Pump tube PP
Skip image gallery
Stainless steel shaft
ROTOR
*Illustration may differ from the actual product
Available immediately, delivery time: 4 days
Product number:
0110-300
Product information "Pump tube PP"
Description:
The Lutz Pump tube (PP) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various Motors are available, which you can combine with the Pump tube at any time. This gives you flexibility at all times and conserves important resources.
- Also available in special immersion depths from 200 - 2500 mm
- Pump tubes equipped with Lutz Original handwheel
- Suitable for filling or decanting oils such as rapeseed oil and vegetable oil
Properties & advantages
- Optionally with electric or compressed air drive
- No lubricants and therefore no contamination of the pumped medium by lubricants
- Optimised drum emptying
- Universally resistant PTFE shaft bearing
- Maintenance without special tools
- Seal modules of the mechanical seal-sealed (GLRD) or seal-less (DL) Pump are interchangeable
| Bearings (Material): | ETFE / PTFE |
|---|---|
| Delivery head (up to max. m wc)*.: | 12 |
| Density (up to kg/dm³): | 1,4 |
| Drive shaft (Material): | Stainless steel (1.4571) |
| Flow rate (up to max. g/min)*.: | 44.91 |
| Immersion depth (inch): | from 19" (500 mm) |
| Immersion tube diameter (max. inch): | 41 |
| Impeller (Material): | PP (polypropylene) |
| Liquid temperature (max. °C): | 50 (122,0 °F) |
| Mechanical seal (Material): | No Seals in contact with the medium |
| Pump tube material (Material): | PP (polypropylene) |
| Static seal (Material): | No Seals in contact with the medium |
| Thread (inch) outside: | 1 1/4" |
| Type: | PP 41-R-DL SS |
| Type of impeller / Drive type: | Axial-flow rotor |
| Type of seal: | Sealless (SL) |
| Viscosity (up to max. mPas)*.: | 350 |
When should I use an impeller and when should I use a rotor in a pump tube?
When selecting the appropriate drive type for a Pump tube, the question often arises in practice as to whether an impeller or a rotor should be used. The decision depends largely on the hydraulic requirements of the specific application.
Application 1: High delivery pressure and greater delivery heads required
Requirement
If long hose or pipe runs need to be overcome, the fluid has increased Viscosity or density, or higher overall pressure losses occur, a greater delivery head is required.
Typical influencing factors are:
- Long hose lengths
- Viscous or heavy fluids
- Required pressure build-up in the system
Recommended solution
Impeller (L) = Radial impeller
The impeller is designed for applications where a stable pressure build-up is required. The pump tube thus enables reliable delivery even with increased resistance in the system and ensures a constant delivery capacity under demanding operating conditions.
Application 2: High flow rate with free discharge
Requirement
Where there is a free discharge and no significant Pressure losses in the delivery system, the priority is often to achieve the highest possible flow rate.
Typical influencing factors are:
- Short hose lengths
- Low flow resistance
- Focus on flow rate rather than delivery head
Recommended solution
Rotor (R) = Axial impeller
The rotor is designed for maximum flow rates at minimum back pressure. It is ideal for applications with a free outlet where large flow rates need to be delivered efficiently and economically.
Conclusion:
The choice between an impeller and a rotor depends primarily on the hydraulic requirements of the application. For higher pressure requirements and greater delivery heads, the impeller is the appropriate solution. For free discharge and where high flow rates are required, the rotor is recommended.
Skip product gallery
Similar Items
Stainless steel shaft
ROTOR
Pump tube PP
for low-viscosity alkaline solutions
Description:
The Lutz Pump tube (PP) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various Motors are available, which you can combine with the Pump tube at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pump tubes equipped with Lutz Original handwheel
Suitable for filling or decanting oils such as rapeseed oil and vegetable oil
Properties & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped medium by lubricants
Optimised drum emptying
Universally resistant PTFE shaft bearing
Maintenance without special tools
Seal modules of the mechanical seal-sealed (GLRD) or seal-less (DL) Pump are interchangeable
Stainless steel shaft
ROTOR
Pump tube PP
for low-viscosity alkaline solutions
Description:
The Lutz Pump tube (PP) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various Motors are available, which you can combine with the Pump tube at any time. This gives you flexibility at all times and conserves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pump tubes equipped with Lutz Original handwheel
Suitable for filling or decanting oils such as rapeseed oil and vegetable oil
Properties & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped medium by lubricants
Optimised drum emptying
Universally resistant PTFE shaft bearing
Maintenance without special tools
Seal modules of the mechanical seal-sealed (GLRD) or seal-less (DL) Pump are interchangeable
Stainless steel shaft
ROTOR
Pump tube PP
for low-viscosity alkaline solutions
Description:
The Lutz Pump tube (PP) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various Motors are available, which you can combine with the Pump tube at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pump tubes equipped with Lutz Original handwheel
Suitable for filling or decanting oils such as rapeseed oil and vegetable oil
Properties & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped medium by lubricants
Optimised drum emptying
Universally resistant PTFE shaft bearing
Maintenance without special tools
Seal modules of the mechanical seal-sealed (GLRD) or seal-less (DL) Pump are interchangeable
Skip product gallery
Accessory Items
Stainless steel shaft
ROTOR
TR3 Flow meter (PP)
for low-viscosity alkaline solutions
Description:
Easy to operate, compact design and quick to install on all drum and container pumps: the Lutz TR3 flow meter in PP or PVDF. A handy meter that you can "count on" in any situation. The symmetrical measuring chamber allows it to be used for all flow directions and measures low-viscosity, non-flammable media precisely, quickly and, above all, efficiently.
PP for neutral and aggressive media
Examples of media: Glycol, ferric chloride, hydrochloric acid, phosphoric acid, etc.
Two 1.5 V batteries (AAA) replaceable
Properties & advantages
Measurement according to the turbine wheel principle
Displays the partial and total quantity
Variable display position: variable
Mobile on a Drum pump or with nozzle connection
Measuring range (min. g/min) from 5 l/min - 120 l/min
Simple battery change
Stainless steel shaft
ROTOR
Dispensing nozzle PP
for low-viscosity alkaline solutions
Description:
For filling and decanting neutral and aggressive liquids. The dispensing nozzle's housing and valve plug are made of polypropylene (PP). The dispensing nozzle is also equipped with a protective bracket and two outlet nozzles(Ø 23 mm and Ø 12 mm).
Connection: external thread G 1 1/4"
Properties & advantages
Simple adjustment of the volume flow
Safe filling or decanting of the respective liquid
Easy to operate
Stainless steel shaft
ROTOR
PVC hose, fabric-reinforced
for low-viscosity alkaline solutions
Description:
The hose is suitable for aggressive and non-flammable liquids. It is made of fabric-reinforced PVC.
Also available in special lengths on request
Nominal diameter: DN 32 / DN 38
Properties & advantages
Operating pressure up to max. 6 / 7 bar
Stainless steel shaft
ROTOR
Barrel adapter
for low-viscosity alkaline solutions
Description:
The drum adapter is for fastening the Pump or Pump tubes in the drum opening. It prevents the Pump from tipping over when the drum is empty.
Material: PP / ST37 / steel, galvanised / PE
Properties & advantages
Stabilisation of the Pump tube
External thread 2", 56 x 4 and 70 x6
Stainless steel shaft
ROTOR
Suspension device
for low-viscosity alkaline solutions
Description:
The suspension device is used to store the Drum pumps and prevents them from falling over.
For Pump tubes with handwheel
Properties & advantages
Protects against falling over
Increases the utility value
Stainless steel shaft
ROTOR
PVC spiral hose
for low-viscosity alkaline solutions
Description:
The hose is suitable for aggressive and non-flammable liquids, but also for food liquids. It is made of PVC with embedded and galvanized steel wire helix (smooth inside and outside).
Also available in special lengths on request
Nominal width: DN 19 / DN 25 / DN 32
Features & advantages
Pumped medium temperature: -5 to +65 °COperating pressure max. 4.5 - 5 bar
Complies with EU Regulation 10/2011 and 1935/2004.
Stainless steel shaft
ROTOR
Foot strainer for Pump tubes Ø 41mm
for low-viscosity alkaline solutions
Description:
The foot strainer can be used for PP, PVDF, aluminium and stainless steel Pump tubes. By attaching the strainer to the pump foot, coarse impurities can be kept away from important components such as the drive (rotor, impeller).
For attaching to the pump base and the suction pipe with Ø 41 mm
Properties & advantages
Prevents contamination in the Pump tube by filtering it out
Outer pipe diameter 55 mm
Mesh size 20 x 2 mm
Stainless steel shaft
ROTOR
Hose connection
for low-viscosity alkaline solutions
Description:
The hose connection connects the delivery hoses to the Pump tubes, the double diaphragm pumps or the dispensing nozzle. When using a double diaphragm pump, a suitable reducing nipple must be used in addition to the hose connection
Special connections are available on request
Properties & advantages
Nominal diameters: DN 13 / DN 19 / DN 25 / DN 32
Material: PP / PVDF / aluminium / stainless steel / HC
Stainless steel shaft
ROTOR
Emissionsschutz-Fassadapter
for low-viscosity alkaline solutions
Beschreibung:
Verhindert beim Einsatz einer Fasspumpe das Austreten von gefährlichen Gasen aus dem Fass. Somit wird der Bediener, die Umwelt und der Antriebsmotor vor gefährlichen Gasen geschützt. Zwei Belüftungsventile gewähren einen Druckausgleich zwischen Fassinnerem und der umgebenen Atmosphäre.
optional mit entsprechendem Belüftungsventil und Containerdeckel
Dichtungen: FPM (alt. EPDM of FEP)
auf Anfrage sind Sondergewinde ( Tri-Sure 2", BCS 56 x 4 AG, Mauser 2", BCS 70 x 6 AG, M 64 x 4 AG) lieferbar
Eigenschaften & Vorteile
Anschluss für Gaspendelleitung: G 3/8"
Einschraubgewinde: G 2" AG
schneller Druckausgleich durch Belüftungsventile
einfache Montage
sichere Stabilität durch Federmechanismus
Stainless steel shaft
ROTOR
Outlet bend
for low-viscosity alkaline solutions
Description:
The discharge elbow enables the direct transfer or filling of liquids into another tank. They are available in the materials PP, aluminium and stainless steel and are screwed onto the pump outlet.
Nominal diameters: DN 19 / DN 25
Properties & advantages
Enables liquids to be transferred quickly and directly
Union nut (1 1/4")
Stainless steel shaft
ROTOR
IBC traverse
for low-viscosity alkaline solutions
Description:
The IBC traverse is used to safely remove and install the Pump tubes or the double diaphragm pump.
Suitable for Drum pumps, Eccentric screw pumps B70 and Diaphragm pumps
Includes transport straps for lifting vehicles and tensioning hooks for fixing to the container
Properties & advantages
Compatible with all standard IBC containers
Material: stainless steel
Clamping hook: galvanised steel
for Drum pumps / B70 Version: plastic guide sleeve with Ø 55 mm
Stainless steel shaft
ROTOR
Hose set alkalis + acids
for low-viscosity alkaline solutions
Description:
The hose set is suitable for aggressive and non-flammable liquids, but also for food liquids. The hose is made of PVC with an embedded and galvanised steel wire helix (smooth inside and outside). The set is used for connection to the Pump tube or nozzle.
Also available in special lengths on request
Properties & advantages
Nominal diameter (DN) 19 (3/4")
PP hose connection
Pre-assembled hose connections and hose clamps