Dispensing nozzle PVDF
FPM
*Abbildung kann vom tatsächlichen Produkt abweichen
Available, delivery time: Available from stock (approx. 5 working days)
Product number:
0204-390
Product information "Dispensing nozzle PVDF"
Description:
For filling and decanting concentrated acids and alkalis. The housing and the valve plug of the dispensing nozzle are made of polyvinylidene fluoride (PVDF) and are equipped with a protective bracket and two outlet spouts(Ø 23 mm and Ø 12mm).
each. The dispensing nozzle is sealed using an FPM seal.
- Seals FFPM or FEP / FPM are available on request at extra cost
- Connection: external thread G 1 1/4"
- Optionally available as a variant with a button for direct operation of the relay module (no communication module required)
Properties & advantages
- Simple adjustment of the volume flow
- Easy to operate
- Safe filling or decanting of the respective liquid
| Accessory Group: | Nozzles |
|---|---|
| Flow rate (up to max. g/min)*.: | 13.21 |
| Housing (Material): | Polivinylidenfluorid kohlefaserverstärkt (PVDF) |
| Liquid temperature (max. °C): | 80 (176,0 °F) |
| Operating pressure (max. bar): | 3 |
| Product group: | Drum pumps / Container pumps |
| Static seal (Material): | FPM (fluororubber) |
| Thread (inch) outside: | 1 1/4" |
| Type: | Dispensing nozzle PVDF |
| Viscosity (up to max. mPas)*.: | 760 |
Similar Items
FPM
Dispensing nozzle PP
for concentrated acids and alkalis
Description:
For filling and decanting neutral and aggressive liquids. The dispensing nozzle's housing and valve plug are made of polypropylene (PP). The dispensing nozzle is also equipped with a protective bracket and two outlet nozzles(Ø 23 mm and Ø 12 mm).
Connection: external thread G 1 1/4"
Properties & advantages
Simple adjustment of the volume flow
Safe filling or decanting of the respective liquid
Easy to operate
FPM
Automatic nozzle aluminium
for concentrated acids and alkalis
Description:
For filling and transferring flammable and highly flammable liquids. The body of the dispensing nozzle is made of aluminium and the internal parts are made of brass or the material POM. The dispensing nozzle is equipped with an automatic shut-off with a ball-tilt safety trigger and is sealed with a PTFE gasket.
Connection: external thread G 1"
Swivelling hose connection possible
Properties & advantages
Safe filling or decanting of the respective liquid
Easy to operate
Automatic switch-off
for pumping in potentially explosive environments
FPM
Aluminium nozzle
for concentrated acids and alkalis
Description:
For transferring and filling mineral oils, heating oil and diesel. The housing: and the valve plug of the nozzle are made of aluminium and are equipped with a swivel joint and a protective bracket.The nozzle is sealed with the aid of an NBR seal.
Connection:: Female thread G 1"
Properties & advantages
Safe filling or decanting of the respective liquid
Easy to operate
Swivel joint ensures tightness at high pressure