Select a category
Our products
Our complete range of accessories
Filter pressure reducer
for Lutz Compressed air motors and Diaphragm pumps DMP 1/4 "to 2"
Description:
Filter pressure reducer with pressure gauge for setting the operating pressure.
Inlet pressure max. 16 bar
Ambient temperature max. 60°C
Features & advantages
Filter element 5 µm, Cellpor and 40 ?m, sintered bronze
Housing made of die-cast zinc and aluminium
Diaphragm and seals made of NBR
PP
DN 19 (3/4")
PP hose connection
with 1" internal thread connection
Description:
The hose connection connects the delivery hoses to Pump tubes and the double diaphragm pumps. When using a double diaphragm pump, a suitable reducing nipple must be used in addition to the hose connection
Special connections are available on request
Properties & advantages
Nominal diameter (DN): DN 19 x G 1" female thread
Material: PP
Foodstuffs
Explosion protection
DN 25 (1")
Universal chemical hose
for chemicals, food and hygiene products
Description:
The hose is suitable for pure chemicals, cosmetics, photographic chemicals, paints and adhesives, detergents and cleaning agents, hygiene products, as well as food and luxury foods. It is FDA and USP Class VI compliant and is electrically conductive so that it can also be used in potentially explosive environments.
Also available in special lengths on request
Nominal width: DN 13 / DN 19 / DN 25 / DN 32 / DN 38 / DN 50
Features & advantages
Operating pressure up to max. 16 bar
Colour coding: "blue/white/blue".
Complies with EU regulations 10/2011 and 1935/2004
Underpressure max 0.9 bar
DN 19 (3/4")
Hose clamp DN 19 (3/4")
Description:
The hose clamp is made of stainless steel and is suitable for attaching delivery hoses to the pump outlet or accessories.
The nominal diameter of the clamp corresponds to DN19 (3/4")
Features & advantages
Clamping range from 28.0 - 31.0 mm
Explosion protection
Stainless steel
Foot strainer for Eccentric screw pumps
for the Eccentric screw pumps B70V
Description:
The foot strainer can be used for progressive cavity pumps. By attaching the strainer to the pump foot, coarse impurities can be kept away from important components such as the drive.
For attaching to the pump base
Features & advantages
Prevents contamination in the pumping station by filtering it out
Material: Stainless steel (1.4571)
PP
Foot strainer PP
Suitable for the laboratory pump B1/B2 Battery and Lutz B2 Vario
Description:
For attaching to the pump foot. This keeps coarse impurities away from the rotating parts so that wear and tear on the pump can be reduced.
Is placed on the pump base
Features & benefits
Protects important parts from contamination
Reduces wear and tear on the pump
Dispensing nozzle PP
for acids and alkalis
Description:
For filling and decanting neutral and aggressive liquids. The body and the valve plug of the dispensing nozzle are made of polypropylene (PP) and are equipped with a protective bracket and two outlet nozzles ( Ø 23 mm and Ø 12mm).
Connection: external thread G 1 1/4"
Features & advantages
Simple adjustment of the volume flow
Safe filling or decanting of the respective liquid
Easy to operate
PP
Foot strainer for Pump tubes Ø 41mm
Suitable for Pump tube PP or suction pipe
Description:
The foot strainer can be used for PP, PVDF, aluminium and stainless steel pumping units. By attaching the strainer to the pump foot, coarse impurities can be kept away from important components such as the drive (rotor, impeller).
For attaching to the pump base and the suction pipe with Ø 41 mm
Features & advantages
Prevents contamination in the pumping station by filtering it out
Outer pipe diameter 55 mm
Mesh size 20 x 2 mm
PP
DN 19 (3/4")
Hose connection
with 1 1/4" internal thread connection
Description:
The hose connection connects the delivery hoses to the pumping station, the double diaphragm pumps or the dispensing nozzle. When using a double diaphragm pump, a suitable reducing nipple must be used in addition to the hose connection
Special connections are available on request
Features & advantages
Nominal sizes: DN 13 / DN 19 / DN 25 / DN 32
Materials PP / PVDF / aluminium / stainless steel / HC
FPM/FPM
DN 19 (3/4")
Hose connection PVDF, rotatable
for internal thread 1 1/4"
Description:
The hose connector connects the delivery hoses to the PVDF dispensing nozzle.
Nominal sizes: DN 19 / DN 25 / DN32
Features & advantages
Connection to 1 1/4" internal thread
Material made of PP
FPM / FPM seals
NW 150
SCREW COVER
for the Container pumps B50
Description:
The container lid is suitable for IBC containers.
Nominal width of 150 and 225
Properties & advantages
Material: PE
Suspension device
for Pump Lutz B2 Vario
Description:
The suspension device is used to safely store the B2 Vario drum and laboratory pump. This protects the pumps and increases their utility value at the same time.
Precisely adapted to the B2 Vario drum pump
Features & advantages
Increases the utility value
Protection against the pumping unit or drum pump falling down
Relay module RM10
for the ST10, SL10, VA10, HC10, HDO 250, HDO 400, HDO 500 series
Description:
The relay module enables volume preselection with the corresponding connection cables.
Voltage: 220 - 230V
Features & benefits
Frequency: 50 - 60 Hz
Labelling: II (2) G [Ex ib Gb] IIC
Suspension device
for Pump tubes with handwheel
Description:
The suspension device is used to store the drum pumps and prevents them from falling over.
For pumping stations with handwheel
Features & advantages
Protects against falling over
Increases the utility value
Explosion protection
Brass petrol nozzle
for solvents and highly flammable hydrocarbons
Description:
For dispensing and transferring solvents and neutral liquids. The housing and the valve plug of the dispensing nozzle are made of brass and are equipped with a swivel coupling and a protective bracket.The dispensing nozzle is sealed with a PTFE seal.
Connection: external thread G 1 1/4"
Features & advantages
Safe filling or decanting of the respective liquid
Easy to operate
Swivel coupling ensures tightness at high pressure
For pumping in potentially explosive environments
FASSADAPTER
for Drum pumps or Pump tubes PP, PVDF, aluminium and stainless steel
Description:
The drum adapter is for fastening the pump or pump unit in the drum opening. It prevents the pump from tipping over when the drum is empty.
Materials: PP / ST37 / steel, galvanised / PE
Features & advantages
Stabilisation of the pumping unit
External thread 2", 56 x 4 and 70 x6
Explosion protection
DN 19 (3/4")
2 m
Solvent hose set (NBR)
for highly flammable hydrocarbons
Description:
The hose set is suitable for a wide range of commercially available solvents. The hose is electrically conductive so that it can also be used in potentially explosive environments. The set is used to connect to the pumping station or dispensing nozzle.
Also available in special lengths on request
Electrically conductive
Features & advantages
Hose connection: 1 1/4" female thread
Nominal diameter: DN 19 (3/4")
Pre-assembled hose connections
Complies with EU regulations 10/2011 and 1935/2004
Carrying handle
for motor MA II and ME II
Description:
The support bracket makes it easier to lift the pump out of or immerse it in the drums or containers. With an explosion-protected drive motor, the explosion-protection switch is attached to the support bracket
for motor MA II / ME II / B4/GT / three-phase motor / single-phase motor / three-phase motor for reduction gearboxes
Features & advantages
No heavy lifting necessary
Makes it easier to lift out or immerse the motor either with or without pump unit
Stainless steel
IBC traverse
for Drum pumps and eccentric screw pumps B70
Description:
The IBC lifting beam is used to safely remove and install the pumping units or the double diaphragm pump.
Suitable for drum pumps, B70 progressive cavity pumps and diaphragm pumps
Includes transport straps for lifting vehicles and tensioning hooks for fixing to the container
Features & advantages
Compatible with all standard IBC containers
Material: stainless steel
Clamping hook: galvanised steel
for drum pumps / B70 version, guide sleeve with Ø 55 mm made of plastic
Aluminium nozzle
for mineral oils, heating oils and diesel
Description:
For transferring and filling mineral oils, heating oil and diesel. The dispensing nozzle housing and valve plug are made of aluminium and are equipped with a swivel joint and a protective bracket.The dispensing nozzle is sealed using an NBR seal.
Connection: Female thread G 1"
Features & advantages
Safe filling or decanting of the respective liquid
Easy to operate
Swivel joint ensures tightness at high pressure
Explosion protection
Alternating current
CEAG
Ex socket outlet
for motor ME II and for B70V-SR (Ex)
Description:
The CEE socket outlets are suitable for three-phase motors (three-phase current) and electric motors (alternating current) and are used in potentially explosive areas or environments.
Splash-proof
Features & benefits
Certification: EEx de IIC T6
Protection class: IP 65
Rotary (3-pole) or alternating current (5-pole)
Your contact person
Lutz-Jesco Middle East FZE
Our service team will be happy to assist you. Please send us an enquiry or give us a call.
Our service team will be happy to assist you. Please send us an enquiry or give us a call.
+971 6 5572205
info@jescome.com
