Double diaphragm pump DMP model 3/8" plastic
Plastic
PP
Compressed air
*Abbildung kann vom tatsächlichen Produkt abweichen
Product number:
5210-040
Product information "Double diaphragm pump DMP model 3/8" plastic"
Description:
The double diaphragm pump is suitable for pumping small quantities, in the laboratory and for occasional filling operations
- Typical applications: Chemical circulation and feeding, liquids with solid particles such as paints and varnishes, electroplating liquids, etc.
- integrated silencer up to model size DMP 1"
Properties & advantages
- High hydraulic power
- Maintenance-optimised design and easy installation
- Self-priming (even when dry)
- Reinforced elastomers and thermoplastic diaphragm
- Absolutely oil-free
- blockage-free operation
| Air inlet (Ø mm): | 6 |
|---|---|
| Air pressure (max. bar): | 8 |
| Air pressure start-up (min. bar): | 2 |
| Centre block (material): | Polypropylene reinforced with carbon fibre (PP) |
| Check ball (Material): | NBR (acrylonitrile butadiene rubber) |
| Check valve seat (Material): | PP (polypropylene) |
| Connection: | Thread |
| Delivery head (up to max. m wc)*.: | 50 |
| Diaphragms (Material): | NBR (acrylonitrile butadiene rubber) |
| Displacement per chamber (in cm³): | 35 |
| Displacement per cycle (in cm³): | 70 |
| Double diaphragm pumps (material): | Plastic |
| Explosion protection: | No |
| Flow rate (up to max. g/min)*.: | 6.87 |
| Housing (Material): | Polypropylen glasfaserverstärkt (PP) |
| Liquid temperature (max. °C): | 60 (140,0 °F) |
| Pressure joint (inch) inside: | 3/8" |
| Seals (Material): | NBR (acrylonitrile butadiene rubber) |
| Size (Inches): | 3/8" |
| Solids (max. ø mm): | 3 |
| Sound pressure level dB(A): | 72 |
| Suction head dry (up to max. mwc*): | 4 |
| Suction joint (inch) inside: | 3/8" |
| Type: | DMP 3/8" PPB PP/NBR |
| Viscosity (up to max. mPas)*.: | 3500 |
Similar Items
Plastic
PP
Compressed air
Double diaphragm pump DMP model 1/2" plastic
for small systems and in laboratories
Description:
The double diaphragm pump is suitable for industrial applications as well as for drum, IBC and tank emptying.
Typical applications: 200 litre drums, paint circulation and feeding, feeding of chemicals, solvents, acids and liquid soap
Integrated silencer up to model size DMP 1"
highly resistant TFM (PTFE) diaphragms (modified PTFE)
Properties & advantages
High hydraulic power
Maintenance-optimised design and easy installation
Self-priming (even when dry)
Reinforced elastomers and thermoplastic diaphragm
Absolutely oil-free
blockage-free operation
Plastic
PP
Compressed air
Double diaphragm pump DMP model 1/4" plastic
for small systems and in laboratories
Description:
The double diaphragm pump is suitable for pumping small quantities, in the laboratory and for occasional filling operations
Typical applications: Chemical circulation and feeding, liquids with solid particles such as paints and varnishes, electroplating liquids, etc.
integrated silencer up to model size DMP 1"
highly resistant TFM (PTFE) diaphragms (modified PTFE)
Properties & advantages
High hydraulic power
Maintenance-optimised design and easy installation
Self-priming (even when dry)
Reinforced elastomers and thermoplastic diaphragm
Absolutely oil-free
blockage-free operation
Plastic
PP
Compressed air
Double diaphragm pump DMP model 3/8" plastic
for small systems and in laboratories
Description:
The double diaphragm pump is suitable for pumping small quantities, in the laboratory and for occasional filling operations
Typical applications: Chemical circulation and feeding, liquids with solid particles such as paints and varnishes, electroplating liquids, etc.
integrated silencer up to model size DMP 1"
highly resistant TFM (PTFE) diaphragms (modified PTFE)
Properties & advantages
High hydraulic power
Maintenance-optimised design and easy installation
Self-priming (even when dry)
Reinforced elastomers and thermoplastic diaphragm
Absolutely oil-free
blockage-free operation
Accessory Items
Plastic
PP
Compressed air
IBC traverse
for small systems and in laboratories
Description:
The IBC traverse is used to safely remove and install the Pump tubes or the double diaphragm pump.
Suitable for Drum pumps, Eccentric screw pumps B70 and Diaphragm pumps
Includes transport straps for lifting vehicles and tensioning hooks for fixing to the container
Properties & advantages
Compatible with all standard IBC containers
Material: stainless steel
Clamping hook: galvanised steel
for Drum pumps / B70 Version: plastic guide sleeve with Ø 55 mm
Plastic
PP
Compressed air
Screw-in fitting
for small systems and in laboratories
Description:
The screw-in fitting enables the direct connection of hoses to the pressure or suction connection of the double diaphragm pump.
Material: PP / PVDF
Properties & advantages
Connection type: DN 8 x 1/4" AG / DN 8 x 3/8" AG
Plastic
PP
Compressed air
Air connection set
for small systems and in laboratories
Description:
Air connection set with adapter for coupling (NW 7.2) or compressed air hose with an internal diameter of 9 mm