Double diaphragm pump DMP model 1 1/2" PEE PURE
Foodstuffs
Plastic
PE
*Abbildung kann vom tatsächlichen Produkt abweichen
Available, delivery time: on request
Product number:
5248-030
Product information "Double diaphragm pump DMP model 1 1/2" PEE PURE"
Description:
The double diaphragm pump is suitable for the Foodstuffs and pharmaceutical sectors as well as large flow rates and higher Viscosities.
- Typical applications: liquid food and luxury foods, active pharmaceutical ingredients and cosmetic products
- Highly resistant PE material with low coefficient of friction
- FDA-compliant
Properties & advantages
- High hydraulic power
- Maintenance-optimised design and easy installation
- Self-priming (even when dry)
- Ice-free air system
- Blockage-free operation
- Connections: suitable for foodstuffs
| Air inlet (inch) inside: | 1/2" |
|---|---|
| Air pressure (max. bar): | 8 |
| Air pressure start-up (min. bar): | 2 |
| Centre block (material): | Polypropylene glass fibre reinforced (PP) |
| Certification: | FDA-compliant |
| Check ball (Material): | PTFE (polytetrafluoroethylene) |
| Check valve seat (Material): | PE (polyethylene) |
| Connection: | Flange |
| Delivery head (up to max. m wc)*.: | 80 |
| Diaphragms (Material): | PTFE (polytetrafluoroethylene) |
| Displacement per chamber (in cm³): | 670 |
| Displacement per cycle (in cm³): | 1340 |
| Double diaphragm pumps (material): | Plastic |
| Flow rate (up to max. g/min)*.: | 97.74 |
| Housing (Material): | PE (polyethylene) |
| Liquid temperature (max. °C): | 60 (140,0 °F) |
| Pressure joint (DN): | 40 |
| Seals (Material): | EPDM (ethylene propylene diene rubber) |
| Size (Inches): | 1 1/2" |
| Solids (max. ø mm): | 7 |
| Sound pressure level dB(A): | 80 |
| Suction head dry (up to max. mwc*): | 4,5 |
| Suction inlet (DN) : | 40 |
| Type: | DMP 1 1/2" PEE Pure PE/EPDM |
| Viscosity (up to max. mPas)*.: | 30000 |
Accessory Items
Foodstuffs
Plastic
PE
Vibration damper set
for the Foodstuffs and pharmaceutical sectors
Description:
The vibration damper set ensures the damping of vibrations, shocks and impacts. The set consists of 4 vibration dampers including fastening material.
Thread M6 / M8 / M 12
Properties & advantages
M6 / M8 / M 12 thread standard in accordance with DIN 13-1
Foodstuffs
Plastic
PE
Hose integration
for the Foodstuffs and pharmaceutical sectors
Description:
For connecting conductive delivery hoses to the Pump, nozzle/outlet elbow or Tri-Clamp fittings in potentially explosive atmospheres. The hose connection ensures a good conductive transition between the conductive hose and the pump/fitting. The ohmic resistance between the fittings must be less than106 ohms. The hose bonding consists of a hose connector, a clamping shell, a locking clip and a seal.
For Eccentric screw pumps
Properties & advantages
Material: stainless steel (1.4404)
Only suitable in conjunction with the universal chemical hose
in accordance with the DIN EN 12 115 standard
Foodstuffs
Plastic
PE
Hose connection
for the Foodstuffs and pharmaceutical sectors
Description:
The hose connection with Tri-Clamp is required for connecting the delivery hose to the Eccentric screw pumps B70, the discharge elbow or the Tri-Clamp fittings (consisting of hose nozzle, locking clamp and seal).
For Eccentric screw pumps
Properties & advantages
Material: stainless steel (1.4404)
For hoses with Nominal diameter (DN) 38 / DN 50
Foodstuffs
Plastic
PE
Potential equalisation cable
for the Foodstuffs and pharmaceutical sectors
Description:
The potential equalisation cable is used for the electrically conductive connection between the Explosion proof Pump and Tank and has the function of earthing and potential equalisation.
2 m with fastening clip
Properties & advantages
Earthing and potential equalisation function
Foodstuffs
Plastic
PE
IBC traverse
for the Foodstuffs and pharmaceutical sectors
Description:
The IBC traverse is used to safely remove and install the Pump tubes or the double diaphragm pump.
Suitable for Drum pumps, Eccentric screw pumps B70 and Diaphragm pumps
Includes transport straps for lifting vehicles and tensioning hooks for fixing to the container
Properties & advantages
Compatible with all standard IBC containers
Material: stainless steel
Clamping hook: galvanised steel
for Drum pumps / B70 Version: plastic guide sleeve with Ø 55 mm