Double diaphragm pump DMP model 1/2" mini PET Pure
Plastic
Plastic
PE
*Abbildung kann vom tatsächlichen Produkt abweichen
Delivery time on request
Product number:
5278-000
Product information "Double diaphragm pump DMP model 1/2" mini PET Pure"
Description:
The double diaphragm pump is suitable for the Foodstuffs and pharmaceutical sectors as well as for drum, IBC and tank emptying.
- Typical applications: liquid foodstuffs and luxury foods, active pharmaceutical ingredients and cosmetic products
- Highly resistant PE material with low coefficient of friction
- FDA-compliant
Properties & advantages
- High hydraulic power
- Maintenance-optimised design and easy installation
- Self-priming (even when dry)
- Ice-free air system
- Blockage-free operation
- Connections: suitable for foodstuffs
| Air inlet (Ø mm): | 6 |
|---|---|
| Air pressure (max. bar): | 8 |
| Air pressure start-up (min. bar): | 2 |
| Centre block (material): | Polypropylene glass fibre reinforced (PP) |
| Certification: | FDA-compliant |
| Check ball (Material): | PTFE (polytetrafluoroethylene) |
| Check valve seat (Material): | PE (polyethylene) |
| Connection: | Thread |
| Delivery head (up to max. m wc)*.: | 80 |
| Diaphragms (Material): | PTFE (polytetrafluoroethylene) |
| Displacement per chamber (in cm³): | 35 |
| Displacement per cycle (in cm³): | 70 |
| Double diaphragm pumps (material): | Plastic |
| Flow rate (up to max. g/min)*.: | 13.74 |
| Housing (Material): | PE (polyethylene) |
| Liquid temperature (max. °C): | 60 (140,0 °F) |
| Pressure joint (inch) inside: | 1/2" |
| Seals (Material): | PTFE (polytetrafluoroethylene) |
| Size (Inches): | 1/2" mini |
| Solids (max. ø mm): | 3 |
| Sound pressure level dB(A): | 75 |
| Suction head dry (up to max. mwc*): | 4 |
| Suction joint (inch) inside: | 1/2" |
| Type: | DMP 1/2" mini PET PURE PE/PTFE |
| Viscosity (up to max. mPas)*.: | 7500 |
Accessory Items
Plastic
Plastic
PE
IBC traverse
for drum, IBC and tank emptying
Description:
The IBC traverse is used to safely remove and install the Pump tubes or the double diaphragm pump.
Suitable for Drum pumps, Eccentric screw pumps B70 and Diaphragm pumps
Includes transport straps for lifting vehicles and tensioning hooks for fixing to the container
Properties & advantages
Compatible with all standard IBC containers
Material: stainless steel
Clamping hook: galvanised steel
for Drum pumps / B70 Version: plastic guide sleeve with Ø 55 mm
Plastic
Plastic
PE
Screw-in fitting
for drum, IBC and tank emptying
Description:
The screw-in fitting enables the direct connection of hoses to the pressure or suction connection of the double diaphragm pump.
Material: PP / PVDF
Properties & advantages
Connection type: DN 8 x 1/4" AG / DN 8 x 3/8" AG
Plastic
Plastic
PE
Screw-in hose nozzle
for drum, IBC and tank emptying
Description:
The screw-in hose nozzle enables the direct connection of hoses to the pressure or suction nozzle of the double diaphragm pump.
Material: PP
Properties & advantages
Connection type: DN 8 x 1/4" AG / DN 12 x 1/4" AG
Plastic
Plastic
PE
Air connection set
for drum, IBC and tank emptying
Description:
Air connection set with adapter for coupling (NW 7.2) or compressed air hose with an internal diameter of 9 mm
Similar Items
Plastic
Plastic
PE
Double diaphragm pump DMP model 1/4" plastic
for drum, IBC and tank emptying
Description:
The double diaphragm pump is suitable for pumping small quantities, in the laboratory and for occasional filling operations
Typical applications: Chemical circulation and feeding, liquids with solid particles such as paints and varnishes, electroplating liquids, etc.
integrated silencer up to model size DMP 1"
highly resistant TFM (PTFE) diaphragms (modified PTFE)
Properties & advantages
High hydraulic power
Maintenance-optimised design and easy installation
Self-priming (even when dry)
Reinforced elastomers and thermoplastic diaphragm
Absolutely oil-free
blockage-free operation
Plastic
Plastic
PE
Double diaphragm pump DMP model 1/4" mini plastic
for drum, IBC and tank emptying
Description:
The double diaphragm pump is suitable for pumping small quantities, in the laboratory and for occasional filling operations
Typical applications: Chemical circulation and feeding, liquids with solid particles such as paints and varnishes, electroplating liquids, etc.
integrated silencer up to model size DMP 1"
highly resistant TFM (PTFE) diaphragms (modified PTFE)
Properties & advantages
High hydraulic power
Maintenance-optimised design and easy installation
Self-priming (even when dry)
Reinforced elastomers and thermoplastic diaphragm
Absolutely oil-free
blockage-free operation