Deutsch  Deutsch | english  Français
ChlorStop
 
 

ChlorStop

Pressure safety shutoff valve for chlorine gas systems

The pressure safety shutoff valve ChlorStop is designed to interrupt the chlorine gas supply or escape of chlorine gas directly from a chlorine tank following a chlorine alarm or the detection of positive pressure (e.g. by the safety blow-off valve PLUS).

The ChlorStop is fitted directly to the tank valve. The valve closes in the shortest-possible time through an electromagnet. This ensures the highest safety standard and prevents further escape of chlorine gas.

 

ChlorStop

 
  • Interruption of the chlorine gas supply directly from a chlorine tank valve
  • Shortest closing time with electromagnets
  • Direct connection e.g. for a chlorine vacuum regulator possible
  • Suitable for gaseous chlorine
  • Optional control unit for simultaneous closing of up to 12 valves
  • Simple start-up
  • Simple and space-saving installation
  • Low maintenance effort
  • For chlorine gas in accordance with DIN EN 15363 and 937

Further product views

 
 
 
 
 
ChlorStop
Nominal pressure PN16
Operating mode Closed current principle 100% ED
Reaction time upon triggerSec. 1 approx.
Power consumption per valveW 5
Supply voltageV DC 24
Protection class IP65
Ambient temperature°C 0 – 55
Material in contact with the media Monel, PTFE, brass (nickel-plated)
Weightkg 1.8
 
Control unit for ChlorStop
Voltage supply 110 – 230 V AC, 50/60 Hz
Control voltage 24 V DC / 5 W
Protection class IP65
Housing material Plastic
WeightWithout UPSkg 12 approx.
With UPSkg 15 approx.
Ambient temperature°C 0 – 55 (no direct sunlight)

Subject to technical changes

   
  
 
Top of PageSend Page  |  Print Page
3111