Centrifugal submersible pump B6
Stainless steel
21 m³/h
*Abbildung kann vom tatsächlichen Produkt abweichen
Available, delivery time: on request
Product number:
0118-067
Product information "Centrifugal submersible pump B6"
Description:
High Power, compact dimensions, low weight - the Lutz B6 has it all. The pump shaft is protected from possible "attack" by the pumped liquid by a shaft guide tube. Perfectly suited for pumping and draining neutral and aggressive liquids with low solids content.
- Also available in special immersion depths of 1000 - 3000 mm on request
- Designed according to the single-pipe principle
- Application examples: For pumping and circulating chemicals and solutions in surface treatment, chemical Industry and water treatment, etc.
Properties & advantages
- Wide range of possible applications
- No risk of leakage at the floor drain due to safe product removal
- Low wear and tear
- stationary installation possible via flange
- also for small Container openings
| Delivery head (up to max. m wc)*.: | 8 |
|---|---|
| Design/Equipment: | Vertical |
| Drive shaft (Material): | Stainless steel (1.4571) |
| Flow rate (up to max. m³/h)*.: | 21 |
| Immersion tube diameter (max. inch): | 160 |
| Impeller (Material): | ETFE (ethylene tetrafluoroethylene copolymer) |
| Liquid temperature (max. °C): | 100 (212,0 °F) |
| Mechanical seal (Material): | Ceramic,FPM,Stainless steel |
| Pump tube material (Material): | Niro (stainless steel) |
| Static seal (Material): | FPM (fluororubber) |
| Thread (inch) outside: | 2 1/4" |
| Type: | B6/15 Niro |
| Type of impeller / Drive type: | Radial-flow impeller |
| Type of seal: | mechanical seal (MS) |
| Viscosity (up to max. mPas)*.: | up to 4.000 cps (e.g. shampoo) |
Accessory Items
Stainless steel
21 m³/h
Hose connector
in the stainless steel version
Description:
The hose connector is required for the hose connection of the B6/PP and B6/Niro submersible centrifugal pump.
Stainless steel
21 m³/h
Outlet flange
in the stainless steel version
Description:
The outlet flange is used to connect individual components to the B6 submersible centrifugal pump.
Special connections are available on request
Properties & advantages
Material: PP / stainless steel
Nominal diameter (DN): DN 65
Diameter: 160 mm
Stainless steel
21 m³/h
Foot strainer for submersible centrifugal pump B6
in the stainless steel version
Description:
The foot strainer is used for the B6 submersible centrifugal pump. By attaching the strainer to the pump foot, coarse impurities can be kept away from important components such as the drive (impeller).
For attaching to the pump base
Properties & advantages
Material: PP / stainless steel
Hole diameter: 5 mm / 12 mm