Go to homepage
China
East Asia
France
Germany
Hungary
Middle East
Netherlands
Österreich
Portugal
Spain
Switzerland
United Kingdom
United States
Show all categories Drinking water Back

Water sampling station EASYPRO SMART

*Abbildung kann vom tatsächlichen Produkt abweichen

Product number: US-80000108

Product information "Water sampling station EASYPRO SMART"

Description:

Reliable and individual Designed to meet your every need, the EASYPRO system monitors and controls a range of water parameters in your swimming pool. The TOPAX® MC multi-channel controller installed in the EASYPRO subjects the water parameters to constant measurement, keeping them within the target range. It enables you to control a large number of actuators and permits easy and intuitive Operation. The multi-coloured LEDs provide an optical warning if the water parameters leave the target range. -->

Features & advantages:


EASYPRO components (fitted on the baseplate):
TOPAX® MC multi-channel controller Measuring cells and measuring cell fittings Sample water filter Flow control Flow controller DFR 45 with sampling water extraction point and installed temperature sensor Inflow and outflow tap Bracket for buffer solutions and buffer solutions for adjusting the measuring cells Multi-coloured LEDs Cover The measuring cells are partially packaged separately and not pre-installed.
EASYPRO for swimming pools MB-C ME-C MC-C MD-C MP-C MK-C MBB-C MEE-C
Dimensions
(W x H x D)		with covermm 500 x 530 x 117 approx. 500 x 933 x 128 approx. - -
without covermm 490 x 490 x 117 approx. 490 x 900 x 117 approx. 900 x 490 x 117 approx. 900 x 490 x 117 approx.
Sample water requirementl/h 30 approx. 2 x 30 approx.
Sample water inflow and discharge PE hose 6/8 + stop valve with G1/4 connection
Pressure resistancebar max. 6 max. 6, air gap required max. 6
Pressure loss in the water sampling stationbar 0.3 approx. 2 x 0,3 approx.
Mesh size sample water filterµm 300
Voltage supply 100 – 240 V AC, 50/60 Hz
Power consumptionW max. 20
Analogue outputs for remote transmission x 0/4 – 20 mA, working resistance max. 500 Ω
Disturbance variable inputmA 0/4 – 20
Interfaces Ethernet TCP/IP or RS485 Modbus RTU (optional)
Protection class IP65 (electronic controller)
Ambient temperature°C -5 to +45 (no exposure to direct sunlight)
Control characteristic P, PI, PID or PD behaviour, control direction selectable with disturbance variable feed forward, 2-side control selectable
v inputs (depending on version)
Number of measuring inputs 2a 3b 4c 3b 2 x 1 2 x 2a
Free chlorinemperometric 3-electrode measuring
cell with potentiostat (DMZ3.1)		mg/l 0 – 15 d - 0 – 15d - 0 – 15 d 2 x
0 – 15		 -
Diaphragm-covered measuring cellmg/l - - - 0 – 10e - -
Total chlorineDiaphragm-covered measuring cellmg/l - - - - 0 – 10e -
pH valuepH single-rod measuring cellpH 2 – 12f or 0 – 14f 2 x 2 – 12f or
2 x 0 – 14f
Redox valueRedox single-rod measuring cellmV - 0 – 1000 - 2 x 0 – 1000
Conductivity conductiveConductivity measuring cell (k=1)mS/cm - 0 – 2g),
0 – 20g) or
0 – 100g)		 -
TemperaturePt100°C 5 – 45 2 x 5 – 45
Output modules (depending on version)
Number of output modules up to 4
Servomotor relay 2 x 230 V AC, 5 A (ohmic load)
kΩ Potentiometer feedback: 1 – 10
Servomotor 20 mA Constant 0/4 – 20 mA output
Servomotor with 20 mA feedback
Relays 2 x 230 V AC, 5 A (ohmic load)
Optocoupler 2 x 80 V DC, 5 mA

Downloads