Double diaphragm pump DMP model 1" metal
Explosion protection
Metal
Aluminium
*Abbildung kann vom tatsächlichen Produkt abweichen
Product number:
5232-140
Product information "Double diaphragm pump DMP model 1" metal"
Description:
The double diaphragm pump is suitable for industrial applications as well as for drum, IBC and tank emptying.
- Typical applications: Transfer from drums and tanks, transfer of corrosive solutions and chemicals
- Integrated silencer up to model size DMP 1"
- also available in the Pure version (5234-410)
Properties & advantages
- High hydraulic power
- Maintenance-optimised design and easy installation
- Self-priming (even when dry)
- Absolutely oil-free
- Blockage-free operation
- Pumps explosion-proof in accordance with the ATEX directive (explosion protection)
| Air inlet (inch) inside: | 3/8" |
|---|---|
| Air pressure (max. bar): | 8 |
| Air pressure start-up (min. bar): | 2 |
| Centre block (material): | Polypropylene reinforced with carbon fibre (PP) |
| Certification: | ATEX Directive (ATEX Directive 2014/34/EU) |
| Check ball (Material): | NBR (acrylonitrile butadiene rubber) |
| Check valve seat (Material): | Aluminium |
| Connection: | Thread |
| Delivery head (up to max. m wc)*.: | 50 |
| Diaphragms (Material): | NBR (acrylonitrile butadiene rubber) |
| Displacement per chamber (in cm³): | 220 |
| Displacement per cycle (in cm³): | 440 |
| Double diaphragm pumps (material): | Metal |
| Explosion protection: | Yes |
| Flow rate (up to max. g/min)*.: | 46.23 |
| Housing (Material): | Aluminum |
| Liquid temperature (max. °C): | 100 (212,0 °F) |
| Pressure joint (inch) inside: | 1" |
| Seals (Material): | NBR (acrylonitrile butadiene rubber) |
| Size (Inches): | 1" |
| Solids (max. ø mm): | 6,0 |
| Sound pressure level dB(A): | 80 |
| Suction head dry (up to max. mwc*): | 4,5 |
| Suction joint (inch) inside: | 1" |
| Type: | DMP 1" ALB aluminium/NBR |
| Viscosity (up to max. mPas)*.: | 10000 |
Accessory Items
Explosion protection
Metal
Aluminium
Screw-in hose nozzle
for drum, IBC and tank emptying
Description:
The screw-in hose nozzle enables the direct connection of hoses to the pressure or suction nozzle of the double diaphragm pump.
Material: PP / stainless steel
Properties & advantages
Connection type: DN 25 x 1" AG
Explosion protection
Metal
Aluminium
Vibration damper set
for drum, IBC and tank emptying
Description:
The vibration damper set ensures the damping of vibrations, shocks and impacts. The set consists of 4 vibration dampers including fastening material.
M6 / M8 thread
Properties & advantages
M6 / M8 thread standard in accordance with DIN 13-1
Explosion protection
Metal
Aluminium
Pulsation dampener
for drum, IBC and tank emptying
Description:
Pulsation dampeners are tanks filled with a gas cushion. A diaphragm separates the gas cushion from the system fluid. Pulsation dampers store and discharge part of the stroke volume in the stroke rhythm of the double diaphragm pump, whereby the gas cushion is compressed or decompressed accordingly. This makes the pulsating flow rate of the Pump almost uniform.
Automatic air control / adjustable air control (FPM version)
Material: PE / PTFE / stainless steel
Properties & advantages
Operating pressure: max. 8 bar / 10 bar (FPM version)
Ensure almost uniform volume flow, which increases the accuracy of flow meters
Compensation of pressure surges (water hammer) protects installed fittings
Prevents pipe vibrations that cause material fatigue and pipe breakages
Explosion protection
Metal
Aluminium
IBC traverse
for drum, IBC and tank emptying
Description:
The IBC traverse is used to safely remove and install the Pump tubes or the double diaphragm pump.
Suitable for Drum pumps, Eccentric screw pumps B70 and Diaphragm pumps
Includes transport straps for lifting vehicles and tensioning hooks for fixing to the container
Properties & advantages
Compatible with all standard IBC containers
Material: stainless steel
Clamping hook: galvanised steel
for Drum pumps / B70 Version: plastic guide sleeve with Ø 55 mm
Explosion protection
Metal
Aluminium
Hose connection
for drum, IBC and tank emptying
Description:
The hose connection connects the delivery hoses to the Pump tubes, the double diaphragm pumps or the dispensing nozzle. When using a double diaphragm pump, a suitable reducing nipple must be used in addition to the hose connection
Special connections are available on request
Properties & advantages
Nominal diameters: DN 13 / DN 19 / DN 25 / DN 32
Material: PP / PVDF / aluminium / stainless steel / HC
Explosion protection
Metal
Aluminium
Suction pipe
for drum, IBC and tank emptying
Description:
The suction tube is required to be able to convey or suck in highly chemical media without the outer layer being attacked as when immersing a hose.
Material: Stainless steel (1.4571)
Properties & advantages
Outer tube diameter 41 mm
Pipe length from 1000 - 1200 mm
Connections: 1 " AG and 1 1/4" AG
Explosion protection
Metal
Aluminium
Vibration damper set
for drum, IBC and tank emptying
Description:
The vibration damper set ensures the damping of vibrations, shocks and impacts. The set consists of 4 vibration dampers including fastening material.
Thread M6 / M8 / M 12
Properties & advantages
M6 / M8 / M 12 thread standard in accordance with DIN 13-1
Explosion protection
Metal
Aluminium
Potential equalisation cable
for drum, IBC and tank emptying
Description:
The potential equalisation cable is used for the electrically conductive connection between the Explosion proof Pump and Tank and has the function of earthing and potential equalisation.
2 m with fastening clip
Properties & advantages
Earthing and potential equalisation function
Similar Items
Explosion protection
Metal
Aluminium
Double diaphragm pump DMP model 1" plastic
for drum, IBC and tank emptying
Description:
The double diaphragm pump is suitable for industrial applications as well as for drum, IBC and tank emptying.
Typical applications: Transfer from drums and tanks, transfer of corrosive solutions and chemicals
Integrated silencer up to model size DMP 1"
highly resistant TFM (PTFE) diaphragms (modified PTFE)
Properties & advantages
High hydraulic power
Maintenance-optimised design and easy installation
Self-priming (even when dry)
Reinforced elastomers and thermoplastic diaphragm
Absolutely oil-free
blockage-free operation
Explosion protection
Metal
Aluminium
Double diaphragm pump DMP model 1" PURE
for drum, IBC and tank emptying
Description:
The double diaphragm pump is suitable for the Foodstuffs and pharmaceutical sectors as well as for emptying drums, IBCs and tanks
Typical applications: liquid foodstuffs and luxury foods, active pharmaceutical ingredients and cosmetic products
Integrated silencer up to model size DMP 1"
FDA-compliant
Properties & advantages
High hydraulic power
Maintenance-optimised design and easy installation
Self-priming (even when dry)
Ice-free air system
Blockage-free operation
Connections: suitable for foodstuffs