Pump tube Niro for mixing and pumping
Explosion protection
ROTOR
*Abbildung kann vom tatsächlichen Produkt abweichen
Available, delivery time: 4 days
Product number:
0151-240
Product information "Pump tube Niro for mixing and pumping"
Description:
The Lutz Pump tube (stainless steel) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various Motors are available, which you can combine with the Pump tube at any time. This gives you flexibility at all times and conserves important resources.
- Also available in special immersion depths from 200 - 2500 mm
- Pump tubes equipped with Lutz Original handwheel
- Suitable for mixing and pumping alternative fuels, oils and flammable liquids
Properties & advantages
- Also available with Tri-Clamp connection
- Optionally with electric or compressed air drive
- Two functions (Mixing and pumping) in one device
- No leaks when the Pump tube is tilted or moved
- high mixing and delivery capacity for thorough homogenisation
- Switching between the Mixing and pumping functions takes place without interrupting ongoing operation, which is made possible by a small lever on the handwheel
| Bearings (Material): | Charcoal |
|---|---|
| Certification: | ATEX Directive (ATEX Directive 2014/34/EU) |
| Delivery head (up to max. m wc)*.: | 14,5 |
| Density (up to kg/dm³): | 1,4 |
| Drive shaft (Material): | Stainless steel (1.4571) |
| Explosion protection: | Yes |
| Flow rate (up to max. g/min)*.: | 57.06 |
| Immersion depth (inch): | from 39" (1000 mm) |
| Immersion tube diameter (max. inch): | 41 |
| Impeller (Material): | ETFE (ethylene tetrafluoroethylene copolymer) |
| Liquid temperature (max. °C): | 100 (212,0 °F) |
| Mechanical seal (Material): | Carbon, ceramic, PTFE, HC-4 (2.4610), stainless steel (1.4571) |
| Pump tube material (Material): | Niro (stainless steel) |
| Static seal (Material): | FPM (fluororubber) |
| Thread (inch) outside: | 1 1/4" |
| Type: | MP Niro 50/41-R GLRD |
| Type of impeller / Drive type: | Axial-flow rotor |
| Type of seal: | mechanical seal (MS) |
| Viscosity (up to max. mPas)*.: | 650 |
Accessory Items
Explosion protection
ROTOR
Potential equalisation cable
for flammable liquids
Description:
The potential equalisation cable is used for the electrically conductive connection between the Explosion proof Pump and Tank and has the function of earthing and potential equalisation.
2 m with fastening clip
Properties & advantages
Earthing and potential equalisation function
Explosion protection
ROTOR
Solvent hose set (NBR)
for flammable liquids
Description:
The hose set is suitable for a wide range of commercially available solvents. The hose is electrically conductive so that it can also be used in potentially explosive environments. The set is used for connection to the Pump tube or dispensing nozzle.
Also available in special lengths on request
Electrically conductive
Properties & advantages
Hose connection: 1 1/4" female thread
Nominal diameter: DN 19 (3/4")
Pre-assembled hose connections
Complies with EU regulations 10/2011 and 1935/2004
Explosion protection
ROTOR
Flow meters TS Type UN10 Ex
for flammable liquids
Description:
The first flowmeter with touchscreen display and backlighting impresses with its simple, needs-based display and operability, multilingual interface and compact design. Thanks to the rotating swash plate and a magnet, it enables precise measurement of the volume flow and measures solvents, acids, alkalis, highly flammable liquids, oils and neutral media precisely, quickly and, above all, efficiently. Optionally, the desired quantity can be preselected with the quantity preselection (relay module) so that the Pump or system switches off automatically after the selected quantity. This further simplifies and secures the operation of the systems.
Optional with volume preselection (relay module)
Media examples: Methanol, petrol, isopropanol, paraffin, formic acid, acetic acid, acetone, styrene, xylene, toluene, etc.
Mobile on a Drum pump or with dispensing nozzle connection or stationary in plant construction
Properties & advantages
Measurement according to the wobble disc principle
High measuring accuracy
Variable display position: variable
Touchscreen display with self-explanatory, multilingual user interface
Measuring range (min/min) from 10 l/min to 100 l/min
approved according to ATEX Directive 2014/34/EU, Category 2
Explosion protection
ROTOR
Brass petrol nozzle
for flammable liquids
Description:
For dispensing and transferring solvents and neutral liquids. The housing: and the valve plug of the dispensing nozzle are made of brass and are equipped with a swivel coupling and a protective bracket.The nozzle is sealed using a PTFE seal.
Connection: external thread G 1 1/4"
Properties & advantages
Safe filling or decanting of the respective liquid
Easy to operate
Rotary coupling ensures tightness at high pressure
For pumping in potentially explosive environments
Explosion protection
ROTOR
Universal chemical hose
for flammable liquids
Description:
The hose is suitable for pure chemicals, cosmetics, photographic chemicals, paints and adhesives, detergents and cleaning agents, hygiene products, as well as food and luxury foods. It is FDA and USP Class VI compliant. The Hose: is electrically conductive so that it can also be used in potentially explosive environments.
Also available in special lengths on request
Nominal diameter: DN 13 / DN 19 / DN 25 / DN 32 / DN 38 / DN 50
Properties & advantages
Operating pressure (max. 16 bar)
Colour coding: "blue/white/blue".
Complies with EU regulations 10/2011 and 1935/2004
Underpressure max 0.9 bar
Explosion protection
ROTOR
Barrel adapter
for flammable liquids
Description:
The drum adapter is for fastening the Pump or Pump tubes in the drum opening. It prevents the Pump from tipping over when the drum is empty.
Material: PP / ST37 / steel, galvanised / PE
Properties & advantages
Stabilisation of the Pump tube
External thread 2", 56 x 4 and 70 x6
Explosion protection
ROTOR
Hose integration
for flammable liquids
Description:
The hose connection ensures a good conductive transition between the hose and Pump tubes. The use of conductive hoses is mandatory in potentially explosive atmospheres. The ohmic resistance between the fittings must be less than106 ohms.
For Drum and container pumps
Properties & advantages
Material: stainless steel (1.4571)
for mineral oil hoses DN 19 / DN 25 / DN 32
Explosion protection
ROTOR
IBC traverse
for flammable liquids
Description:
The IBC traverse is used to safely remove and install the Pump tubes or the double diaphragm pump.
Suitable for Drum pumps, Eccentric screw pumps B70 and Diaphragm pumps
Includes transport straps for lifting vehicles and tensioning hooks for fixing to the container
Properties & advantages
Compatible with all standard IBC containers
Material: stainless steel
Clamping hook: galvanised steel
for Drum pumps / B70 Version: plastic guide sleeve with Ø 55 mm
Explosion protection
ROTOR
Hose set for potentially explosive media
for flammable liquids
Description:
The hose set is suitable for pure chemicals and explosive liquids. The hose is electrically conductive so that it can also be used in potentially explosive environments. The set is used for connection to the Pump tube or dispensing nozzle.
Also available in special lengths on request
Electrically conductive
Properties & advantages
Hose connection: 1 1/4" female thread
Nominal diameter: DN 19 (3/4")
Pre-assembled hose connections
Complies with EU regulations 10/2011 and 1935/2004
Explosion protection
ROTOR
Flow meters TS Type LM10 Ex
for flammable liquids
Description:
The first flow meter with touchscreen display and backlighting impresses with its simple, needs-based display and operability, multilingual interface and compact design. Thanks to the rotating swash plate and a magnet, it enables accurate measurement of the volume flow and measures solvents and highly flammable liquids, oils and neutral media precisely, quickly and, above all, efficiently. Optionally, the desired quantity can be preselected with the quantity preselection (relay module) so that the Pump or the system switches off automatically after the selected quantity. This further simplifies and secures the operation of the systems.
Optional with volume preselection (relay module)
Media examples: Methanol, petrol, isopropanol, paraffin, formic acid, acetic acid, acetone, styrene, xylene, toluene, etc.
Mobile on a Drum pump or with dispensing nozzle connection or stationary in plant construction
Properties & advantages
Measurement according to the wobble disc principle
High measuring accuracy
Variable display position: variable
Touchscreen display with self-explanatory, multilingual user interface
Measuring range (min/min) from 10 l/min to 100 l/min
approved according to ATEX Directive 2014/34/EU, Category 2
Explosion protection
ROTOR
Flow meters TS Type VA10 Ex
for flammable liquids
Description:
The first flowmeter with touchscreen display and backlighting impresses with its simple, needs-based display and operability, multilingual interface and compact design. Thanks to the rotating swash plate and a magnet, it enables precise measurement of the volume flow and measures solvents, acids, alkalis, highly flammable liquids, oils and neutral media precisely, quickly and, above all, efficiently. Optionally, the desired quantity can be preselected with the quantity preselection (relay module) so that the Pump or system switches off automatically after the selected quantity. This further simplifies and secures the operation of the systems.
Optional with volume preselection (relay module)
Media examples: Methanol, petrol, isopropanol, paraffin, formic acid, acetic acid, acetone, styrene, xylene, toluene, etc.
Mobile on a Drum pump or with dispensing nozzle connection or stationary in plant construction
Properties & advantages
Measurement according to the wobble disc principle
High measuring accuracy
Variable display position: variable
Touchscreen display with self-explanatory, multilingual user interface
Measuring range (min/min) from 10 l/min to 100 l/min
approved according to ATEX Directive 2014/34/EU, Category 2
Explosion protection
ROTOR
Dispensing nozzle Niro
for flammable liquids
Description:
For dispensing and transferring liquids in the Foodstuffs and Pharmaceutical Industry as well as flammable and highly flammable liquids. The housing and the valve plug of the dispensing nozzle are made of stainless steel (1.4571) and are equipped with a protective bracket and a swivel coupling.
EPDM seal is available on request at an extra charge
Connection: external thread G 1 1/4"
Properties & advantages
For pumping in potentially explosive environments
Simple adjustment of the volume flow
Easy to operate
Safe filling or transferring of the respective liquid
Rotary coupling ensures tightness at high pressure
Explosion protection
ROTOR
Solvent hose
for flammable liquids
Description:
The hose is suitable for a wide range of commercially available solvents. The hose is electrically conductive so that it can also be used in potentially explosive environments.
Also available in special lengths on request
Nominal diameter: DN 13 / DN 19 / DN 25 / DN 32 / DN 38 / DN 50
Electrically conductive
Properties & advantages
Operating pressure (max. 16 bar)
Colour coding: blue
fulfils EU regulations 10/2011 and 1935/2004
Underpressure max 0.9 bar
Similar Items
Explosion protection
ROTOR
Pump tube PP for mixing and pumping
for flammable liquids
Description:
The Lutz Pump tube (PP) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various Motors are available, which you can combine with the Pump tube at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pump tubes equipped with Lutz Original handwheel
Suitable for mixing and pumping oils such as rapeseed oil and vegetable oil
Properties & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped medium by lubricants
Two functions (pumping and pumping) in one device
no leaks if the Pump tube is tilted or moved
high mixing and conveying capacity for thorough homogenisation
Switching between the Mixing and pumping functions takes place without interrupting ongoing operation, which is made possible by a small lever on the handwheel
Explosion protection
ROTOR
Pump tube PP for mixing and pumping
for flammable liquids
Description:
The Drum pump is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various Motors are available, which you can combine with the Pump tube at any time. This gives you flexibility at all times and conserves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pump tubes equipped with Lutz Original handwheel
Suitable for mixing and pumping oils such as rapeseed oil and vegetable oil
Properties & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped medium by lubricants
two functions (pumping and pumping) in one device
no leaks if the Pump tube is tilted or moved
high mixing and conveying capacity for thorough homogenisation
Switching between the Mixing and pumping functions takes place without interrupting ongoing operation, which is made possible by a small lever on the handwheel
Explosion protection
ROTOR
Pump tube PP for mixing and pumping
for flammable liquids
Description:
The Lutz Pump tube (PP) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various Motors are available, which you can combine with the Pump tube at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pump tubes equipped with Lutz Original handwheel
Suitable for mixing and pumping oils such as rapeseed oil and vegetable oil
Properties & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped medium by lubricants
Two functions (pumping and pumping) in one device
no leaks if the Pump tube is tilted or moved
high mixing and conveying capacity for thorough homogenisation
Switching between the Mixing and pumping functions takes place without interrupting ongoing operation, which is made possible by a small lever on the handwheel