Deutsch  Deutsch | english  Français
EASYPRO
 
 

Water Sampling Station EASYPRO

Controlled disinfection

The EASYPRO water sampling station enables standard-conform and continual measurement of the process water in public swimming pools, industrial plant and hot water installations up to 65 °C. The exact dosing of the disinfectant requires the constant measurement of the process water and the exact control of the dosing system. The modular design of the water sampling station enables its exact adaptation to suit your needs.  

 

Water Sampling Station EASYPRO

 
  • Measurement of the degree of disinfection (free chlorine)
    Measuring range: max. 10.00 mg/l
  • Measuring of the total chlorine quantity
    Measuring range: max. 10.00 mg/l
  • Measuring the conductivity
    Measuring range: max. 60 mS/cm
  • Measuring the pH value
    Measuring range: pH value 0 – 14
  • Measuring of the Redox potential
    Measuring range: 0 – 1000 mV
  • Measuring the temperature
    Measuring range: 0 - 100 °C
  • Reading in the digital display
  • Warning via red LEDs, should measured values leave
    the nominal range
  • Control of the downstream dosing systems
  • Automatic recording of the measured values
    via separate software possible
  • Easy to assemble: The water sampling station can be unlocked
    and opened using the lock (right-hand side)

Further product views

 
 
 
 
 
EASYPRO for public swimming pools LP-CLK-CLD-CLC-C
Measuring range free chlorinemg/l 0 – 10 (depending on the measuring principle)
pH value-dependent 5.5 – 8
Chlorine dioxide measuring rangemg/l --0 – 10 (depending on the measuring principle)-
pH measuring range 0 – 14
Redox measuring rangemV 0 – 1000
Total chlorine measuring rangemg/l max. 10 (depending on the measuring cell)---
Temperature°C max. 40 (with stop valve)
Water requirementl/h 30 approx.
Water pressurebar max. 1max. 6max. 1max. 6
Water inlet PE hose, 6/8 mm
Water outlet PE hose, 6/8 mm
Electrode materialMeasuring electrode Gold or platinum (depending on the measurement)
Reference electrode Silver / silver chloride with a KCl gel filling
Counter electrode Precious metal
Output signal total chlorine sensormA 4 – 20
 
EASYPRO for industrial plant and private swimming pools LA-CLB-CLE-C
Measuring range free chlorinemg/l 0 – 10 (depending on the measuring principle)
pH value-dependent 5.5 – 8
-
Chlorine dioxide measuring rangemg/l 0 – 10 (depending on the measuring principle)-
pH measuring range -0 – 14
Redox measuring rangemV --0 – 1000
Temperature°C max. 40 (with stop valve)
Water requirementl/h 30 approx.
Water pressurebar max. 6
Water inlet PE hose, 6/8 mm
Water outlet PE hose, 6/8 mm
Electrode materialMeasuring electrode Gold or platinum (depending on the measurement)
Reference electrode Silver / silver chloride with a KCl gel filling
Counter electrode Precious metal
 
EASYPRO for hot water installations LA-HLB-H
Measuring range free chlorinemg/l 0 – 10 (depending on the measuring principle)
pH value-dependent 5.5 – 8
Chlorine dioxide measuring rangemg/l 0 – 10 (depending on the measuring principle)
pH measuring range -0 – 14
Temperature°C max. 65 (without stop valve)
Water requirementl/h 30 approx.
Water pressurebar max. 6
Water inlet PE hose, 6/8 mm
Water outlet PE hose, 6/8 mm
Electrode materialMeasuring electrode Gold or platinum (depending on the measurement)
Bezugselektrode Silver / silver chloride with a KCl gel filling
Reference electrode Precious metal

Subject to technical changes

   
  
 

We will be pleased to make you an offer.

Consultant
Saied Ghasemi
Phone: +49 (0)5130 5802-32
Fax: +49 (0)5130 580268
saied.ghasemi(at)lutz-jesco.com

2988