Progressing cavity pump B70V-D Industry
Explosion protection
12 l/min.
Mechanical seal: (GLRD)
*Abbildung kann vom tatsächlichen Produkt abweichen
Delivery time 2-3 weeks (approx. 10-15 working days)
Product number:
0173-014
Product information "Progressing cavity pump B70V-D Industry"
Description:
The Eccentric screw pumps B70V-D 12.1 in the Industry version is a powerful positive displacement pump for medium, high viscosity and viscous media up to the limits of flowability. Depending on the application, various three-phase AC and Compressed air motors are available, which you can combine with the Pump tube at any time. This gives you flexibility at all times and saves important resources.
- Drive shaft designs also available in special immersion depths of 500 - 2000 mm
- Examples of media: viscous mineral oils, resins, emulsions, paints and many other thick substances.
Properties & advantages
- Uniform volume flow
- Quick and easy cleaning
- Gentle, low-pulsation product conveyance
- Smooth running and low wear
- Large selection of robust and powerful drive motors
- approved in accordance with ATEX Directive 2014/34/EU, category 1/2
| Certification: | ATEX Directive (ATEX Directive 2014/34/EU) |
|---|---|
| Delivery head (up to max. bar)*.: | 6 |
| Drive shaft (Material): | Stainless steel (1.4571) |
| Drive type: | Three-phase current |
| Explosion protection: | Yes |
| Flow rate (up to max. g/min)*.: | 3.17 |
| Immersion depth (inch): | from 39" (1000 mm) |
| Immersion tube diameter (max. inch): | 54 |
| Liquid temperature (max. °C): | 140 (284,0 °F) |
| Mechanical seal (Material): | Carbon, CrMO cast iron, FPM |
| Pump tube material (Material): | Stainless steel (1.4571/1.4404) |
| Rotor (Material): | Stainless steel (1.4571) |
| Static seal (Material): | FPM (fluororubber) |
| Stator (Material): | PTFE (polytetrafluoroethylene) |
| Stator size: | 12.1 |
| Thread (inch) outside: | 1 1/2" |
| Type: | B70V-D |
| Type of impeller / Drive type: | Cardan shaft (highly viscous media) |
| Type of seal: | mechanical seal (MS) |
| Viscosity (up to max. mPas)*.: | 100000 |
Accessory Items
Explosion protection
12 l/min.
Mechanical seal: (GLRD)
Hose integration
for Three-phase motors
Description:
The hose connection ensures a good conductive transition between the hose and Pump tubes. The use of conductive hoses is mandatory in potentially explosive atmospheres. The ohmic resistance between the fittings must be less than106 ohms.
For Eccentric screw pumps and double diaphragm pumps
Properties & advantages
Material: brass / stainless steel (1.4571)
For hoses with Nominal diameter (DN) 32 / DN 38 / DN 50
Explosion protection
12 l/min.
Mechanical seal: (GLRD)
Container lid
for Three-phase motors
Description:
The container lid is used to hold a drum adapter and is suitable for the IBC container
Nominal diameter: 150 and 225
Properties & advantages
Material: PE
Thread: 2" IG
Explosion protection
12 l/min.
Mechanical seal: (GLRD)
Balancer
for Three-phase motors
Description:
The balancer makes it easier to insert and move the Pump in the Tank and has an infinitely variable load adjustment. It is equipped with a special fall protection in the event of a spring breakage and offers maximum safety for long-term applications.
For Drum pumps or Eccentric screw pumps
Properties & advantages
Load bearing capacity from 10 - 30 kg
Cable pull up to 2 m
Explosion protection
12 l/min.
Mechanical seal: (GLRD)
Barrel adapter
for Three-phase motors
Description:
The drum adapter is required for fastening the Pump in the drum opening. It prevents the Pump from tipping over when the drum is empty.
Properties & advantages
Material: PP / St 37
Explosion protection
12 l/min.
Mechanical seal: (GLRD)
Clamping device
for Three-phase motors
Description:
The clamping device is for fastening the Eccentric screw pump B70V in open and thick-walled drums and tanks.
Suitable for a wide range of pumping station diameters
Properties & advantages
Material: stainless steel
Explosion protection
12 l/min.
Mechanical seal: (GLRD)
Potential equalisation cable
for Three-phase motors
Description:
The potential equalisation cable is used for the electrically conductive connection between the Explosion proof Pump and Tank and has the function of earthing and potential equalisation.
2 m with fastening clip
Properties & advantages
Earthing and potential equalisation function
Explosion protection
12 l/min.
Mechanical seal: (GLRD)
IBC traverse
for Three-phase motors
Description:
The IBC traverse is used to safely remove and install the Pump tubes or the double diaphragm pump.
Suitable for Drum pumps, Eccentric screw pumps B70 and Diaphragm pumps
Includes transport straps for lifting vehicles and tensioning hooks for fixing to the container
Properties & advantages
Compatible with all standard IBC containers
Material: stainless steel
Clamping hook: galvanised steel
for Drum pumps / B70 Version: plastic guide sleeve with Ø 55 mm
Explosion protection
12 l/min.
Mechanical seal: (GLRD)
Dispensing nozzle Niro
for Three-phase motors
Description:
For dispensing and transferring liquids in the Foodstuffs and Pharmaceutical Industry as well as flammable and highly flammable liquids. The housing and the valve plug of the dispensing nozzle are made of stainless steel (1.4571) and are equipped with a protective bracket and a swivel coupling.
EPDM seal is available on request at an extra charge
Connection: external thread G 1 1/4"
Properties & advantages
For pumping in potentially explosive environments
Simple adjustment of the volume flow
Easy to operate
Safe filling or transferring of the respective liquid
Rotary coupling ensures tightness at high pressure
Explosion protection
12 l/min.
Mechanical seal: (GLRD)
Hose connection
for Three-phase motors
Description:
For connection of delivery hoses to the B70V-D Pump tube.
Nominal diameters: DN 25 / DN 32 / DN 38
Properties & advantages
Connection thread: 1 1/2"
Material: stainless steel
Explosion protection
12 l/min.
Mechanical seal: (GLRD)
Mounting flange
for Three-phase motors
Description:
The installation flange is attached to the B70V Pump and a counterflange. The flange is welded directly to the Pump tube.
Material: Stainless steel (1.4571)
Properties & advantages
DN 80 / PN 10
according to the standard: DIN 2576
Pumping unit diameter Ø 52-54 mm