Deutsch
Flow Meter FLOWCON
For a perfect dosing result
The flow sensor FLOWCON was developed particularly for the monitoring of pulsating flows. Due to its very compact design, it can be mounted directly to the discharge valve of a dosing pump. A reed contact gives a potential free impulse on each stroke of the dosing pump.In combination with the electronic evaluation unit FLOWCON an operator has an effective and exact monitoring system for the liquid behavior in discharge lines at hand.
Flow Meter FLOWCON
- Efficient monitoring of pulsating flows
- Compact design and high product stability
- Simple handling
- Chemical feed ranges between 0.05 and 50 l/h
Further product views
| Housing material | PVC or PMMA | |
|---|---|---|
| Sealing material | FPM or EPDM | |
| Connection Inlet | Inlet: Union nut G 5/8 or G 3/4 | |
| Connection Outlet | Output: male thread G 5/8 or G 3/4 | |
| Dosing rang 1 | Solenoid-driven dosing pumps: 0.05...12 l/hr | |
| Dosing rang 2 | Motor-driven dosing pumps: 0.5...50 l/hr | |
| Max. system pressure | 10 bar | |
| Max. viscosity at stroke frequency 100/min | 20 mPas (20 cps) | |
| Max. viscosity at stroke frequency 150/min | 10 mPas (10 cps) | |
| Max. medium temperature | 35 °C | |
| Electric rating reed contact | 48 V AC/DC, 0.5 A, max. 12 VA |
Subject to technical changes
BA: Operation instruction
BW: Operation instruction
BB: Supplement
PI: Product information
MB: Dimension sheet
ET: Spare parts list
SD: Special design manual
We will be pleased to make you an offer.
Consultant
Frank Hamerski
Phone: +49 (0)5130 5802-30
Fax: +49 (0)5130 580268
frank.hamerski(at)lutz-jesco.com
Consultant
Andreas Kaspschak
Phone: +49 (0)5130 5802-91
Fax: +49 (0)5130 580268
andreas.kaspschak(at)lutz-jesco.com