Progressing cavity pump B70V-D Industry
25 l/min.
Mechanical seal: (GLRD)
PTFE stator
*Abbildung kann vom tatsächlichen Produkt abweichen
Delivery time 2-3 weeks (approx. 10-15 working days)
Product number:
0171-121
Product information "Progressing cavity pump B70V-D Industry"
Description:
The Eccentric screw pumps B70V 25.1 in the steel version is a powerful positive displacement pump for medium, high viscosity and viscous media up to the limits of flowability. Depending on the application, various three-phase AC and Compressed air motors are available, which you can combine with the Pump tube at any time. This gives you flexibility at all times and conserves important resources.
- Drive shaft designs also available in special immersion depths of 500 - 2000 mm
- Examples of media: viscous mineral oils, resins, emulsions, paints and many other thick substances
Properties & advantages
- Uniform volume flow
- Quick and easy cleaning
- Gentle, low-pulsation product conveying
- Low wear
- Ideal for mobile use
| Delivery head (up to max. bar)*.: | 8 |
|---|---|
| Drive shaft (Material): | Steel (galvanised) |
| Drive type: | Three-phase current |
| Flow rate (up to max. g/min)*.: | 6.6 |
| Immersion depth (inch): | from 39" (1000 mm) |
| Immersion tube diameter (max. inch): | 54 |
| Liquid temperature (max. °C): | 80 (176,0 °F) |
| Mechanical seal (Material): | Carbon, CrMO cast iron, FPM |
| Pump tube material (Material): | Steel (galvanised) |
| Rotor (Material): | Steel |
| Static seal (Material): | FPM (fluororubber) |
| Stator (Material): | NBR light-coloured (nitrile butadiene rubber) |
| Stator size: | 50.1 |
| Thread (inch) outside: | 1 1/2" |
| Type: | B70V-D |
| Type of impeller / Drive type: | Torsion shaft (medium viscosity media) |
| Type of seal: | mechanical seal (MS) |
| Viscosity (up to max. mPas)*.: | 100000 |
Similar Items
25 l/min.
Mechanical seal: (GLRD)
PTFE stator
Progressing cavity pump B70V-D Industry
for Three-phase motors
Description:
The Eccentric screw pumps B70V-D 25.1 in the Industry version is a powerful positive displacement pump for medium, high viscosity and viscous media up to the limits of flowability. Depending on the application, various three-phase AC and Compressed air motors are available, which you can combine with the Pump tube at any time. This gives you flexibility at all times and conserves important resources.
Drive shaft designs also available in special immersion depths of 500 - 2000 mm
Examples of media: viscous mineral oils, resins, emulsions, paints and many other thick substances.
Properties & advantages
Uniform volume flow
Quick and easy cleaning
Gentle, low-pulsation product conveyance
Smooth running and low wear
Large selection of robust and powerful drive motors
25 l/min.
Mechanical seal: (GLRD)
PTFE stator
Progressing cavity pump B70V-D Industry
for Three-phase motors
Description:
The Eccentric screw pumps B70V-D 25.1 in the Industry version is a powerful positive displacement pump for medium, high viscosity and viscous media up to the limits of flowability. Depending on the application, various three-phase AC and Compressed air motors are available, which you can combine with the Pump tube at any time. This gives you flexibility at all times and saves important resources.
Drive shaft designs also available in special immersion depths of 500 - 2000 mm
Examples of media: viscous mineral oils, resins, emulsions, paints and many other thick substances.
Properties & advantages
Uniform volume flow
Quick and easy cleaning
Gentle, low-pulsation product conveyance
Smooth running and low wear
Large selection of robust and powerful drive motors
approved in accordance with ATEX Directive 2014/34/EU, category 1/2
Accessory Items
25 l/min.
Mechanical seal: (GLRD)
PTFE stator
Hose connection
for Three-phase motors
Description:
For connection of delivery hoses to the B70V-D Pump tube.
Nominal diameters: DN 25 / DN 32 / DN 38
Properties & advantages
Connection thread: 1 1/2"
Material: stainless steel
25 l/min.
Mechanical seal: (GLRD)
PTFE stator
Mounting flange
for Three-phase motors
Description:
The installation flange is attached to the B70V Pump and a counterflange. The flange is welded directly to the Pump tube.
Material: Stainless steel (1.4571)
Properties & advantages
DN 80 / PN 10
according to the standard: DIN 2576
Pumping unit diameter Ø 52-54 mm
25 l/min.
Mechanical seal: (GLRD)
PTFE stator
Container lid
for Three-phase motors
Description:
The container lid is used to hold a drum adapter and is suitable for the IBC container
Nominal diameter: 150 and 225
Properties & advantages
Material: PE
Thread: 2" IG
25 l/min.
Mechanical seal: (GLRD)
PTFE stator
Balancer
for Three-phase motors
Description:
The balancer makes it easier to insert and move the Pump in the Tank and has an infinitely variable load adjustment. It is equipped with a special fall protection in the event of a spring breakage and offers maximum safety for long-term applications.
For Drum pumps or Eccentric screw pumps
Properties & advantages
Load bearing capacity from 10 - 30 kg
Cable pull up to 2 m
25 l/min.
Mechanical seal: (GLRD)
PTFE stator
Barrel adapter
for Three-phase motors
Description:
The drum adapter is required for fastening the Pump in the drum opening. It prevents the Pump from tipping over when the drum is empty.
Properties & advantages
Material: PP / St 37
25 l/min.
Mechanical seal: (GLRD)
PTFE stator
Clamping device
for Three-phase motors
Description:
The clamping device is for fastening the Eccentric screw pump B70V in open and thick-walled drums and tanks.
Suitable for a wide range of pumping station diameters
Properties & advantages
Material: stainless steel
25 l/min.
Mechanical seal: (GLRD)
PTFE stator
IBC traverse
for Three-phase motors
Description:
The IBC traverse is used to safely remove and install the Pump tubes or the double diaphragm pump.
Suitable for Drum pumps, Eccentric screw pumps B70 and Diaphragm pumps
Includes transport straps for lifting vehicles and tensioning hooks for fixing to the container
Properties & advantages
Compatible with all standard IBC containers
Material: stainless steel
Clamping hook: galvanised steel
for Drum pumps / B70 Version: plastic guide sleeve with Ø 55 mm
25 l/min.
Mechanical seal: (GLRD)
PTFE stator
Dispensing nozzle Niro
for Three-phase motors
Description:
For dispensing and transferring liquids in the Foodstuffs and Pharmaceutical Industry as well as flammable and highly flammable liquids. The housing and the valve plug of the dispensing nozzle are made of stainless steel (1.4571) and are equipped with a protective bracket and a swivel coupling.
EPDM seal is available on request at an extra charge
Connection: external thread G 1 1/4"
Properties & advantages
For pumping in potentially explosive environments
Simple adjustment of the volume flow
Easy to operate
Safe filling or transferring of the respective liquid
Rotary coupling ensures tightness at high pressure