Accumulator Drum pumps - concentrated acids and alkalis
Skip image gallery
Battery
Drum pump
*Illustration may differ from the actual product
Available immediately, delivery time: Available from stock (approx. 5 working days)
Product number:
0207-206
Product information "Accumulator Drum pumps - concentrated acids and alkalis"
Description:
The new B3 Battery is a Battery motors for demanding and efficient pump applications. The current-independent application area: enables the greatest possible flexibility with the world's highest volume flow of a battery pump (up to 180 l/m). Perfectly suited for withdrawing or transferring concentrated acids and alkalis.
- Examples of media: Chloric acid, chromic acid, sulphuric acid, nitric acid, hydrofluoric acid and sodium hypochlorite etc.
- Pump tubes equipped with Lutz original handwheel
Properties & advantages
- wear-free, particularly low-noise BLDC motor
- Optimised drum emptying
- Infinitely variable
- Extremely high Power with low weight
- Maintenance without special tools
- Seal modules of the seal-less (DL) Pump can be replaced
- Long service life
| Bearings (Material): | ETFE / PTFE |
|---|---|
| Delivery head (up to max. m wc)*.: | 11,8 |
| Density (up to kg/dm³): | 1,4 |
| Drive shaft (Material): | Hastelloy C (2.4610) |
| Drive type: | Battery |
| Flow rate (up to max. g/min)*.: | 20.34 |
| Immersion depth (inch): | from 39" (1000 mm) |
| Immersion tube diameter (max. inch): | 41 |
| Impeller (Material): | ETFE (ethylene tetrafluoroethylene copolymer) |
| Liquid temperature (max. °C): | 100 (212,0 °F) |
| Mechanical seal (Material): | No Seals in contact with the medium |
| Power (W): | 320 |
| Protection class: | IP24 |
| Pump tube material (Material): | PVDF (polyvinylidene fluoride) |
| Static seal (Material): | No Seals in contact with the medium |
| Suitable fluids: | Chloric acid, Chromic acid, Hydrofluoric acid, Nitric acid, Sodium hypochlorite, Sulphuric acid |
| Thread (inch) outside: | 1 1/4" |
| Type of impeller / Drive type: | Radial-flow impeller |
| Type of seal: | Sealless (SL) |
| Viscosity (up to max. mPas)*.: | on request |
| Voltage (V): | 24 |
Are there battery-powered drum pumps for hazardous areas?
Lutz does not currently offer any battery-powered drum pumps with ATEX approval for hazardous areas. Only fully explosion-proof drive systems may be used for flammable media such as ethanol.
The reason for this is safety requirements. Batteries are potential ignition sources because they can generate heat or sparks in the event of a fault. In hazardous areas, however, the entire system consisting of the motor, energy source, and electrical wiring must be ATEX-compliant. Individual protected components are not sufficient.
As soon as the application is located in a potentially explosive area, the use of an explosion-proof drum pump is mandatory. This applies regardless of the quantity being pumped or whether the application is stationary or takes place at different locations.
For such applications, we recommend using a drum pump with:
- ATEX-certified electric motor or compressed air motor
- Suitable grounding to prevent electrostatic charging
- Media-resistant materials for ethanol
If a mobile solution is to be implemented, it can be checked whether the power supply can be positioned outside the Ex zone or whether a compressed air-powered version is appropriate.
The specific design should always be based on the zone classification, operational safety requirements, and the desired delivery rate.
Skip product gallery
Similar Items
Battery
Drum pump
Drum pump battery - Mineral oils
for highly chemical liquids and salts
Description:
The new B3 Battery is a Battery motors for demanding and efficient pump applications. The current-independent application area: enables the greatest possible flexibility with the world's highest volume flow of a battery pump (up to 180 l/m). Perfectly suited for extracting or transferring mineral oils.
Examples of media: Diesel, heating oil, hydraulic oil, machine oil and engine oil etc.
Pump tube equipped with Lutz Original handwheel
Suitable for filling or decanting alternative fuels
Properties & advantages
wear-free, particularly low-noise BLDC motor
Optimised drum emptying
Infinitely variable
Extremely high Power with low weight
Maintenance without special tools
Sealing modules of the sealless (DL) Pump can be replaced
Long service life
Battery
Drum pump
Accumulator Drum pumps - Acids
for highly chemical liquids and salts
Description:
The new B3 Battery is a Battery motors for demanding and efficient pump applications. The current-independent application area: enables the greatest possible flexibility with the world's highest volume flow of a battery pump (up to 180 l/m). Perfectly suited for extracting or transferring acids.
Examples of media: Hydrochloric acid, battery acid, iron-III-chloride, phosphoric acid, chromic acid and citric acid etc.
Pump tubes equipped with Lutz original handwheel
Suitable for filling or decanting oils such as rapeseed oil and vegetable oil
Properties & advantages
Wear-free, particularly low-noise BLDC motor
Optimised drum emptying
Infinitely variable
Extremely high Power with low weight
Maintenance without special tools
Sealing modules of the sealless (DL) Pump can be replaced
Long service life
Skip product gallery
Accessory Items
Battery
Drum pump
Foot strainer for Pump tubes Ø 41mm
for highly chemical liquids and salts
Description:
The foot strainer can be used for PP, PVDF, aluminium and stainless steel Pump tubes. By attaching the strainer to the pump foot, coarse impurities can be kept away from important components such as the drive (rotor, impeller).
For attaching to the pump base and the suction pipe with Ø 41 mm
Properties & advantages
Prevents contamination in the Pump tube by filtering it out
Outer pipe diameter 55 mm
Mesh size 20 x 2 mm
Battery
Drum pump
Barrel adapter
for highly chemical liquids and salts
Description:
The drum adapter is for fastening the Pump or Pump tubes in the drum opening. It prevents the Pump from tipping over when the drum is empty.
Material: PP / ST37 / steel, galvanised / PE
Properties & advantages
Stabilisation of the Pump tube
External thread 2", 56 x 4 and 70 x6
Battery
Drum pump
Container lid
for highly chemical liquids and salts
Description:
The container lid with G 2″ thread was specially developed to accommodate a drum adapter on IBC containers with a Nominal diameter: 150 mm or 225 mm. Made of PE, it is suitable for a secure and durable connection in the industrial transfer and emptying process.
Properties & advantages
Material: PE
Thread: 2" IG
Battery
Drum pump
Battery 24 V
for highly chemical liquids and salts
Description:
The battery is suitable for the Battery motor B2 Battery and consists of high-quality Li-Ion cells.
1 battery charge empties approx. 12 x 200 litre containers
available as 2Ah or 4Ah battery
The charger is not included in the scope of delivery
Properties & advantages
Robust housing
long service life
high cycle stability
Voltage: 24 V
Battery
Drum pump
Hose set for concentrated alkalis and acids
for highly chemical liquids and salts
Description:
Hose set is for concentrated alkalis + acids. The set is FDA and USP Class VI compliant. The set is used for connection to the Pump tube or dispensing nozzle.
Also available in special lengths on request
Suitable for filling or decanting chemicals, foodstuffs and hygiene products
Properties & advantages
Nominal diameter (DN) 19 (3/4")
PVDF hose connection
Pre-assembled hose connections and hose clamps
Battery
Drum pump
TR3 Flow meter (PVDF)
for highly chemical liquids and salts
Description:
Easy to operate, compact design and quick to install on all drum and container pumps: the Lutz TR3 flow meter in PP or PVDF. A handy meter that you can "count on" in any situation. The symmetrical measuring chamber allows it to be used for all flow directions and measures low-viscosity, non-flammable media precisely, quickly and, above all, efficiently.
PVDF for highly aggressive liquids
Examples of media: Chlorine bleach, nitric acid, sulphuric acid, ...
Two 1.5 V batteries (AAA) replaceable
Properties & advantages
Measurement according to the turbine wheel principle
Displays the partial and total quantity
Variable display position: mobile
Mobile on a Drum pump or with nozzle connection
Measuring range (min. g/min) from 5 l/min - 120 l/min
Simple battery change
Battery
Drum pump
Dispensing nozzle PVDF
for highly chemical liquids and salts
Description:
For filling and decanting concentrated acids and alkalis. The housing and the valve plug of the dispensing nozzle are made of polyvinylidene fluoride (PVDF) and are equipped with a protective bracket and two outlet spouts(Ø 23 mm and Ø 12mm).each. The dispensing nozzle is sealed using an FPM seal.
Seals FFPM or FEP / FPM are available on request at extra cost
Connection: external thread G 1 1/4"
Optionally available as a variant with a button for direct operation of the relay module (no communication module required)
Properties & advantages
Simple adjustment of the volume flow
Easy to operate
Safe filling or decanting of the respective liquid
Battery
Drum pump
Suspension device
for highly chemical liquids and salts
Description:
The suspension device is used to store the Drum pumps and prevents them from falling over.
For Pump tubes with handwheel
Properties & advantages
Protects against falling over
Increases the utility value
Battery
Drum pump
IBC traverse
for highly chemical liquids and salts
Description:
The IBC traverse is used to safely remove and install the Pump tubes or the double diaphragm pump.
Suitable for Drum pumps, Eccentric screw pumps B70 and Diaphragm pumps
Includes transport straps for lifting vehicles and tensioning hooks for fixing to the container
Properties & advantages
Compatible with all standard IBC containers
Material: stainless steel
Clamping hook: galvanised steel
for Drum pumps / B70 Version: plastic guide sleeve with Ø 55 mm
Battery
Drum pump
Charger 24V
for highly chemical liquids and salts
Description:
The charger is suitable for Motor B3 Battery.
additional wall mounting possible
The battery is not included in the scope of delivery
Properties & advantages
with integrated LED display
fast charging times for 2Ah max. 1h / for 4Ah max. 2h
long service life
high cycle stability