Dispensing nozzle PP
*Abbildung kann vom tatsächlichen Produkt abweichen
Product number:
0204-380
Product information "Dispensing nozzle PP"
Description:
For filling and decanting neutral and aggressive liquids. The dispensing nozzle's housing and valve plug are made of polypropylene (PP). The dispensing nozzle is also equipped with a protective bracket and two outlet nozzles(Ø 23 mm and Ø 12 mm).
- Connection: external thread G 1 1/4"
Properties & advantages
- Simple adjustment of the volume flow
- Safe filling or decanting of the respective liquid
- Easy to operate
| Accessory Group: | Nozzles |
|---|---|
| Flow rate (up to max. g/min)*.: | 13.21 |
| Housing (Material): | PP (polypropylene) |
| Liquid temperature (max. °C): | 50 (122,0 °F) |
| Operating pressure (max. bar): | 3 |
| Product group: | Drum pumps / Container pumps |
| Static seal (Material): | FPM (fluororubber) |
| Thread (inch) outside: | 1 1/4" |
| Type: | Dispensing nozzle PP |
| Viscosity (up to max. mPas)*.: | 760 |
Similar Items
Aluminium nozzle
for acids and alkalis
Description:
For transferring and filling mineral oils, heating oil and diesel. The housing: and the valve plug of the nozzle are made of aluminium and are equipped with a swivel joint and a protective bracket.The nozzle is sealed with the aid of an NBR seal.
Connection:: Female thread G 1"
Properties & advantages
Safe filling or decanting of the respective liquid
Easy to operate
Swivel joint ensures tightness at high pressure
Brass petrol nozzle
for acids and alkalis
Description:
For dispensing and transferring solvents and neutral liquids. The housing: and the valve plug of the dispensing nozzle are made of brass and are equipped with a swivel coupling and a protective bracket.The nozzle is sealed using a PTFE seal.
Connection: external thread G 1 1/4"
Properties & advantages
Safe filling or decanting of the respective liquid
Easy to operate
Rotary coupling ensures tightness at high pressure
For pumping in potentially explosive environments
Dispensing nozzle PVDF
for acids and alkalis
Description:
For filling and decanting concentrated acids and alkalis. The housing and the valve plug of the dispensing nozzle are made of polyvinylidene fluoride (PVDF) and are equipped with a protective bracket and two outlet spouts(Ø 23 mm and Ø 12mm).each. The dispensing nozzle is sealed using an FPM seal.
Seals FFPM or FEP / FPM are available on request at extra cost
Connection: external thread G 1 1/4"
Optionally available as a variant with a button for direct operation of the relay module (no communication module required)
Properties & advantages
Simple adjustment of the volume flow
Easy to operate
Safe filling or decanting of the respective liquid
Dispensing nozzle Niro in PURE version
for acids and alkalis
Description:
For dispensing and transferring liquids in the Foodstuffs and Pharmaceutical Industry as well as flammable and highly flammable liquids. The housing and the valve plug of the dispensing nozzle are made of stainless steel (##########_0__) and are equipped with a protective bracket and a swivel coupling.
Connection: Tri-Clamp DN32
Properties & advantages
For pumping in potentially explosive environments
Simple adjustment of the volume flow
Easy to operate
Safe filling or transferring of the respective liquid
Rotary coupling ensures tightness at high pressure
Automatic nozzle aluminium
for acids and alkalis
Description:
For filling and transferring flammable and highly flammable liquids. The body of the dispensing nozzle is made of aluminium and the internal parts are made of brass or the material POM. The dispensing nozzle is equipped with an automatic shut-off with a ball-tilt safety trigger and is sealed with a PTFE gasket.
Connection: external thread G 1"
Swivelling hose connection possible
Properties & advantages
Safe filling or decanting of the respective liquid
Easy to operate
Automatic switch-off
for pumping in potentially explosive environments
Dispensing nozzle Niro
for acids and alkalis
Description:
For dispensing and transferring liquids in the Foodstuffs and Pharmaceutical Industry as well as flammable and highly flammable liquids. The housing and the valve plug of the dispensing nozzle are made of stainless steel (1.4571) and are equipped with a protective bracket and a swivel coupling.
EPDM seal is available on request at an extra charge
Connection: external thread G 1 1/4"
Properties & advantages
For pumping in potentially explosive environments
Simple adjustment of the volume flow
Easy to operate
Safe filling or transferring of the respective liquid
Rotary coupling ensures tightness at high pressure