Complete drainage

Used wherever drums or other containers need to be emptied almost completely. Suitable for neutral liquids, but also for combustible, flammable liquids. The version PURE is also available with FDA approval.

Residual emptying operating principle

(1) When the sealing pot is open, the liquid can be pumped out.

(2) Sealing pot is closed. A return flow of the liquid is prevented, so the residual quantity can be "taken along" when the container is changed

Complete drum drainage -  environmentally friendly and cost-saving

Lutz pump tubes RE in stainless steel and polypropylene. They not only protect the environment, but also your wallet. On the one hand, the liquid is used to the maximum, on the other hand, the costs for disposing of residuals are drastically reduced, as only the smallest residues remains in the containers. The pump foot is closed when the motor is running by lowering the sealing pot inside the pump tube. The sealing pot locks the pump foot and prevents the liquid that has flowed in from running back into the drum. Locking is done in the blink of an eye - via a small lever below the handwheel. Once the motor is switched off, the pump tube with the enclosed liquid can be moved to the next drum.

How does the residual emptying pump tube work?

Our products

Our complete range of waste bins

Filter
Explosion protection
Electric
Complete set
Pump set for residual emptying - Explosive media
For aggressive and highly flammable liquids
Description: The pump set is suitable for low-viscosity, flammable and highly flammable liquids and hydrocarbons. Perfectly suited for the removal or transfer of explosive media and solvents. Optionally available with Ex plug Pumping unit equipped with Lutz original handwheel Suitable for emptying drums of alternative fuels, oils and flammable liquids Features & advantages Optionally with electric or compressed air drive No lubricants and therefore no contamination of the pumped liquid by lubricants optimised drum emptying with a residual quantity of approx. 0.1 litre No leaks if the pumping station is tilted or moved Maximum product utilisation with reduced drum cleaning and disposal costs Approved in accordance with ATEX Directive 2014/34/EU, category 1/2
Explosion protection
Elektrisch
Complete set
Pump set for emptying residues - Solvent
for highly flammable hydrocarbons
Description: The pump set is suitable for low-viscosity, flammable and highly flammable hydrocarbons and is perfect for dispensing or decanting solvents. Examples of media: Ethanol, petrol, butanol, isopropanol, paraffin, methanol and petroleum, etc. Pumping unit equipped with Lutz original handwheel Suitable for emptying drums of alternative fuels, oils and flammable liquids Features & advantages Optionally with electric or compressed air drive No lubricants and therefore no contamination of the pumped liquid by lubricants optimised drum emptying with a residual quantity of approx. 0.1 litre No leaks if the pumping station is tilted or moved Maximum product utilisation with reduced drum cleaning and disposal costs Approved in accordance with ATEX Directive 2014/34/EU, category 1/2
Explosion protection
Electric
Barrel pump
Drum pump for residual emptying - Solvent
for highly flammable hydrocarbons
Description: The drum pump is suitable for low-viscosity, flammable and combustible liquids and hydrocarbons. Perfectly suited for the removal or decanting of explosive media and solvents. Optionally available with Ex plug Pumping unit equipped with Lutz original handwheel Suitable for emptying drums of alternative fuels, oils and flammable liquids Features & advantages Optionally with electric or compressed air drive No lubricants and therefore no contamination of the pumped liquid by lubricants optimised drum emptying with a residual quantity of approx. 0.1 litre No leaks if the pumping station is tilted or moved Maximum product utilisation with reduced drum cleaning and disposal costs Approved in accordance with ATEX Directive 2014/34/EU, category 1/2
Your contact person
Lutz Pumpen | Contact
Do you have questions about drum pumps, container emptying, double diaphragm pumps, flow measurement or centrifugal pumps?
Our service team will be happy to assist you. Please send us an enquiry or give us a call.
+49 9342 879 - 260
Contact request
Fields marked with asterisks (*) are required.
Privacy*

Further informationen about the usage of your personal data can be found here

Your contact person
Lutz Pumpen | Contact
Do you have questions about drum pumps, container emptying, double diaphragm pumps, flow measurement or centrifugal pumps?
Our service team will be happy to assist you. Please send us an enquiry or give us a call.
+49 9342 879 - 260