Double diaphragm pump DMP model 1/2" mini plastic
Explosion protection
Plastic
PVDF
*Abbildung kann vom tatsächlichen Produkt abweichen
Available, delivery time: 2-3 weeks (approx. 10-15 working days)
Product number:
5271-110
Product information "Double diaphragm pump DMP model 1/2" mini plastic"
Description:
The double diaphragm pump is suitable for industrial applications as well as for drum, IBC and tank emptying.
- Typical applications: 200 litre drums, paint circulation and feeding, feeding of chemicals, solvents, acids and liquid soap
- Integrated silencer up to model size DMP 1"
- highly resistant TFM (PTFE) diaphragms (modified PTFE)
Properties & advantages
- High hydraulic power
- Maintenance-optimised design and easy installation
- Self-priming (even when dry)
- Reinforced elastomers and thermoplastic diaphragm
- Absolutely oil-free
- blockage-free operation
| Air inlet (Ø mm): | 6 |
|---|---|
| Air pressure (max. bar): | 8 |
| Air pressure start-up (min. bar): | 2 |
| Centre block (material): | Polypropylene reinforced with carbon fibre (PP) |
| Certification: | ATEX Directive (ATEX Directive 2014/34/EU) |
| Check ball (Material): | PTFE (polytetrafluoroethylene) |
| Check valve seat (Material): | PVDF (polyvinylidene fluoride) |
| Connection: | Thread |
| Delivery head (up to max. m wc)*.: | 80 |
| Diaphragms (Material): | TPV (EPDM-PP) + TFM (PTFE) (EPDM/PP compound + modified polytetrafluoroethylene) |
| Displacement per chamber (in cm³): | 35 |
| Displacement per cycle (in cm³): | 70 |
| Double diaphragm pumps (material): | Plastic |
| Explosion protection: | Yes |
| Flow rate (up to max. g/min)*.: | 13.74 |
| Housing (Material): | Polivinylidenfluorid kohlefaserverstärkt (PVDF) |
| Liquid temperature (max. °C): | 90 (194,0 °F) |
| Pressure joint (inch) inside: | 1/2" |
| Seals (Material): | PTFE (polytetrafluoroethylene) |
| Size (Inches): | 1/2" mini |
| Solids (max. ø mm): | 3 |
| Sound pressure level dB(A): | 72 |
| Suction head dry (up to max. mwc*): | 4 |
| Suction joint (inch) inside: | 1/2" |
| Type: | DMP 1/2" mini KNTC Ex PVDF/PTFE |
| Viscosity (up to max. mPas)*.: | 3500 |
Similar Items
Explosion protection
Plastic
PVDF
Double diaphragm pump DMP model 1/2" plastic
for drum, IBC and tank emptying
Description:
The double diaphragm pump is suitable for industrial applications as well as for drum, IBC and tank emptying.
Typical applications: 200 litre drums, paint circulation and feeding, feeding of chemicals, solvents, acids and liquid soap
Integrated silencer up to model size DMP 1"
highly resistant TFM (PTFE) diaphragms (modified PTFE)
Properties & advantages
High hydraulic power
Maintenance-optimised design and easy installation
Self-priming (even when dry)
Reinforced elastomers and thermoplastic diaphragm
Absolutely oil-free
blockage-free operation
Accessory Items
Explosion protection
Plastic
PVDF
Screw-in hose nozzle
for drum, IBC and tank emptying
Description:
The screw-in hose nozzle enables the direct connection of hoses to the pressure or suction nozzle of the double diaphragm pump.
Material: PP
Properties & advantages
Connection type: DN 12 x 1/2" AG / DN 20 x 1/2" AG
Explosion protection
Plastic
PVDF
Air connection set
for drum, IBC and tank emptying
Description:
Air connection set with adapter for coupling (NW 7.2) or compressed air hose with an internal diameter of 9 mm
Explosion protection
Plastic
PVDF
Potential equalisation cable
for drum, IBC and tank emptying
Description:
The potential equalisation cable is used for the electrically conductive connection between the Explosion proof Pump and Tank and has the function of earthing and potential equalisation.
2 m with fastening clip
Properties & advantages
Earthing and potential equalisation function
Explosion protection
Plastic
PVDF
IBC traverse
for drum, IBC and tank emptying
Description:
The IBC traverse is used to safely remove and install the Pump tubes or the double diaphragm pump.
Suitable for Drum pumps, Eccentric screw pumps B70 and Diaphragm pumps
Includes transport straps for lifting vehicles and tensioning hooks for fixing to the container
Properties & advantages
Compatible with all standard IBC containers
Material: stainless steel
Clamping hook: galvanised steel
for Drum pumps / B70 Version: plastic guide sleeve with Ø 55 mm