Drum pumps Lutz B2 Vario PVDF
Skip image gallery
Elektrisch
Fasspumpe
*Illustration may differ from the actual product
Available immediately, delivery time: Available from stock (approx. 5 working days)
Product number:
0201-581
Product information "Drum pumps Lutz B2 Vario PVDF"
Description:
The B2 Vario pump set is suitable for low-viscosity acids, alkalis and chemicals. The set is suitable for dispensing small containers such as canisters, hobbocks and drums. The Pump is flexible at all times and thus conserves important resources.
- Infinitely variable Speed controller for transferring and filling small quantities
Properties & advantages
- Sealless version (DL) conditionally dry-run safe
- Infinitely variable
- powerful Motor with improved service life.
- Easy to service and dismantle
| Bearings (Material): | ETFE / PTFE |
|---|---|
| Delivery head (up to max. m wc)*.: | 7 |
| Density (up to kg/dm³): | 1,3 |
| Design/Equipment: | with Speed controller |
| Drive shaft (Material): | Hastelloy C (2.4610) |
| Drive type: | Electric |
| Flow rate (up to max. g/min)*.: | 19.81 |
| Frequency (Hz): | 50 |
| Immersion depth (inch): | from 19" (500 mm) |
| Immersion tube diameter (max. inch): | 32 |
| Impeller (Material): | ETFE (ethylene tetrafluoroethylene copolymer) |
| Liquid temperature (max. °C): | 90 (194,0 °F) |
| Mechanical seal (Material): | No Seals in contact with the medium |
| Power (W): | 200 |
| Protection class: | IP24 |
| Pump tube material (Material): | PVDF (polyvinylidene fluoride) |
| Static seal (Material): | No Seals in contact with the medium |
| Suitable fluids: | Naphthalene, Nitric acid, Perchloric acid, Sodium hypochlorite |
| Thread (inch) outside: | 1" |
| Type of impeller / Drive type: | Axial-flow rotor |
| Type of seal: | Sealless (SL) |
| Viscosity (up to max. mPas)*.: | 300 |
| Voltage (V): | 230 |
Are there battery-powered drum pumps for hazardous areas?
Lutz does not currently offer any battery-powered drum pumps with ATEX approval for hazardous areas. Only fully explosion-proof drive systems may be used for flammable media such as ethanol.
The reason for this is safety requirements. Batteries are potential ignition sources because they can generate heat or sparks in the event of a fault. In hazardous areas, however, the entire system consisting of the motor, energy source, and electrical wiring must be ATEX-compliant. Individual protected components are not sufficient.
As soon as the application is located in a potentially explosive area, the use of an explosion-proof drum pump is mandatory. This applies regardless of the quantity being pumped or whether the application is stationary or takes place at different locations.
For such applications, we recommend using a drum pump with:
- ATEX-certified electric motor or compressed air motor
- Suitable grounding to prevent electrostatic charging
- Media-resistant materials for ethanol
If a mobile solution is to be implemented, it can be checked whether the power supply can be positioned outside the Ex zone or whether a compressed air-powered version is appropriate.
The specific design should always be based on the zone classification, operational safety requirements, and the desired delivery rate.
Skip product gallery
Similar Items
Elektrisch
Fasspumpe
Drum pump Lutz B2 Vario PP
For larger delivery heads
Description:
The B2 Vario Drum pump is suitable for low-viscosity, aqueous to slightly viscous media. The set is suitable for removing small containers such as canisters, hobbocks and drums. The Pump is flexible at all times and thus conserves important resources.
Infinitely variable Speed controller for transferring and filling small quantities
Properties & advantages
Sealless version (DL) conditionally dry-run safe
Infinitely variable
Powerful motor with improved service life
Easy to service and dismantle
Elektrisch
Fasspumpe
Drum pumps Lutz B2 Vario Niro
For larger delivery heads
Description:
The B2 Vario Drum pump is suitable for low-viscosity, aqueous to slightly viscous media. The set is suitable for removing small containers such as canisters, hobbocks and drums. The Pump is flexible at all times and thus conserves important resources.
Infinitely variable Speed controller for transferring and filling small quantities
Properties & advantages
Sealless version (DL) conditionally dry-run safe
Infinitely variable
powerful Motor with improved service life.
Easy to service and dismantle
Skip product gallery
Accessory Items
Elektrisch
Fasspumpe
Suspension device
For larger delivery heads
Description:
The suspension device is used to safely store the B2 Vario drum and laboratory pump. This protects the pumps and increases their utility value at the same time.
Precisely adapted to the Drum pump B2 Vario
Properties & advantages
Increases the utility value
Protection against the Pump tubes or Drum pump falling down
Elektrisch
Fasspumpe
Barrel adapter
For larger delivery heads
Description:
The drum adapter is for fastening the Pump or Pump tubes in the drum opening. It prevents the Pump from tipping over when the drum is empty.
Material: PP / ST37 / steel, galvanised / PE
Properties & advantages
Stabilisation of the Pump tube
External thread 2", 56 x 4 and 70 x6
Elektrisch
Fasspumpe
Barrel adapter PP
For larger delivery heads
Description:
The drum adapter stabilises the Pump tube or Pump in the drum or Container opening. It prevents the Pump from tipping over in the empty drum.
Detailed information on the various Container openings is available on request
for the Pump tube B2
Properties & advantages
Stabilisation of the Drum pump
Protection against the Pump tube falling out
Elektrisch
Fasspumpe
TR3 Flow meter (PVDF)
For larger delivery heads
Description:
Easy to operate, compact design and quick to install on all drum and container pumps: the Lutz TR3 flow meter in PP or PVDF. A handy meter that you can "count on" in any situation. The symmetrical measuring chamber allows it to be used for all flow directions and measures low-viscosity, non-flammable media precisely, quickly and, above all, efficiently.
PVDF for highly aggressive liquids
Examples of media: Chlorine bleach, nitric acid, sulphuric acid, ...
Two 1.5 V batteries (AAA) replaceable
Properties & advantages
Measurement according to the turbine wheel principle
Displays the partial and total quantity
Variable display position: mobile
Mobile on a Drum pump or with nozzle connection
Measuring range (min. g/min) from 5 l/min - 120 l/min
Simple battery change
Elektrisch
Fasspumpe
Foot strainer PP
For larger delivery heads
Description:
For attaching to the pump foot. This keeps coarse impurities away from the rotating parts, reducing wear and tear on the Pump.
Is plugged onto the pump foot
Properties & advantages
Protects important parts from contamination
Reduces wear on the Pump
Elektrisch
Fasspumpe
Dispensing nozzle PVDF
For larger delivery heads
Description:
For filling and decanting concentrated acids and alkalis. The housing and the valve plug of the dispensing nozzle are made of polyvinylidene fluoride (PVDF) and are equipped with a protective bracket and two outlet spouts(Ø 23 mm and Ø 12mm).each. The dispensing nozzle is sealed using an FPM seal.
Seals FFPM or FEP / FPM are available on request at extra cost
Connection: external thread G 1 1/4"
Optionally available as a variant with a button for direct operation of the relay module (no communication module required)
Properties & advantages
Simple adjustment of the volume flow
Easy to operate
Safe filling or decanting of the respective liquid
Elektrisch
Fasspumpe
Set accessories B2 Vario
For larger delivery heads
Description:
The set accessories are for low-viscosity, aqueous to slightly viscous media. The set is suitable for the Pump B2 Vario in the PP and stainless steel version.
Also available in special lengths on request
Elektrisch
Fasspumpe
IBC traverse
For larger delivery heads
Description:
The IBC traverse is used to safely remove and install the Pump tubes or the double diaphragm pump.
Suitable for Drum pumps, Eccentric screw pumps B70 and Diaphragm pumps
Includes transport straps for lifting vehicles and tensioning hooks for fixing to the container
Properties & advantages
Compatible with all standard IBC containers
Material: stainless steel
Clamping hook: galvanised steel
for Drum pumps / B70 Version: plastic guide sleeve with Ø 55 mm