pH value control in drinking and pool water

Description: The new B3 Battery is a Battery motors for demanding and efficient pump applications. The current-independent application area: enables the greatest possible flexibility with the world's highest volume flow of a battery pump (up to 180 l/m). Perfectly suited for withdrawing or transferring concentrated acids and alkalis. Examples of media: Chloric acid, chromic acid, sulphuric acid, nitric acid, hydrofluoric acid and sodium hypochlorite etc. Pump tubes equipped with Lutz original handwheel Properties & advantages wear-free, particularly low-noise BLDC motor Optimised drum emptying Infinitely variable Extremely high Power with low weight Maintenance without special tools Seal modules of the seal-less (DL) Pump can be replaced Long service life

Description:Zuverlässig und individuell Mit der EASYPRO erhalten Sie ein komplett auf Ihre Bedürfnisse abgestimmtes System zur Überwachung und Regelung verschiedener Wasserparameter in Ihrem Schwimmbad. Durch den auf der EASYPRO verbauten Mehrkanalregler TOPAX® MC werden die Wasserparameter kontinuierlich gemessen und im Sollbereich gehalten. Er bietet die Möglichkeit eine Vielzahl von Aktoren und Stellgliedern anzusteuern und zeichnet sich durch seine sehr einfache und intuitive Bedienung aus. Die mehrfarbigen LEDs sorgen für eine optische Warnung, wenn die Wasserparameter den Sollbereich verlassen. -->Features & advantages: At a glance Modular structure of the inputs and outputs Up to four sensors and additionally up to four temperature sensors Freely-configurable overviews Difference value measurement (e.g. ΔpH) Graphical display of the deviation from the desired setpoint Up to four reference sets can be configured and loaded via a digital input or time control Service entries and sensor change can be saved Limit value control (can be used as a DIN contact for partial load operation in accordance with DIN 19643) 1 – 9 potential-free relay outputs Web server and Modbus protocol via Ethernet Trend Display Large colour touch-display Data is saved on a USB flash drive TOPAX® MC Housing dimensions (W x H x D)mm 302 x 240 x 107 Voltage supply 100 – 240 V AC, 50/60 Hz Power consumptionW max. 20 Analogue outputs for remote transmission 4 x 0/4 – 20 mA, working resistance max 500 Ω Disturbance variable inputmA 0/4 – 20 Interfaces Ethernet TCP/IP or RS485 Modbus RTU (optional) Protection class IP65 Ambient temperature°C -5 to +45 (no exposure to direct sunlight) Control characteristic P, PI, PID or PD behaviour, control direction selectable with disturbance variable feed forward, 2-side control selectable Measuring inputs (depending on version) Number of measuring inputs up to 4* Free chlorineAmperometric 3-electrode measuring cell with potentiostat (DMZ3.1)mg/l 0 – 15 (dependant on the measuring cell transconductance) CS120 excess chlorine measuring cellmg/l 0 – 10 (dependant on the measuring cell transconductance) Diaphragm-covered measuring cellmg/l 0 – 2 or 0 – 10(dependant on the measuring cell) Chlorine dioxideAmperometric 3-electrode measuring cell with potentiostat (DMZ3.1)mg/l 0 – 15 (dependant on the measuring cell transconductance) CS120 excess chlorine measuring cellmg/l 0 – 10 (dependant on the measuring cell transconductance) Diaphragm-covered measuring cellmg/l 0 – 2(dependant on the measuring cell) Total chlorineDiaphragm-covered measuring cellmg/l 0 – 10 (dependant on the measuring cell) pH valuepH single-rod measuring cellpH 0 – 14 (dependant on the single-rod measuring chain) Redox valueRedox single-rod measuring cellmV 0 – 1000 (dependant on the single-rod measuring chain) Conductivity conductiveConductivity measuring cell (k=1)mS/cm 0 – 2, 0 – 20 or 0 – 100(Depending on the configuration, corresponds to approx. 0 – 1 % or 0 – 5 % salt content) TemperaturePt100°C -10 bto +90 5 – 60 (configurable) Output modules (depending on version) Servomotor relay 2 x 230 V AC, 5 A (ohmic resistive load) kΩ Potentiometer feedback: 1 – 10 Servomotor 20 mAmA Constant 0/4 – 20 mA output Servomotor with 20 mA feedback Relays 2 x 230 V AC, 5 A (ohmic resistive load) Optocoupler 2 x 80 V DC, 5 mA Downloadshttps://www.lutzjescoamerica.com/fileadmin/data/dokumente/pg4/LJ-TOPAX_MC-DE-BA.pdfhttps://www.lutzjescoamerica.com/fileadmin/data/dokumente/pg4/LJ-TOPAX_MC-EN-BA.pdfhttps://www.lutzjescoamerica.com/fileadmin/data/dokumente/produktinfos/LJ-TOPAX-MC-DE-PI.pdfhttps://www.lutzjescoamerica.com/fileadmin/data/dokumente/produktinfos/LJ-TOPAX-MC-EN-PI.pdf

Description:Controlled disinfection The EASYPRO water sampling station enables standard-conform and continual measurement of the process water in public swimming pools, industrial plant and hot water installations up to 65 °C. The exact dosing of the disinfectant requires the constant measurement of the process water and the exact control of the dosing system. The modular design of the water sampling station enables its exact adaptation to suit your needs. -->Features & advantages: EASYPRO SMART components (fitted on the baseplate) TOPAX® MC multi-channel controller Peristaltic pumps Measuring cell fittings Flow control Flow adjustment valve Sampling water extraction point Temperature sensor Inflow and outflow tap Buffer solutions for adjusting the measuring cells Suction lines (not installed on the baseplate) Injection nozzles (not installed on the baseplate) The measuring cells are partially packaged separately and not pre-installed. EASYPRO SMART for swimming pools CP RP CPL Dimensions (W x H x D)mm 454 x 465 x 167 approx. Sample water requirementl/h 45 approx. Sample water infl ow and discharge Stop valve with hose clamp connector 6/8 Pressure resistancebar max. 3 Pressure loss in the water sampling stationbar 0.3 approx. Voltage supply 100 – 240 V AC, 50/60 Hz Power consumptionW max. 30 Analogue outputs for remote transmission 4 x 0/4 – 20 mA, working resistance max. 500 Ω Disturbance variable inputmA 0/4 – 20 Interfaces Ethernet TCP/IP or RS485 Modbus RTU (optional) Protection class IP65 (electronic controller) Ambient temperature°C -5 to +45 (no exposure to direct sunlight) Control characteristic P, PI, PID or PD behaviour, control direction selectable with distur-bance variable feed forward, 2-side control selectable Measuring inputs (depending on version) Number of measuring inputs 2a 3b Free chlorineCS120 excess chlorine measuring cellmg/l 0 – 15c - 0 – 15c pH valuepH single-rod measuring cellpH 2 – 12d or 0 – 14d Redox valueRedox single-rod measuring cellmV - 0 – 1000 - Conductivity conductiveConductivity measuring cell (k=1)mV - 0 – 2e, 0 – 20e or 0 – 100e TemperaturePt100°C 5 – 45 Output modules (depending on version) Number of output modules up to 4 Servomotor relay 2 x 230 V AC, 5 A (ohmic load) kΩ Potentiometer feedback: 1 – 10 Servomotor 20 mA Constant 0/4 – 20 mA output Servomotor with 20 mA feedback Relay 2 x 230 V AC, 5 A (ohmic load) Optocoupler 2 x 80 V DC, 5 mA Downloadshttps://www.lutzjescoamerica.com/fileadmin/data/dokumente/pg4/LJ-EASYPRO-DE-BA.pdfhttps://www.lutzjescoamerica.com/fileadmin/data/dokumente/pg4/LJ-EASYPRO-EN-BA.pdfhttps://www.lutzjescoamerica.com/fileadmin/data/dokumente/produktinfos/LJ-EASYPRO-Schwimmbad-DE-PI.pdfhttps://www.lutzjescoamerica.com/fileadmin/data/dokumente/produktinfos/LJ-EASYPRO-pool-EN-PI.pdf

Description:Simple to use and space-saving MAGDOS LK plays an important role in the reliable and accurate dosing of liquids in process sequences and is available in seven power ranges. Double-ball valves ensure accurate dosing. To adapt the dosing performance, the stroke frequency can be adjusted manually or via an external control contact. The MAGDOS LK doesn't just impress with its elegant design; the graphical display with a multi-language menu as well as the dosing pump's operation using the integrated keyboard simplifies its use.Features & advantages: Capacity range from 0.09 to 4.00 gph, max. back pressure 232 psig Power supply 230 V ± 10 %, 50/60 Hz, IP65 or 115 V ± 10 %, 50/60 Hz Dosing head ventilation (plastic version) Suitable for wall and floor mounting Material finishes PVC, PP, PVDF and stainless steel Stroke frequency can be precisely adjusted via the keyboard Graphic display with multi-language menu Pulse input (increase and reduction) Level input with early warning and main alarm Release input for external start/stop Supply amount displayed in various units Maximum delivery rate can be limited Energy-saving "Eco-mode" is available Stroke feedback output CSA and UL certified MAGDOS LK 0512461015 Delivery capacity at max. pressuregph 0.090.200.500.891.642.403.43 ml/stroke 0.050.20.310.570.830.86 Max. pressurepsig 2321168743 Delivery capacity at average pressuregph 0.140.290.611.001.802.644.00 ml/stroke 0.080.070.240.350.630.921 Average pressurepsig 116584314 Nominal stroke frequencyRPM 120250160180250 Suction lift for non-gassing mediaft H2O 1696 Max. supply / inlet pressurepsig 11 Diameter of diaphragmin 0.9441.2991.535 Valve size DN3DN4 Voltage supply 230 V, ± 10 %, 50/60 Hz oder 115 V, ± 10 %, 50/60 Hz Power consumptionW 813192522 Protection class IP65 (with covering caps on the connections) Insulation class F Material PVC, PP, PVDF, 1.4571 WeightPVC, PP, PVDFlb ~ 7 Stainless Steel ~ 9.5 Ambient temperature range°F Stainless Steel/PVDF 41° - 113° (41° - 104° with PVC parts) Max. temperature of the medium°F Stainless Steel/PVDF 176° (with PVC parts 95°; with PP parts 140° Downloadshttps://www.lutzjescoamerica.com/fileadmin/data/dokumente/pg1/LJ-MAGDOS_LK_LP-EN-BA.pdfhttps://www.lutzjescoamerica.com/fileadmin/data/data_usa/documents/pg1/Spec_Sheet-MAGDOS_LK.pdfhttps://www.lutzjescoamerica.com/fileadmin/data/data_usa/documents/pg1/Spec_Sheet-MAGDOS_LK-Spanish.pdf