Progressing cavity pump unit B70V-D in PURE version
Skip image gallery
Foodstuffs
Seals EPDM
*Illustration may differ from the actual product
Delivery time 2-3 weeks (approx. 10-15 working days)
Product number:
auf Anfrage_01
Product information "Progressing cavity pump unit B70V-D in PURE version"
Description:
The progressive cavity pump B70V-D in PURE design is a powerful positive displacement pump for medium, high viscosity and viscous media up to the limits of flowability. Depending on the application, you can choose from a range of different speed motors, which can be combined with the pumping unit at any time. This gives you flexibility at all times and saves important resources.
- Also available in special immersion depths
- Examples of media: viscous cosmetic products, food, etc.
Features & advantages
- Uniform volume flow
- Quick and easy cleaning
- Gentle, low-pulsation product conveying
- Smooth running and low wear
- Large selection of robust and powerful drive motors
- Approved in accordance with ATEX Directive 2014/34/EU, category 1/2
| Certification: | FDA-compliant, Regulation (EC) 1935/2004 |
|---|---|
| Connection: | Tri-Clamp |
| Delivery head (up to max. bar)*.: | 6 |
| Drive shaft (Material): | Stainless steel (1.4571) |
| Explosion protection: | No |
| Flow rate (up to max. l/min)*.: | 12 |
| Immersion depth (mm): | 1000 |
| Immersion tube diameter (max. mm): | 54 |
| Liquid temperature (max °C): | 140 |
| Mechanical seal (Material): | WC , SiC, EPDM |
| Pressure joint (DN): | 50 |
| Pump tube material (Material): | Stainless steel (1.4571/1.4404) |
| Rotor (Material): | Stainless steel (1.4571) |
| Static seal (Material): | EPDM |
| Stator (Material): | PTFE (polytetrafluoroethylene) |
| Stator size: | 12.1 |
| Type: | B70V Pure |
| Type of impeller / Drive type: | Torsion shaft (medium viscosity media) |
| Type of seal: | Mechanical seal: (GLRD) |
| Viscosity (up to max. mPas)*.: | 100000 |
Skip product gallery
Accessory Items
Foodstuffs
Seals EPDM
FASSADAPTER
For Three-phase motors up to 400 volts
Description:
The drum adapter is required to secure the pump in the drum opening. It prevents the pump from tipping over when the drum is empty.
Features & advantages
Material made of PP / St 37
Foodstuffs
Seals EPDM
Clamping device
For Three-phase motors up to 400 volts
Description:
The clamping device is for fastening the B70V progressive cavity pump in open and thick-walled drums and containers.
Suitable for a wide range of pumping station diameters
Features & advantages
Made of stainless steel
Foodstuffs
Seals EPDM
Hose connection
For Three-phase motors up to 400 volts
Description:
The hose connection with Tri-Clamp is required to connect the delivery hose to the B70 progressive cavity pump, the discharge elbow or the Tri-Clamp fittings (consisting of hose nozzle, locking clamp and seal).
For progressing cavity pumps
Properties & advantages
Material stainless steel (1.4404)
For hoses with nominal diameter DN 38 / DN 50
Foodstuffs
Seals EPDM
Potential equalisation cable
For Three-phase motors up to 400 volts
Description:
The potential equalisation cable is used for the electrically conductive connection between the explosion-protected pump and the container and has the function of earthing and potential equalisation.
2 m with fastening clip
Features & advantages
Earthing and potential equalisation function
Foodstuffs
Seals EPDM
Outlet bend
For Three-phase motors up to 400 volts
Description:
The outlet elbow enables the direct transfer or filling of liquids into another container by mounting it on the pump outlet.
Made of stainless steel (1.4571, 1.4404)
Nominal diameter: DN 50
Features & advantages
Enables quick and direct transfer of liquids
EPDM seal
incl. seal and clamp
Foodstuffs
Seals EPDM
Balancer
For Three-phase motors up to 400 volts
Description:
The balancer makes it easier to insert and move the pump in the container and has an infinitely variable load adjustment. It is equipped with a special fall protection in the event of a spring breakage and offers maximum safety for long-term applications.
For drum pumps and progressing cavity pumps
Features & advantages
Load capacity from 10 - 30 kg
Cable pull up to 2 m
Foodstuffs
Seals EPDM
Mounting flange
For Three-phase motors up to 400 volts
Description:
The installation flange is attached to the B70V pump and a counter flange. The flange is welded directly to the pump unit.
Material: Stainless steel (1.4571)
Features & advantages
DN 80 / PN 10
according to the standard: DIN 2576
Pumping unit diameter Ø 52-54 mm
Foodstuffs
Seals EPDM
Hub, motor side
For Three-phase motors up to 400 volts
Description:
If the motor is provided by the customer, the hub must also be ordered in accordance with the shaft diameter.
Material made of aluminium
Features & advantages
Shaft diameter: Ø 14 mm / Ø 19 mm / Ø 24 mm / Ø 28 mm
Foodstuffs
Seals EPDM
Hose integration
For Three-phase motors up to 400 volts
Description:
For connecting conductive delivery hoses to the pump, nozzle/outlet elbow or Tri-Clamp fittings in potentially explosive atmospheres. The hose connection ensures a good conductive transition between the conductive hose and pump/fitting. The ohmic resistance between the fittings must be less than106 ohms. The hose connection consists of a hose connector, a clamping shell, a locking clip and a seal.
For progressing cavity pumps
Properties & advantages
Stainless steel materials (1.4404)
Only suitable in conjunction with the universal chemical hose
in accordance with the DIN EN 12 115 standard
Foodstuffs
Seals EPDM
Tri-Clamp locking clamp
For Three-phase motors up to 400 volts
Description:
The Tri-Clamp locking clamp is suitable for connecting Tri-Clamp fittings to a spigot.
Made of stainless steel (1.4408)
Features & advantages
Connection of Tri-Clamp DN 50 fittings
Connection to Tri-Clamp DN 50 connection piece
incl. seal
Foodstuffs
Seals EPDM
Tri-Clamp reducer
For Three-phase motors up to 400 volts
Description:
The Tri-Clamp reducer is suitable for connecting Tri-Clamp fittings to a spigot.
Made of stainless steel (1.4408)
Features & advantages
Connection of Tri-Clamp fittings DN 25 / 32 / 40
Connection to Tri-Clamp DN 50 connection piece