Pressureless and safe production of chlorine dioxide The EASYZON H is the compact complete solution for the safe on-site production of chlorine dioxide for water treatment, the food industry and process water. The system works fully automatically under Vacuum - for maximum user safety, high dosing accuracy and constant disinfection performance even at high pH values. Your benefits at a glance ✅ Safe handling under Vacuum - acid and chlorite are automatically drawn from the storage containers and mixed without any pressurised systems or risk of leakage. ✅ High process reliability - The vacuum process allows significantly longer suction distances than conventional Dosing pumps, ideal for flexible system concepts. ✅ Precise control of the chemical flows - integrated flow meters regulate the volume flows precisely; the product concentration can be set between 250 - 2000 mg/l ClO₂ as required. ✅ Automatic replenishment - via level sensors in the integrated 8-litre product tank; ensures continuous disinfection readiness. Intuitive control - via touchscreen, with clear system visualisation, multilingual menus and password-protected user levels. ✅ Real-time monitoring & alarm management - forwarding of alarm messages via Modbus TCP/IP or optionally via SMS telemetry. Efficiency & economy - low operating costs, minimised maintenance intervals and high energy efficiency significantly reduce life cycle costs Typical areas of application Legionella prevention in drinking water and cooling systems CIP disinfection in the Foodstuffs and beverage industry Biocide treatment of cooling towers and recooling plants Disinfection: of municipal drinking water and process water Secondary disinfection in public buildings Food treatment to extend shelf life Odour control in waste and process systems Why EASYZON H? The EASYZON H combines maximum safety, precise control and full compliance with standards in one system. Thanks to its modular design and optional skid version, the system can be seamlessly integrated into existing processes - from small waterworks to large industrial plants.

Maximum safety and efficiency in water treatment Whether for drinking water, process water or swimming pool water – the EASYCHLORGEN T produces fresh, stable sodium hypochlorite on-site. This ensures reliable and standard-compliant disinfection at all times without the need to transport and store dangerous chemicals. The advantages at a glance ✅ Safety and health protection – no need to handle dangerous chemicals: the only starting substance required is salt. Comes with integrated hydrogen detection.✅ Cost effective – achieve a stable chlorine content that lasts months without the need for any additives; vacuum dosing technology ensures long maintenance intervals✅ Process reliability – automatic fault detection with clear warnings; the system is self-regulating over a wide operating range without unnecessary shutdowns✅ Simple operation – touchscreen control, multilingual menus, intuitive handling✅ Flexibility – various capacity ranges (250–2000 g/h), modular structure, can be combined with various tank sizes✅ Low-maintenance – few wearing parts, easy to clean, no encrusting on the dosing points Typische Anwendungsbereiche Waterworks and municipal drinking water supplies The food industry (e.g. fruit and vegetable washing facilities, dairies and breweries Cooling water and process water treatment Industrial wastewater treatment Swimming pools and leisure centres

TECHNOSTAR - Flow-through chlorine electrolysis for swimming pools Hygienic water quality in accordance with DIN 19643 - without hazardous substances TECHNOSTAR flow-through chlorine electrolysis is the safe and sustainable solution for the disinfection of swimming and bathing pool water. The required chlorine is generated directly on site from ordinary salt (NaCl) in the pool water - without transport, storage or the use of chlorine gas and chlorine bleach. In addition to reliable disinfection, the process ensures salty, skin-friendly water and bathing comfort. Your benefits at a glance ✅ S afe & standard-compliant - disinfection without hazardous substances, DIN 19643-compliant.✅ Healthy bathing experience - no reddened eyes or mucous membrane irritation, skin-friendly water thanks to salt content.✅ High operational safety - external release, temperature and flow control: automatic adjustment to measured water values.efficiency & economy - salt as the only operating material, low maintenance, long service life of the electrolysis cells.✅ Flexible use - output ranges from 30 to 250g Cl2/h, infinitely variable, simple installation. Typical areas of application Public swimming pools and outdoor pools Hotel and wellness centres Leisure and adventure pools Municipal bathing facilities with high hygiene standards Thermal baths & spa areas Rehabilitation centres and clinics Why TECHNOSTAR? The combination of maximum operational safety, low operating costs and a noticeably more pleasant bathing experience makes the TECHNOSTAR the ideal choice for operators of public and private swimming pools. Algae, germs and bacteria are a thing of the past - with minimum maintenance and maximum reliability Scope of delivery of the TECHNOSTAR flow-through chlorine electrolyser To give you planning security right from the start, the TECHNOSTAR is supplied as a ready-to-connect system with all the essential components. The exact scope of delivery depends on the selected Version. TECHNOSTAR 2000 AT with thread Switch cabinet with control unit Temperature monitor Electrolytic cell(s) Connection cable Screw-in parts

PERIDOS FXM 3 - Maximum performance for demanding pumping processes The PERIDOS FXM 3 from Lutz-Jesco is the most powerful peristaltic pump in the FXM series - built for large-volume pumping processes with aggressive, abrasive or viscous media. Reliable. Low maintenance. Fully networkable. Ideal for high-volume dosing processes under difficult conditions Whether in the pulp, chemical or construction industry - the FXM 3 offers a combination of throughput, precision and process monitoring that is unrivalled in harsh industrial environments. Powerful, precise and smart With a flow rate of up to 840 l/h at 4.5 bar, the FXM 3 is the ideal solution for high-volume applications with high process reliability requirements. Thanks to the 5000:1 turndown ratio, the flow rate can be precisely controlled to less than 0.2 l/h - with a repeat accuracy of ±1 %. Maintenance? Takes only minutes The hose is the only media-carrying element and can be replaced in just a few minutes without special tools - and without dismantling. This reduces maintenance costs and increases system availability.Seamless monitoring. Digital control. With an optional flow verification sensor (FVS), capacitive leakage detection (TLD) and up to 17 analysable operating states, the FXM 3 enables seamless monitoring of your processes - for safe and predictive production.Fully integrated - ready for the future Thanks to industrial communication protocols (Ethernet/IP, Modbus TCP, 0-10 V, 4-20 mA), the FXM 3 can be seamlessly integrated into digital control systems. It is operated via an intuitive touchpad with menu-driven software - efficient, error-free and ready for immediate use. ✅ Advantages of the PERIDOS FXM 3 at a glance: Highest delivery rate: Up to 840 l/h at 4.5 bar - ideal for large-volume processes Safe continuous operation: Self-priming, safe to run dry, insensitive to gas Industry 4.0 interfaces: Ethernet/IP, Modbus TCP, 0-10 VDC, 4-20 mA Real-time process monitoring: Flow verification sensor & TLD leakage control Turndown ratio 5000:1: Ultra-fine control down to 0.17 l/h possibleHighest precision & low energy consumption: ±1 % repeat accuracy thanks to precision-manufactured rollersCertified & safe: UL 778, CSA, NSF/ANSI/CAN 61 & 372 Robust construction: High-quality materials for maximum durability

PERIDOS FXM 2 - The low-maintenance peristaltic pump for abrasive and outgassing mediaPowerfulLow-maintenance. Industry 4.0-ready. The PERIDOS FXM 2 from Lutz-Jesco is the high-performance peristaltic pump for abrasive, viscous or corrosive media - designed for maximum process reliability, ultra-fine dosing and uninterrupted 24/7 operation.For demanding dosing processes in harsh industrial environments Whether in water and waste water treatment, the chemical industry or mining: the FXM 2 impresses with its precise delivery, intuitive control and maintenance-optimised design. Ideal for anyone who expects robust technology without compromises. Precise dosing with maximum control The FXM 2 doses up to 176 l/h at a delivery pressure of 8.6 bar - with an exceptional turndown ratio of 5000:1. This means that even fine adjustment down to 0.035 l/h is possible - ideal for sensitive processes with high reproducibility. Real-time monitoring & leakage protection Thanks to the optional Flow Verification Sensor (FVS) and non-contact leak detection (TLD), the FXM 2 recognises deviations immediately - and actively protects your processes from downtime, loss of quality or environmental damage.Maintenance in minutes - without special tools The hose is the only wearing part. It can be replaced in a few simple steps and without tools - completely without dismantling. This saves you time, reduces your operating costs and increases the availability of your system.Intelligent networking - ready for Industry 4.0 Digital interfaces such as Ethernet/IP, Modbus TCP, 4-20 mA or 0-10 VDC enable seamless integration into existing SCADA and control systems. Up to 17 operating states can be recorded, analysed and actively controlled. ✅ Advantages of the FXM 2 peristaltic pump: Self-priming & dry-running safe: Maximum reliability in 24/7 operation High delivery rate: Up to 176 l/h at 8.6 bar - ideal for abrasive and corrosive media Industry 4.0-capable: Ethernet/IP, Modbus TCP, 0-10 VDC, 4-20 mALow-maintenance & efficient: tool-free hose change in just a few minutes Robust construction: Powder-coated aluminium, chemical-resistant hoses SCADA-compatible: Up to 17 operating parameters can be analysed Digitally networkable: SCADA/DCS integration via Modbus TCP, Ethernet/IP, 0-10 VDC, 4-20 mA Predictive maintenance: Optional pump monitor & leakage sensor for predictive maintenanceCertified & safe: UL 778, CSA, WQA (NSF/ANSI/CAN 61 & 372)

The mobile complete solution for grease & gear oil - quiet, efficient, completely mains-independent Mobile complete set for workshop & construction site - without electricity, without compressed air Whether on the construction site, in the workshop or in the field: The LubeDrive pumping unit set delivers lubricants to where they are needed - quickly, quietly and powerfully. Ideal for centralised lubrication systems and gearbox oil filling. Developed for maintenance technicians who need flexibility In agricultural and construction machinery technology, every minute counts. With the LubeDrive set, vehicles and systems can be filled directly on site - without any manual force or compressed air. Workshops in particular benefit from a simple, ready-to-use solution. No more inefficient pumping The set combines robust technology with maximum user-friendliness. Simply connect the cordless screwdriver - and work more efficiently than ever before. Quieter and faster than pneumatic systems, significantly less effort than with hand pumps. ✅ Your benefits with the LubeDrive pump set: Operation with a standard cordless screwdriver - no special tools required Without compressed air & electricity: Maximum mobility in any application environment Up to 2 kg/min pumping capacity: Saves valuable working time For greases up to NLGI-2 & gear oils Compatible with 10-60 kg containers Noticeably quieter than pneumatic systems Robust design for rough everyday working conditionsFor construction and agricultural vehicles in mobile useDeveloped for workshops and maintenance teams

The first battery-operated progressive cavity pump for grease & oil - without compromise, without limits Compact pumping unit for maximum independence for centralised lubrication systems & gear oil filling The LubeDrive pumping unit is the perfect partner for mobile maintenance applications in construction, industry and agricultural technology. Where compressed air is lacking and hand pumps are not sufficient, the LubeDrive impresses with its efficiency, flexibility and ease of use. For maintenance teams with responsibility - not for compromises Workshop personnel, service technicians and system operators know the problem: lubrication points that are difficult to access, no compressed air within reach, high effort required. With the LubeDrive pump unit, all you need is a cordless screwdriver - for simple, fast filling directly at the point of use. Simple to use - powerful in performance This pumping unit is ideal for anyone who already owns accessories or uses customised system solutions. It can be seamlessly integrated into existing equipment and ensures quiet, powerful operation - with no effort at all. ✅ Advantages of the LubeDrive pump unit: First-to-market technology: Unique solution without a comparable product Cordless screwdriver instead of compressor: Mobile, flexible, ready for use at any time Ideal for OEMs and industrial dealers: Customised for professional use Delivery up to 2 kg/min: Efficiency gains with every work step Quieter & faster than pneumatic alternatives Universally applicable for greases (up to NLGI-2) and gear oils Compatible with 10-60 kg containers Low-maintenance & user-friendly design

Canister pump tubes The new battery-powered canister pump offers a clean and safe solution for emptying canisters quickly. With a replaceable battery and quick-release fastener, the pump remains flexible and easy to use. Perfect for use on different containers without causing contamination. Highlights at a glance: Simple and quick change of the battery-powered drive unit Can be used anywhere without a power source No contamination of the media and the surrounding area Quick and easy to use thanks to lightweight equipment Ergonomic filling Infinitely variable to reduce the risk of accidents caused by splashing precise filling/dosing of small quantities possible Canister pumps for clean and fast emptying of canisters & small drums Various lengths available: 440 mm, 500 mm, 700 mm Flexible hose set with ball valve precise filling/dosing of small quantities possible

The versatile helper for your chemical applications With the "Robust" B2 Battery pump set, you have a flexible and powerful partner for dispensing oil-based lubricants (PPS), low-viscosity oil products, diesel and heating oil. Ideally suited for small containers such as canisters or hobbocks, this set enables you to work efficiently and conserve resources. Perfect for anyone who needs flexibility and reliability when handling oils. Highlights at a glance: Simple and quick change of the battery-powered drive Can be used anywhere without a power source No contamination of the media and the surrounding area Quick and easy to use thanks to lightweight equipment Ergonomic filling Infinitely variable to reduce the risk of accidents due to splashing Precise filling / dosing of small quantities possible

The versatile helper for your chemical applications With the "Universal" B2 Battery pump set, you have a flexible and powerful partner for dispensing liquid fertilisers, light acids and alkalis, neutral liquids as well as low-viscosity oils and diesel. Ideally suited for small containers such as canisters or hobbocks, this set enables you to work efficiently and conserve resources. Perfect for anyone who needs flexibility and reliability when handling chemicals. Highlights at a glance: Simple and quick change of the battery-powered drive unit Can be used anywhere without a power source No contamination of the media and the surrounding area Quick and easy to use thanks to lightweight equipment Ergonomic filling Infinitely variable to reduce the risk of accidents due to splashing precise filling/dosing of small quantities possible