Pump tube PP for Complete drainage
Stainless steel shaft
Impeller
*Abbildung kann vom tatsächlichen Produkt abweichen
Available, delivery time: 4 days
Product number:
0103-020
Product information "Pump tube PP for Complete drainage"
Description:
The Lutz Pump tube (PP) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various Motors are available, which you can combine with the Pump tube at any time. This gives you flexibility at all times and saves important resources.
- Also available in special immersion depths from 200 - 2500 mm
- Pump tubes equipped with Lutz Original handwheel
- Suitable for emptying drums of oils such as rapeseed oil and vegetable oil
Properties & advantages
- Optionally with electric or compressed air drive
- No lubricants and therefore no contamination of the pumped medium by lubricants
- Optimised drum emptying with a residual volume of approx. 0.1 litre
- no leaks if the Pump tube is tilted or moved
- Maximum product utilisation with reduced drum cleaning and disposal costs
- sealing module of the mechanical seal (GLRD) pump can be replaced
| Bearings (Material): | Charcoal |
|---|---|
| Delivery head (up to max. m wc)*.: | 15 |
| Density (up to kg/dm³): | 2,0 |
| Drive shaft (Material): | Stainless steel (1.4571) |
| Flow rate (up to max. g/min)*.: | 18.23 |
| Immersion depth (inch): | from 19" (500 mm) |
| Immersion tube diameter (max. inch): | 50 |
| Impeller (Material): | PP (polypropylene) |
| Liquid temperature (max. °C): | 50 (122,0 °F) |
| Mechanical seal (Material): | Carbon, ceramic, FPM, HC-4 (2.4610) |
| Pump tube material (Material): | PP (polypropylene) |
| Static seal (Material): | FPM (fluororubber) |
| Thread (inch) outside: | 1 1/4" |
| Type: | RE PP 41-L GLRD SS |
| Type of impeller / Drive type: | Radial-flow impeller |
| Type of seal: | mechanical seal (MS) |
| Viscosity (up to max. mPas)*.: | 1000 |
Accessory Items
Stainless steel shaft
Impeller
IBC traverse
for low-viscosity alkaline solutions
Description:
The IBC traverse is used to safely remove and install the Pump tubes or the double diaphragm pump.
Suitable for Drum pumps, Eccentric screw pumps B70 and Diaphragm pumps
Includes transport straps for lifting vehicles and tensioning hooks for fixing to the container
Properties & advantages
Compatible with all standard IBC containers
Material: stainless steel
Clamping hook: galvanised steel
for Drum pumps / B70 Version: plastic guide sleeve with Ø 55 mm
Stainless steel shaft
Impeller
Hose set alkalis + acids
for low-viscosity alkaline solutions
Description:
The hose set is suitable for aggressive and non-flammable liquids, but also for food liquids. The hose is made of PVC with an embedded and galvanised steel wire helix (smooth inside and outside). The set is used for connection to the Pump tube or nozzle.
Also available in special lengths on request
Properties & advantages
Nominal diameter (DN) 19 (3/4")
PP hose connection
Pre-assembled hose connections and hose clamps
Stainless steel shaft
Impeller
TR3 Flow meter (PP)
for low-viscosity alkaline solutions
Description:
Easy to operate, compact design and quick to install on all drum and container pumps: the Lutz TR3 flow meter in PP or PVDF. A handy meter that you can "count on" in any situation. The symmetrical measuring chamber allows it to be used for all flow directions and measures low-viscosity, non-flammable media precisely, quickly and, above all, efficiently.
PP for neutral and aggressive media
Examples of media: Glycol, ferric chloride, hydrochloric acid, phosphoric acid, etc.
Two 1.5 V batteries (AAA) replaceable
Properties & advantages
Measurement according to the turbine wheel principle
Displays the partial and total quantity
Variable display position: variable
Mobile on a Drum pump or with nozzle connection
Measuring range (min. g/min) from 5 l/min - 120 l/min
Simple battery change
Stainless steel shaft
Impeller
Hose connection
for low-viscosity alkaline solutions
Description:
The hose connection connects the delivery hoses to the Pump tubes, the double diaphragm pumps or the dispensing nozzle. When using a double diaphragm pump, a suitable reducing nipple must be used in addition to the hose connection
Special connections are available on request
Properties & advantages
Nominal diameters: DN 13 / DN 19 / DN 25 / DN 32
Material: PP / PVDF / aluminium / stainless steel / HC
Stainless steel shaft
Impeller
Barrel adapter
for low-viscosity alkaline solutions
Description:
The drum adapter is for fastening the Pump or Pump tubes in the drum opening. It prevents the Pump from tipping over when the drum is empty.
Material: PP / ST37 / steel, galvanised / PE
Properties & advantages
Stabilisation of the Pump tube
External thread 2", 56 x 4 and 70 x6
Stainless steel shaft
Impeller
PVC spiral hose
for low-viscosity alkaline solutions
Description:
The hose is suitable for aggressive and non-flammable liquids, but also for food liquids. It is made of PVC with an embedded and galvanised steel wire helix (smooth inside and outside).
Also available in special lengths on request
Nominal diameter (DN): DN 19 / DN 25 / DN 32
Properties & advantages
Operating pressure (max. 4.5 - 5 bar)
fulfils EU Regulation 10/2011 and 1935/2004.
Stainless steel shaft
Impeller
Dispensing nozzle PP
for low-viscosity alkaline solutions
Description:
For filling and decanting neutral and aggressive liquids. The dispensing nozzle's housing and valve plug are made of polypropylene (PP). The dispensing nozzle is also equipped with a protective bracket and two outlet nozzles(Ø 23 mm and Ø 12 mm).
Connection: external thread G 1 1/4"
Properties & advantages
Simple adjustment of the volume flow
Safe filling or decanting of the respective liquid
Easy to operate