK 2510152030 Delivery capacity at max. pressuregph 0.681.42.853.755.48.10 ml/stroke 0.220.591.21.582.133.41 Max. delivery pressurepsig 290 (232*)232145887444 Delivery capacity at medium pressuregph 0.71.592.983.885.68.2 ml/stroke 0.280.671.261.632.193.44 Average back pressurepsig 14511672443622 Nominal stroke frequencyRPM 150 Suction lift for non-gassing mediaft. H2O 9.8 Max. supply / inlet pressurepsig 11.6 Diameter of diaphragmin 1.2991.5352.125 Valve size DN4 Voltage supply 110 – 240 V, -10 % / +5 %, 50/60 Hz Power consumptionW 25 Protection class IP65 (with covering caps on the connections) Insulation class F Material PVC, PP, PVDF, 1.4571 WeightPVC, PP, PVDFlb ~ 4.85 Stainless steel (1.4571) ~ 7.27 Max. ambient temperature°F 316SS & PVDF: 113° / PVC: 104° Max. temperature of the medium°F 316SS & PVDF: 176° / PP: 140° / PVC: 95° Downloadshttps://www.lutzjescoamerica.com/fileadmin/data/dokumente/pg1/LJ-MEMDOS_SMART_LK_LP-EN-BA.pdfhttps://www.lutzjescoamerica.com/fileadmin/data/data_usa/documents/pg1/Spec_Sheet-MEMDOS_SMART_LK.pdfhttps://www.lutzjescoamerica.com/fileadmin/data/data_usa/documents/pg1/Spec_Sheet-MEMDOS_SMART_LK-Spanish.pdf
MEMDOS SMART LB
Description:Precision that inspires The compact stepper-motor pump, coupled with its intelligent drive concept, combines the big advantages of a solenoid-driven diaphragm dosing pump with the precision of a motor-driven diaphragm dosing pump. The MEMDOS SMART LB series is available in five capacity ranges. The MEMDOS SMART LB's drive is fully adjustable. To adapt the dosing performance, the stroke frequency can be manually adjusted across the range from 0 to 100 %.Features & advantages: Capacity range 0.68 – 8.10 gph, up to 290 psig (232 for PVC) Power supply 110 – 240 V, 50/60 Hz, IP65, 25 W Microprocessor controlled drive Integrated dosing head venting facility (only MEMDOS SMART LB 2, LB 5 and LB 10 with dosing head made of plastic) Suitable for wall and floor mounting Material finishes PVC, PP, PVDF and stainless steel Infinitely adjustable stroke frequency from 0 – 100 % Release input for external start/stop CSA and UL certified MEMDOS SMART LB 2510152030 Delivery capacity at max. pressuregph 0.681.42.853.755.48.10 ml/stroke 0.220.591.21.582.133.41 Max. delivery pressurepsig 290 (232*)232145887444 Delivery capacity at medium pressuregph 0.71.592.983.885.68.2 ml/stroke 0.280.671.261.632.193.44 Average back pressurepsig 14511672443622 Nominal stroke frequencyRPM 150 Suction lift for non-gassing mediaft. H2O 9.8 Max. supply / inlet pressurepsig 11.6 Diameter of diaphragmin 1.2991.5352.125 Valve size DN4 Voltage supply 110 – 240 V, -10 % / +5 %, 50/60 Hz Power consumptionW 25 Protection class IP65 (with covering caps on the connections) Insulation class F Material PVC, PP, PVDF, 1.4571 WeightPVC, PP, PVDFlb ~ 4.85 Stainless steel (1.4571) ~ 7.27 Max. ambient temperature°F 316SS & PVDF: 113° / PVC: 104° Max. temperature of the medium°F 316SS & PVDF: 176° / PP: 140° / PVC: 95° Downloadshttps://www.lutzjescoamerica.com/fileadmin/data/dokumente/pg1/LJ-MEMDOS_SMART_LB_LD-EN-BA.pdfhttps://www.lutzjescoamerica.com/fileadmin/data/data_usa/documents/pg1/Spec_Sheet-MEMDOS_SMART_LB.pdfhttps://www.lutzjescoamerica.com/fileadmin/data/data_usa/documents/pg1/Spec_Sheet-MEMDOS_SMART_LB-Spanish.pdf
Your contact person
Lutz-JESCO America Corp.
Do you have questions about dosing pumps, disinfection systems, chlorine dosing systems, system and process technology or measurement and control technology?
Our team of experts will be happy to assist you. Please send us an enquiry or call us directly.
+1 5854260990
infoljac@lutzjescoamerica.com
