Go to homepage
China
East Asia
France
Germany
Hungary
Middle East
Netherlands
Österreich
Portugal
Spain
Switzerland
United Kingdom
United States
Show all categories Industrial applications Back

Water sampling station EASYPRO Industry

*Abbildung kann vom tatsächlichen Produkt abweichen

Product number: US-80000109

Product information "Water sampling station EASYPRO Industry"

Description:

Zuverlässig und individuell Mit der EASYPRO erhalten Sie ein komplett auf Ihre Bedürfnisse abgestimmtes System zur Überwachung und Regelung verschiedener Wasserparameter in Ihrem Schwimmbad. Durch den auf der EASYPRO verbauten Mehrkanalregler TOPAX® MC werden die Wasserparameter kontinuierlich gemessen und im Sollbereich gehalten. Er bietet die Möglichkeit eine Vielzahl von Aktoren und Stellgliedern anzusteuern und zeichnet sich durch seine sehr einfache und intuitive Bedienung aus. Die mehrfarbigen LEDs sorgen für eine optische Warnung, wenn die Wasserparameter den Sollbereich verlassen. -->

Features & advantages:


EASYPRO components (fitted on the baseplate)
TOPAX® MC multi-channel controller Measuring cells and measuring cell fittings Sample water filter Flow control Flow controller DFR 45 with sampling water extraction point and installed temperature sensor Inflow and outfl ow tap Bracket for buffer solutions and buffer solutions for adjusting the measuring cells Multi-coloured LEDs Cover The measuring cells are partially packaged separately and not pre-installed.
EASYPRO for industrial applications 1 2 3 4 1/1 2/2
Dimensions
(W x H x D)		with covermm 500 x 530 x 117 approx. 500 x 933 x 128 approx. - -
without covermm 490 x 490 x 117 approx. 490 x 900 x 117 approx. 900 x 490 x 117 approx. 900 x 490 x 117 approx.
Sample water requirementWith CS120 excess chlorine measuring celll/h 45 approx. -
With all other measuring cells 30 approx. 2 x
30 approx.
Sample water inflow and discharge PE hose 6/8 + stop valve with G1/4 connection
Pressure resistanceWith diaphragm-covered measuring cellbar max. 6, air gap required
With all other measuring cells max. 6
Pressure loss in the water sampling stationbar 0,3 approx.
Mesh size sample water filterµm 300
Voltage supply 100 – 240 V AC, 50/60 Hz
Power consumptionW max. 20
Analogue outputs for remote transmission 4 x 0/4 – 20 mA, working resistance max. 500 Ω
Disturbance variable inputmA 0/4 – 20
Interfaces Ethernet TCP/IP or RS485 Modbus RTU (optional)
Protection class IP65 (electronic controller)
Ambient temperature°C -5 to +45 (no exposure to direct sunlight)
Control characteristic P, PI, PID or PD behaviour, control direction selectable with disturbance variable feed forward, 2-side control selectable
v inputs (depending on version)
Number of measuring inputs 1 2a) 3b) 4c) 2 x 1 2 x 2a)
BromineDiaphragm-covered measuring cellmg/l 0 – 5e) -
Free chlorineAmperometric 3-electrode measuring cell with potentiostat (DMZ3.1)mg/l
0 – 15d)
2 x
0 – 15d)
CS120 excess chlorine measuring cellmg/l 0 – 10d) -
Diaphragm-covered measuring cellmg/l 0 – 10e) -
Chlorine dioxideAmperometric 3-electrode measuring cell with potentiostat (DMZ3.1)mg/l
0 – 15d)		 -
CS120 excess chlorine measuring cellmg/l 0 – 10d) -
Diaphragm-covered measuring cellmg/l 0 – 2e) -
Total chlorineDiaphragm-covered measuring cellmg/l 0 – 10e)) -
OzonMembranbedeckte Messzellemg/l 0 – 2e) -
pH valuepH single-rod measuring cellpH 2 – 12f) or 0 – 14f) 2 x
2 – 12f) or
2 x 0 – 14f)
Redox valueRedox single-rod measuring cellmV 0 – 1000 2 x
0 – 1000
Conductivity conductiveConductivity measuring cell (k=1)mS/cm 0 – 2g), 0 – 20g) oder 0 – 100g) 2 x 0 – 2g),
0 – 20g) oder
0 – 100g)
ChloriteDiaphragm-covered measuring cellmg/l 0 – 2e) -
Hydrogen peroxideDiaphragm-covered measuring cellmg/l 0 – 200e) -
TemperaturePt100°C 5 – 45 (standard version)
5 – 60 (can be configured via the Matchcode ordering system)
Output modules (depending on version)
Number of output modules up to 4 2 x up to 4
Servomotor relay 2 x 230 V AC, 5 A (ohmic load)
kΩ Potentiometer feedback: 1 – 10
Servomotor 20 mA Constant 0/4 – 20 mA output
Servomotor with 20 mA feedback
Relay 2 x 230 V AC, 5 A (ohmic load)
Optocoupler 2 x 80 V DC, 5 mA

Downloads