Peristaltic pumps

EASYDOS Peristaltic V is used in water treatment wherever low-pulsation dosing at low delivery pressures is required. Peristaltic pumps are characterised by their insensitivity to gas bubbles in the medium compared to diaphragm dosing pumps. Typical applications include the dosing of chlorine bleach, hydrogen peroxide and hydrochloric acid, but also the dosing of flocculants or cleaning agents, for example. Features & advantages Capacity range 7 - 9000 ml/h, up to 2 bar Self-priming, speed-controlled peristaltic pump with adjustable flow rate via potentiometer Double ball-bearing gearbox for a long service life Hose filling button for quick filling of the supply lines Integrated level monitoring and fault signalling relay output Compact, easy-to-install housing

PERIDOS FXM 2 - The low-maintenance peristaltic pump for abrasive and outgassing mediaPowerfulLow-maintenance. Industry 4.0-ready. The PERIDOS FXM 2 from Lutz-Jesco is the high-performance peristaltic pump for abrasive, viscous or corrosive media - designed for maximum process reliability, ultra-fine dosing and uninterrupted 24/7 operation.For demanding dosing processes in harsh industrial environments Whether in water and waste water treatment, the chemical industry or mining: the FXM 2 impresses with its precise delivery, intuitive control and maintenance-optimised design. Ideal for anyone who expects robust technology without compromises. Precise dosing with maximum control The FXM 2 doses up to 176 l/h at a delivery pressure of 8.6 bar - with an exceptional turndown ratio of 5000:1. This means that even fine adjustment down to 0.035 l/h is possible - ideal for sensitive processes with high reproducibility. Real-time monitoring & leakage protection Thanks to the optional Flow Verification Sensor (FVS) and non-contact leak detection (TLD), the FXM 2 recognises deviations immediately - and actively protects your processes from downtime, loss of quality or environmental damage.Maintenance in minutes - without special tools The hose is the only wearing part. It can be replaced in a few simple steps and without tools - completely without dismantling. This saves you time, reduces your operating costs and increases the availability of your system.Intelligent networking - ready for Industry 4.0 Digital interfaces such as Ethernet/IP, Modbus TCP, 4-20 mA or 0-10 VDC enable seamless integration into existing SCADA and control systems. Up to 17 operating states can be recorded, analysed and actively controlled. ✅ Advantages of the FXM 2 peristaltic pump: Self-priming & dry-running safe: Maximum reliability in 24/7 operation High delivery rate: Up to 176 l/h at 8.6 bar - ideal for abrasive and corrosive media Industry 4.0-capable: Ethernet/IP, Modbus TCP, 0-10 VDC, 4-20 mALow-maintenance & efficient: tool-free hose change in just a few minutes Robust construction: Powder-coated aluminium, chemical-resistant hoses SCADA-compatible: Up to 17 operating parameters can be analysed Digitally networkable: SCADA/DCS integration via Modbus TCP, Ethernet/IP, 0-10 VDC, 4-20 mA Predictive maintenance: Optional pump monitor & leakage sensor for predictive maintenanceCertified & safe: UL 778, CSA, WQA (NSF/ANSI/CAN 61 & 372)

PERIDOS FXM 3 - Maximum performance for demanding pumping processes The PERIDOS FXM 3 from Lutz-Jesco is the most powerful peristaltic pump in the FXM series - built for large-volume pumping processes with aggressive, abrasive or viscous media. Reliable. Low maintenance. Fully networkable. Ideal for high-volume dosing processes under difficult conditions Whether in the pulp, chemical or construction industry - the FXM 3 offers a combination of throughput, precision and process monitoring that is unrivalled in harsh industrial environments. Powerful, precise and smart With a flow rate of up to 840 l/h at 4.5 bar, the FXM 3 is the ideal solution for high-volume applications with high process reliability requirements. Thanks to the 5000:1 turndown ratio, the flow rate can be precisely controlled to less than 0.2 l/h - with a repeat accuracy of ±1 %. Maintenance? Takes only minutes The hose is the only media-carrying element and can be replaced in just a few minutes without special tools - and without dismantling. This reduces maintenance costs and increases system availability.Seamless monitoring. Digital control. With an optional flow verification sensor (FVS), capacitive leakage detection (TLD) and up to 17 analysable operating states, the FXM 3 enables seamless monitoring of your processes - for safe and predictive production.Fully integrated - ready for the future Thanks to industrial communication protocols (Ethernet/IP, Modbus TCP, 0-10 V, 4-20 mA), the FXM 3 can be seamlessly integrated into digital control systems. It is operated via an intuitive touchpad with menu-driven software - efficient, error-free and ready for immediate use. ✅ Advantages of the PERIDOS FXM 3 at a glance: Highest delivery rate: Up to 840 l/h at 4.5 bar - ideal for large-volume processes Safe continuous operation: Self-priming, safe to run dry, insensitive to gas Industry 4.0 interfaces: Ethernet/IP, Modbus TCP, 0-10 VDC, 4-20 mA Real-time process monitoring: Flow verification sensor & TLD leakage control Turndown ratio 5000:1: Ultra-fine control down to 0.17 l/h possibleHighest precision & low energy consumption: ±1 % repeat accuracy thanks to precision-manufactured rollersCertified & safe: UL 778, CSA, NSF/ANSI/CAN 61 & 372 Robust construction: High-quality materials for maximum durability

PERIDOS FXM 1 - Peristaltic pump for precise micro-dosing under extreme conditions Compact. Low maintenance. Reliable. The PERIDOS FXM 1 from Lutz-Jesco is the ideal solution for precise dosing tasks with aggressive, viscous or abrasive media - even under the toughest conditions and in continuous operation. Your solution for controlled dosing of aggressive media Whether precipitants in water treatment, additives in food production or chemicals in laboratories and industry: the FXM 1 offers you reliable performance in the smallest of spaces - hygienic, self-priming and dry-running safe. Developed for demanding applications With a delivery volume of 2.8 l/h at 1.5 bar, the FXM 1 is perfect for fine dosing tasks. It works with low pulsation, is reversible and does not require any non-return valves - this ensures reliable processes and high dosing accuracy. Compact and fully integrated The FXM 1 combines drive, control unit, electronics and pump head in one housing - for minimum space requirements and maximum efficiency. It can be easily integrated into existing systems and is ideal for modular applications or series assembly. Minimal maintenance effort Thanks to its clear design, the only part in contact with the medium is the hose - this can be changed in just a few minutes without tools. This significantly reduces downtimes and maintenance costs. Reliability in continuous operation The FXM 1 is self-priming, safe to run dry and insensitive to gas bubbles. It works reliably - even with an interrupted supply or empty pipes - without damaging the system. ✅ Advantages of the FXM 1 peristaltic pump: Compact & integrable: Cased-drive design for easy installation Delivery volume 2.8 l/h: Ideal for precise dosing of small quantities Low maintenance: Hose change in minutes, without tools Self-priming & dry-running safe: Operation without non-return valves possible Gas-resistant: Also pumps outgassing media such as sodium hypochlorite Low-pulsation flow rate: For stable processes in sensitive applications Robust materials: Parts in contact with media are made of chemical-resistant plastic Universally applicable: In chemistry, water treatment, food, agricultural technology