Progressing cavity pump unit B70V-SR in PURE version
Foodstuffs
Seals EPDM
*Abbildung kann vom tatsächlichen Produkt abweichen
Delivery time 2-3 weeks (approx. 10-15 working days)
Product number:
auf Anfrage_04
Product information "Progressing cavity pump unit B70V-SR in PURE version"
Description:
The Eccentric screw pumps B70V-SR (with reduction gear) in PURE design is suitable for pumping water-like to highly viscous media with and without fibres or solids. Depending on the application, various electric and Compressed air motors are available, which you can combine with the Pump tube at any time. This gives you flexibility at all times and saves important resources.
- Also available in special immersion depths
- Pump tubes equipped with Lutz Original handwheel
- Examples of media: viscous cosmetic products, Foodstuffs, etc.
Properties & advantages
- Uniform volume flow
- Quick and easy cleaning
- Gentle, low-pulsation product delivery
- Low wear and tear
- Ideal for mobile use
| Certification: | FDA-compliant, Regulation (EC) 1935/2004 |
|---|---|
| Connection: | Tri-Clamp |
| Delivery head (up to max. bar)*.: | 6 |
| Drive shaft (Material): | Stainless steel (1.4571) |
| Explosion protection: | No |
| Flow rate (up to max. g/min)*.: | 3.17 |
| Immersion depth (inch): | from 39" (1000 mm) |
| Immersion tube diameter (max. inch): | 54 |
| Liquid temperature (max. °C): | 140 (284,0 °F) |
| Mechanical seal (Material): | WC, SiC, FPM |
| Pressure joint (DN): | 50 |
| Pump tube material (Material): | Stainless steel (1.4571/1.4404) |
| Rotor (Material): | Stainless steel (1.4571) |
| Static seal (Material): | EPDM |
| Stator (Material): | PTFE (polytetrafluoroethylene) |
| Stator size: | 12.1 |
| Type: | B70V-SR Pure |
| Type of impeller / Drive type: | Torsion shaft (medium viscosity media) |
| Type of seal: | mechanical seal (MS) |
| Viscosity (up to max. mPas)*.: | 30000 |
Accessory Items
Foodstuffs
Seals EPDM
Tri-Clamp reducer
With reduction gearbox for Electric motors up to 230 Volt
Description:
The Tri-Clamp reducer is suitable for connecting Tri-Clamp fittings to a spigot.
Material: stainless steel (1.4408)
Properties & advantages
Connection Tri-Clamp (DN) 25 / 32 / 40 fittings
Connection Tri-Clamp (DN) 50 connection piece
Foodstuffs
Seals EPDM
Barrel adapter
With reduction gearbox for Electric motors up to 230 Volt
Description:
The drum adapter is required for fastening the Pump in the drum opening. It prevents the Pump from tipping over when the drum is empty.
Properties & advantages
Material: PP / St 37
Foodstuffs
Seals EPDM
Suspension device
With reduction gearbox for Electric motors up to 230 Volt
Description:
The suspension device is used to safely store the B70 Pumps. This protects the pumps and increases their utility value at the same time.
Precisely adapted to the B70V Eccentric screw pumps
Properties & advantages
Increases the utility value
Protection against dropping the Eccentric screw pumps
Foodstuffs
Seals EPDM
Hose connection
With reduction gearbox for Electric motors up to 230 Volt
Description:
The hose connection with Tri-Clamp is required for connecting the delivery hose to the Eccentric screw pumps B70, the discharge elbow or the Tri-Clamp fittings (consisting of hose nozzle, locking clamp and seal).
For Eccentric screw pumps
Properties & advantages
Material: stainless steel (1.4404)
For hoses with Nominal diameter (DN) 38 / DN 50
Foodstuffs
Seals EPDM
Potential equalisation cable
With reduction gearbox for Electric motors up to 230 Volt
Description:
The potential equalisation cable is used for the electrically conductive connection between the Explosion proof Pump and Tank and has the function of earthing and potential equalisation.
2 m with fastening clip
Properties & advantages
Earthing and potential equalisation function
Foodstuffs
Seals EPDM
Outlet bend
With reduction gearbox for Electric motors up to 230 Volt
Description:
The outlet elbow enables the direct transfer or filling of liquids into another tank by installing it on the pump outlet.
Material: stainless steel (1.4571, 1.4404)
Nominal diameter (DN): DN 50
Properties & advantages
Enables quick and direct transfer of liquids
Seals made of EPDM
incl. seal and clamp
Foodstuffs
Seals EPDM
Balancer
With reduction gearbox for Electric motors up to 230 Volt
Description:
The balancer makes it easier to insert and move the Pump in the Tank and has an infinitely variable load adjustment. It is equipped with a special fall protection in the event of a spring breakage and offers maximum safety for long-term applications.
For Drum pumps or Eccentric screw pumps
Properties & advantages
Load bearing capacity from 10 - 30 kg
Cable pull up to 2 m
Foodstuffs
Seals EPDM
Mounting flange
With reduction gearbox for Electric motors up to 230 Volt
Description:
The installation flange is attached to the B70V Pump and a counterflange. The flange is welded directly to the Pump tube.
Material: Stainless steel (1.4571)
Properties & advantages
DN 80 / PN 10
according to the standard: DIN 2576
Pumping unit diameter Ø 52-54 mm
Foodstuffs
Seals EPDM
Clamping device
With reduction gearbox for Electric motors up to 230 Volt
Description:
The clamping device is for fastening the Eccentric screw pump B70V in open and thick-walled drums and tanks.
Suitable for a wide range of pumping station diameters
Properties & advantages
Material: stainless steel
Foodstuffs
Seals EPDM
Hose integration
With reduction gearbox for Electric motors up to 230 Volt
Description:
For connecting conductive delivery hoses to the Pump, nozzle/outlet elbow or Tri-Clamp fittings in potentially explosive atmospheres. The hose connection ensures a good conductive transition between the conductive hose and the pump/fitting. The ohmic resistance between the fittings must be less than106 ohms. The hose bonding consists of a hose connector, a clamping shell, a locking clip and a seal.
For Eccentric screw pumps
Properties & advantages
Material: stainless steel (1.4404)
Only suitable in conjunction with the universal chemical hose
in accordance with the DIN EN 12 115 standard
Foodstuffs
Seals EPDM
Tri-Clamp locking clamp
With reduction gearbox for Electric motors up to 230 Volt
Description:
The Tri-Clamp locking clamp is suitable for connecting Tri-Clamp fittings to a spigot.
Material: stainless steel (1.4408)
Properties & advantages
Connection Tri-Clamp (DN) 50 fittings
Connection Tri-Clamp (DN) 50 connection piece
Seals included