Eccentric screw pumps
Progressing cavity pumps Accessories
brass
Bypass valve
For Eccentric screw pumps B70
Description:
The bypass valve is recommended when using a shut-off valve.
Shut-off valve for nozzles, ball valves, etc.
Features & advantages
Made of brass / stainless steel
Opening pressure: 2.5 bar (brass version) / 5 bar (stainless steel version)
Connection type: 1 1/2"
Carrying handle
for motor MA II and ME II
Description:
The support bracket makes it easier to lift the pump out of or immerse it in the drums or containers. With an explosion-protected drive motor, the explosion-protection switch is attached to the support bracket
for motor MA II / ME II / B4/GT / three-phase motor / single-phase motor / three-phase motor for reduction gearboxes
Features & advantages
No heavy lifting necessary
Makes it easier to lift out or immerse the motor either with or without pump unit
Carrying handle
with integrated pulse sensor
Description:
The support bracket with integrated pulse sensor is the perfect upgrade for your B70V-D progressive cavity pump. Magnetic pulses from the rotating motor shaft are transmitted contactlessly to the pulse sensor via a pulse generator ring. The recorded pulses are analysed in the Lutz BE10 operating unit and output as the pumped flow rate on the display based on the previously determined calibration factor. By adding the RM10 relay module and corresponding connection cables, the system can also be used as a filling/transfer station with quantity preselection (batch function), as is known from the modular Lutz flow meters. Alternatively, the reed pulses can also be analysed via customer evaluation units and external control units.
The pulse transmitter ring and operating unit must be ordered separately
Can be combined with RM10 relay modules and other modules
Features & advantages
Simple operation and control
Cost-effective retrofitting for existing B70V-D progressive cavity pumps
Maximum mobility thanks to compact unit
Explosion protection
Stainless steel
Clamping device
For Eccentric screw pumps B70V
Description:
The clamping device is for fastening the B70V progressive cavity pump in open and thick-walled drums and containers.
Suitable for a wide range of pumping station diameters
Features & advantages
Made of stainless steel
Explosion protection
Alternating current
CEAG
Ex plug
for motor ME II and for B70V-SR (Ex)
Description:
The CEE round plugs are suitable for three-phase motors (three-phase current) and electric motors (alternating current) and are used in potentially explosive areas or environments.
Splash-proof
Features & benefits
Certification: EEx de IIC T6
Protection class: IP 65
Rotary (3-pole) or alternating current (5-pole)
Explosion protection
Alternating current
CEAG
Ex socket outlet
for motor ME II and for B70V-SR (Ex)
Description:
The CEE socket outlets are suitable for three-phase motors (three-phase current) and electric motors (alternating current) and are used in potentially explosive areas or environments.
Splash-proof
Features & benefits
Certification: EEx de IIC T6
Protection class: IP 65
Rotary (3-pole) or alternating current (5-pole)
PP
FASSADAPTER
for the for Eccentric screw pumps B70V
Description:
The drum adapter is required to secure the pump in the drum opening. It prevents the pump from tipping over when the drum is empty.
Features & advantages
Material made of PP / St 37
Explosion protection
Stainless steel
Foot strainer for Eccentric screw pumps
for the B70V eccentric screw pump
Description:
The foot strainer can be used with Eccentric screw pumps. By fitting the strainer onto the pump base, coarse contaminants can be kept away from vital components such as the drive.
For fitting onto the pump base
Properties & Benefits
Prevents contaminants from entering the pump tube by filtering them out
Material: Stainless steel (1.4571)
DN 9 (3/8")
Hose clamps
for hose size DN 9
Description:
The hose clamp is made of stainless steel and is suitable for attaching the various delivery hoses to the hose connection.
Nominal sizes: DN 9 / DN 13 / DN 19 / DN 25 / DN 32 - 38 / DN 50
PP
DN 50 x 2" internal thread
Hose connection
for DMP 2" and B70-V
Description:
The hose connection connects the delivery hoses to the pressure/suction nozzles of the double diaphragm pumps or the dispensing nozzle. When using a double diaphragm pump, either a suitable reducing nipple or a threaded bottle must be used in addition to the hose connection.
Special connections are available on request
Properties & advantages
Materials PP / PVDF / stainless steel
Connections: DN 38 x 1 1/2" female thread / DN 50 x 2" female thread
Stainless steel
DN 25 (1")
Hose connection
for internal thread 1 1/2"
Description:
For connecting the delivery hoses to the B70V-D pumping station.
Nominal sizes: DN 25 / DN 32 / DN 38
Features & advantages
Connection thread: 1 1/2"
Stainless steel material
DN 38 (1 1/2")
Seal FPM
Hose connection
with Tri-Clamp DN 50
Description:
The hose connection with Tri-Clamp is required to connect the delivery hose to the B70 progressive cavity pump, the discharge elbow or the Tri-Clamp fittings (consisting of hose nozzle, locking clamp and seal).
For progressing cavity pumps
Properties & advantages
Material stainless steel (1.4404)
For hoses with nominal diameter DN 38 / DN 50
Explosion protection
DN 19 (3/4")
FPM
Hose integration
with Tri-Clamp DN 32
Description:
For connecting conductive delivery hoses to the pump, nozzle/outlet elbow or Tri-Clamp fittings in potentially explosive atmospheres. The hose connection ensures a good conductive transition between the conductive hose and pump/fitting. The ohmic resistance between the fittings must be less than106 ohms. The hose connection consists of a hose connector, a clamping shell, a locking clip and a seal.
For progressing cavity pumps
Properties & advantages
Stainless steel materials (1.4404)
Only suitable in conjunction with the universal chemical hose
in accordance with the DIN EN 12 115 standard
Explosion protection
brass
Hose integration
For Eccentric screw pumps
Description:
The hose connection ensures a good conductive transition between the hose and the pumping station. The use of conductive hoses is mandatory in potentially explosive atmospheres. The ohmic resistance between the fittings must be less than106 ohms.
For progressive cavity pumps and double diaphragm pumps
Properties & advantages
Made of brass / stainless steel (1.4571)
For hoses with nominal diameter DN 32 / DN 38 / DN 50
DN 19 (3/4")
2 m
Hose set alkalis + acids
For acidic liquids and low-viscosity chemicals
Description:
The hose set is suitable for aggressive and non-flammable liquids, but also for food liquids. The hose is made of PVC with an embedded and galvanised steel wire helix (smooth inside and outside). The set is used for connection to the pumping station or nozzle.
Also available in special lengths on request
Features & advantages
Nominal diameter DN 19 (3/4")
PP hose connection
Pre-assembled hose connections and hose clamps
Foodstuffs
Explosion protection
DN 19 (3/4")
Hose set Ex-Pure
For watery and fatty Foodstuffs
Description:
The hose set is suitable for aqueous and fatty foods. The hose is electrically conductive so that it can also be used in potentially explosive environments. The set is used for connection to the pump unit or the dispensing nozzle.
Also available in special lengths on request
Electrically conductive
Features & advantages
Hose connection: Tri-Clamp DN 32
Nominal width: DN 19 (3/4")
DN 19 (3/4")
2 m
Hose set for concentrated alkalis and acids
for highly chemical liquids and salts
Description:
The hose set is for concentrated alkalis + acids. The set is FDA and USP Class VI compliant. The set is used to connect to the pumping station or the dispensing nozzle.
Also available in special lengths on request
Suitable for filling or decanting chemicals, foodstuffs and hygiene products
Features & advantages
Nominal diameter DN 19 (3/4")
PVDF hose connection
Pre-assembled hose connections and hose clamps
Explosion protection
DN 19 (3/4")
2 m
Hose set for potentially explosive media
For aggressive and highly flammable liquids
Description:
The hose set is suitable for pure chemicals and potentially explosive liquids. The hose is electrically conductive so that it can also be used in potentially explosive environments. The set is used for connection to the pumping station or the dispensing nozzle.
Also available in special lengths on request
Electrically conductive
Features & advantages
Hose connection: 1 1/4" female thread
Nominal diameter: DN 19 (3/4")
Pre-assembled hose connections
Complies with EU regulations 10/2011 and 1935/2004
DN 25 (1")
2 m
Hose set mineral oils
For aggressive and non-flammable liquids
Description:
The hose set is suitable for aggressive and non-flammable liquids, but also for food liquids. The hose set is made of PVC with an embedded and galvanised steel wire helix. The set is used for connection to the pumping station or the dispensing nozzle.
Also available in special lengths on request
Features & advantages
Nominal diameter DN 25 (1")
Aluminium hose connection
Pre-assembled hose connections and hose clamps
Ø 30 mm
Aluminium
Hub, motor side
for B70V 120.1
Description:
If the motor is provided by the customer, the hub must also be ordered in accordance with the shaft diameter.
Material made of aluminium
Features & advantages
Shaft diameter: Ø 24 mm / Ø 25 mm / Ø 28 mm / Ø 30 mm
Explosion protection
Ø 19 mm
Aluminium
Hub, motor side
for Explosion-proof B70V 12.1 to 75.1
Description:
If the motor is provided by the customer, the hub must also be ordered in accordance with the shaft diameter.
Material made of aluminium
Features & advantages
Shaft diameter: Ø 19 mm / Ø 24 mm
Labelling: Ex II 2 G Ex h IIC T6...T4 Gb
Ø 14 mm
Aluminium
Hub, motor side
for B70V 12.1 to 75.1
Description:
If the motor is provided by the customer, the hub must also be ordered in accordance with the shaft diameter.
Material made of aluminium
Features & advantages
Shaft diameter: Ø 14 mm / Ø 19 mm / Ø 24 mm / Ø 28 mm
Stainless steel
IBC traverse
for Drum pumps and eccentric screw pumps B70
Description:
The IBC lifting beam is used to safely remove and install the pumping units or the double diaphragm pump.
Suitable for drum pumps, B70 progressive cavity pumps and diaphragm pumps
Includes transport straps for lifting vehicles and tensioning hooks for fixing to the container
Features & advantages
Compatible with all standard IBC containers
Material: stainless steel
Clamping hook: galvanised steel
for drum pumps / B70 version, guide sleeve with Ø 55 mm made of plastic
Stainless steel (1.4571)
Inline protection
for Pump tube B70V 120.1
Description:
The inliner protection is suitable for attachment to the pump foot. It protects sensitive drum inliners and bags from damage.