Battery Drum pumps - B2 Battery Niro
Skip image gallery
Battery
Drum pump
*Illustration may differ from the actual product
Available immediately, delivery time: Available from stock (approx. 5 working days)
Product number:
0207-106
Product information "Battery Drum pumps - B2 Battery Niro"
Description:
The B2 Battery Drum pump is suitable for low-viscosity, aqueous to slightly viscous media. The set is suitable for removing small containers such as canisters or hobbocks. The Pump is flexible at all times and thus conserves important resources.
- Replaceable, powerful rechargeable battery with Li-Ion
- Battery life 35 min at maximum speed
- 1 battery charge empties approx. 12 x 200 litre containers
Properties & advantages
- BLDC Motor with high efficiency of up to 70%
- Infinitely variable
- Long battery life
- Automatic switch-off in case of overload
- Sophisticated quick-release fastener
| Bearings (Material): | ETFE / PTFE |
|---|---|
| Capacity (Ah): | 4 |
| Delivery head (up to max. m wc)*.: | 8 |
| Density (up to kg/dm³): | 1,6 |
| Drive shaft (Material): | Stainless steel (1.4571) |
| Drive type: | Battery |
| Flow rate (up to max. g/min)*.: | 21.13 |
| Immersion depth (inch): | up to 19" (500 mm) |
| Immersion tube diameter (max. inch): | 28 |
| Impeller (Material): | ETFE (ethylene tetrafluoroethylene copolymer) |
| Liquid temperature (max. °C): | 90 (194,0 °F) |
| Mechanical seal (Material): | No Seals in contact with the medium |
| Power (W): | 260 |
| Pump tube material (Material): | Niro (stainless steel) |
| Static seal (Material): | No Seals in contact with the medium |
| Suitable fluids: | Cold cleaner, Lubricant, Plasticiser |
| Thread (inch) outside: | 1" |
| Type of impeller / Drive type: | Axial-flow rotor |
| Type of seal: | Sealless (SL) |
| Viscosity (up to max. mPas)*.: | 400 |
| Voltage (V): | 21,6 |
Are there battery-powered drum pumps for hazardous areas?
Lutz does not currently offer any battery-powered drum pumps with ATEX approval for hazardous areas. Only fully explosion-proof drive systems may be used for flammable media such as ethanol.
The reason for this is safety requirements. Batteries are potential ignition sources because they can generate heat or sparks in the event of a fault. In hazardous areas, however, the entire system consisting of the motor, energy source, and electrical wiring must be ATEX-compliant. Individual protected components are not sufficient.
As soon as the application is located in a potentially explosive area, the use of an explosion-proof drum pump is mandatory. This applies regardless of the quantity being pumped or whether the application is stationary or takes place at different locations.
For such applications, we recommend using a drum pump with:
- ATEX-certified electric motor or compressed air motor
- Suitable grounding to prevent electrostatic charging
- Media-resistant materials for ethanol
If a mobile solution is to be implemented, it can be checked whether the power supply can be positioned outside the Ex zone or whether a compressed air-powered version is appropriate.
The specific design should always be based on the zone classification, operational safety requirements, and the desired delivery rate.
Skip product gallery
Accessory Items
Battery
Drum pump
TR3 Flow meter (PVDF)
for liquid lubricants and cleaning agents
Description:
Easy to operate, compact design and quick to install on all drum and container pumps: the Lutz TR3 flow meter in PP or PVDF. A handy meter that you can "count on" in any situation. The symmetrical measuring chamber allows it to be used for all flow directions and measures low-viscosity, non-flammable media precisely, quickly and, above all, efficiently.
PVDF for highly aggressive liquids
Examples of media: Chlorine bleach, nitric acid, sulphuric acid, ...
Two 1.5 V batteries (AAA) replaceable
Properties & advantages
Measurement according to the turbine wheel principle
Displays the partial and total quantity
Variable display position: mobile
Mobile on a Drum pump or with nozzle connection
Measuring range (min. g/min) from 5 l/min - 120 l/min
Simple battery change
Battery
Drum pump
Dispensing nozzle Niro
for liquid lubricants and cleaning agents
Description:
For dispensing and transferring liquids in the Foodstuffs and Pharmaceutical Industry as well as flammable and highly flammable liquids. The housing and the valve plug of the dispensing nozzle are made of stainless steel (1.4571) and are equipped with a protective bracket and a swivel coupling.
EPDM seal is available on request at an extra charge
Connection: external thread G 1 1/4"
Properties & advantages
For pumping in potentially explosive environments
Simple adjustment of the volume flow
Easy to operate
Safe filling or transferring of the respective liquid
Rotary coupling ensures tightness at high pressure
Battery
Drum pump
IBC traverse
for liquid lubricants and cleaning agents
Description:
The IBC traverse is used to safely remove and install the Pump tubes or the double diaphragm pump.
Suitable for Drum pumps, Eccentric screw pumps B70 and Diaphragm pumps
Includes transport straps for lifting vehicles and tensioning hooks for fixing to the container
Properties & advantages
Compatible with all standard IBC containers
Material: stainless steel
Clamping hook: galvanised steel
for Drum pumps / B70 Version: plastic guide sleeve with Ø 55 mm
Battery
Drum pump
Charger 24V
for liquid lubricants and cleaning agents
Description:
The charger is suitable for Motor B3 Battery.
additional wall mounting possible
The battery is not included in the scope of delivery
Properties & advantages
with integrated LED display
fast charging times for 2Ah max. 1h / for 4Ah max. 2h
long service life
high cycle stability
Battery
Drum pump
TR3 Flow meter (PP)
for liquid lubricants and cleaning agents
Description:
Easy to operate, compact design and quick to install on all drum and container pumps: the Lutz TR3 flow meter in PP or PVDF. A handy meter that you can "count on" in any situation. The symmetrical measuring chamber allows it to be used for all flow directions and measures low-viscosity, non-flammable media precisely, quickly and, above all, efficiently.
PP for neutral and aggressive media
Examples of media: Glycol, ferric chloride, hydrochloric acid, phosphoric acid, etc.
Two 1.5 V batteries (AAA) replaceable
Properties & advantages
Measurement according to the turbine wheel principle
Displays the partial and total quantity
Variable display position: variable
Mobile on a Drum pump or with nozzle connection
Measuring range (min. g/min) from 5 l/min - 120 l/min
Simple battery change
Battery
Drum pump
Lutz tap valve PP
for liquid lubricants and cleaning agents
Description:
For filling and decanting neutral and aggressive liquids. The liquid flow can be easily adjusted using a screw cap. The body of the dispensing valve is made of polypropylene (PP) and has a clip-on bracket. The valve is sealed using an FPM seal.
The outlet spout has a diameter of 12 mm
Properties & advantages
Connection: hose nozzle DN 19 (3/4")
Simple adjustment of the flow rate
Dispensing valve made of polypropylene (PP)
Battery
Drum pump
Barrel adapter PP
for liquid lubricants and cleaning agents
Description:
The drum adapter stabilises the Pump tube or Pump in the drum or Container opening. It prevents the Pump from tipping over in the empty drum.
Detailed information on the various Container openings is available on request
for the Pump tube B2
Properties & advantages
Stabilisation of the Drum pump
Protection against the Pump tube falling out
Battery
Drum pump
Battery 24 V
for liquid lubricants and cleaning agents
Description:
The battery is suitable for the Battery motor B2 Battery and consists of high-quality Li-Ion cells.
1 battery charge empties approx. 12 x 200 litre containers
available as 2Ah or 4Ah battery
The charger is not included in the scope of delivery
Properties & advantages
Robust housing
long service life
high cycle stability
Voltage: 24 V
Skip product gallery
Similar Items
Battery
Drum pump
Battery Drum pumps - B2 Battery PVDF
for liquid lubricants and cleaning agents
Description:
The B2 Battery Drum pump is suitable for low-viscosity, aqueous to slightly viscous media. The set is suitable for removing small containers such as canisters or hobbocks. The Pump is flexible at all times and thus conserves important resources.
Replaceable, powerful rechargeable battery with Li-Ion
Battery life 35 min at maximum speed
1 battery charge empties approx. 12 x 200 litre containers
Properties & advantages
BLDC Motor with high efficiency of up to 70%
Infinitely variable
Long battery life
Automatic switch-off in case of overload
Sophisticated quick-release fastener
Battery
Drum pump
Rechargeable battery Drum pumps - B2 Battery PP
for liquid lubricants and cleaning agents
Description:
The B2 Battery Drum pump is suitable for low-viscosity, aqueous to slightly viscous media. The set is suitable for removing small containers such as canisters or hobbocks. The Pump is flexible at all times and thus conserves important resources.
Replaceable, powerful rechargeable battery with Li-Ion
Battery life 35 min at maximum speed
1 battery charge empties approx. 12 x 200 litre containers
Properties & advantages
BLDC Motor with high efficiency of up to 70%
Infinitely variable
Long battery life
Automatic switch-off in case of overload
Sophisticated quick-release fastener