Deutsch
Control Valve C 7700
For a perfect dosing result
The chlorine gas flow is rarely controlled by hand in state-of-the-art chlorination installations according to DIN 19606. In the majority of cases, the concentration of free chlorine in the water is monitored by an electronic controller which sets the required chlorine gas quantity by means of an electrically operated valve.
Control Valve C 7700
- 3-phase switch or 4...20 mA
- Linear characteristic
- Mounted on wall plates
- Manually lockable at 100% opening
Further product views
| Flow rate with chlorine gas | up to 200 kg/hr | |
|---|---|---|
| Position feedback | 1000 Ohm | |
| Power supply | 230 V AC, 50-60 Hz, or 24 V AC | |
| Control | 3-phase switch (with 230 V AC), 4...20 mA (with 24 V AC) | |
| Protection class | IP55 | |
| Measurements | 320 x 660 mm | |
| Flow meter with manual setting (optional) | 4 g/hr ... 4 kg/hr (with chlorine gas) |
Subject to technical changes
LJ-Chlor_Regelventil_C7700-DE-BW.pdf- LJ-Chlor_Regelventil_C7700-DE-MB.pdf
LJ-Chlorine_Control_Valve_C7700-EN-BW.pdf- LJ-Chlorine_Control_Valve_C7700-EN-MB.pdf
- LJ-C7700-DE-PI.pdf
- LJ-C7700-EN-PI.pdf
BA: Operation instruction
BW: Operation instruction
BB: Supplement
PI: Product information
MB: Dimension sheet
ET: Spare parts list
SD: Special design manual
We will be pleased to make you an offer.
Consultant
Frank Hamerski
Phone: +49 (0)5130 5802-30
Fax: +49 (0)5130 580268
frank.hamerski(at)lutz-jesco.com
Consultant
Andreas Kaspschak
Phone: +49 (0)5130 5802-91
Fax: +49 (0)5130 580268
andreas.kaspschak(at)lutz-jesco.com